How do I configure my HP SAN switch?

How do I configure my HP SAN switch?

HP StorageWorks 8GB SAN Switch – Configuring the SAN Switch for Use in a Network

1. Obtain required items.
2. Power on the 8Gb SAN Switch.
3. Make a serial connection.
4. Power on the switch.
5. Set the switch IP address.
6. DHCP.
7. Setting a static IP address.
8. Set the switch date and time.

How do I log into my HP SAN switch?

Default username and password is “admin” and “password”.

What is HP SAN switch?

The HP StorageWorks 4/64 SAN Switch and 4/64 Power Pack offers flexible connectivity for a performance-level storage area network (SAN). The new switches can be incorporated into an extensive core fabric or placed at the edge. They deliver 32, 48 or 64 high performance Auto Sensing 1, 2, or 4Gbps Fibre Channel ports.

How do I backup my HP SAN switch?

Re: HP StorageWorks 4/16 SAN Switch how to backup you can access the switch administrator by the webinterface. Click the “show advanced mode” button an navigate to “configure”. On the bottom of the screen you will find a tab with the name “Upload/ Download”. The zoning is included in this file.

How do you set up a Brocade SAN switch?

Connecting to the CLI

1. Connect the workstation to the Ethernet network containing the HPE Synergy Frame Link Module.
2. Connect to the switch using ssh or open a Telnet connection using the IP address set earlier.
3. Enter the user name, using an administrative account.
4. Enter the password.
5. Verify the login was successful.

What is the proper command to change the effective zone configuration?

Run the zoneobjectrename command to change a zone configuration name. Run the cfgenable command to enable the renamed zone configuration.

What is Brocade switch?

Industry-leading Brocade switches are the foundation for high-performance connectivity in storage, IP, and converged network environments. These highly reliable, scalable, and available switches are designed for a wide range of environments—enabling a low TCO and fast ROI.

How do I save my configuration on my Brocade switch?

Backing up a Brocade switch

1. Establish a putty session to the switch and login as normal.
2. Enter the command configupload.
3. At the protocol selection prompt choose the protocol appropriate for you FTP server.
4. At the IP Address prompt enter the IP address of the FTP server Server Name or IP Address [host]: 10.10.10.5.

How do I reset my Brocade SAN switch?

In the CommandCentral Storage Console, display the Switches Summary (Managing > SAN > Switches.) In the table, click the name of the Brocade switch whose configuration you want to restore. In the drop-down list in the switch’s Overview pane, click Restore Switch Configuration and click Go.

How do I set my Brocade switch to factory settings?

Tap the “Enter” key a few times and the Brocade command prompt will display. Type the console password if requested and press the “Enter” key. Type “configDefault” and press the “Enter” key. The switch configuration is now reset to factory default settings.

What is SAN switch zoning?

Zoning is a procedure that takes place on the SAN fabric and ensures devices can only communicate with those that they need to. Masking takes place on storage arrays and ensures that only particular World Wide Names [WWNs] can communicate with LUNs on that array.

How do you collect logs from Brocade SAN switch?

Solution

1. Enter the IP or hostname of the Cisco or Brocade switch:
2. Make sure logging is turned on for “All session output” and then save the resulting putty.log file to a location of your choice.
3. For Brocade run the command supportshow.
4. For Cisco run the command show tech-support details.

How do I set up my hp switch?

Use the following command to configure an IP address on the Switch. After finishing the IP address configuration you need to connect a computer to the new HP Switch. On the computer connected to the new HP Switch you need to: Open a browser software, enter the IP address of your Switch and access the HP Switch web interface.

How to reset password for 8 / 24 SAN switch?

Re: password reset for 8/24 SAN Switch 1 Connect the serial console to the SAN switch (or director). (Default serial console settings: Baud rate â 9600, Data… 2 Reboot the switch 3 Press ESC at the message â Hit ESC to stop autoboot: â , the Boot PROM menu displays with the following options: More

How to view the running configuration of a switch?

To display the running configuration using the WebAgent: In the navigation pane, click Troubleshooting. Click Configuration Report. Use the right-side scroll bar to scroll through the configuration listing. Viewing a summary of switch operational data Syntax: show tech

How many ports does a Brocade SAN switch have?

A new esxi connected to san switch utilizing port that was currently used by other server. So I want to know exact way to view zoning info and editing it. When logged in to viewexplorer page, I could not see anything named zone or zoning. It is a 20 ports san switch. This is a Brocade model.