How to increase gear range in Chevy Equinox?
How to increase gear range in Chevy Equinox?
Press the plus/minus button on the shift lever, to increase or decrease the gear range available. When shifting to M (Manual Mode), the transmission will shift to a preset lower gear range.
Why does my Chevy Equinox have hard shifts?
When I put it in manual mode, it didn’t slip anymore which is how I drove it to the dealer but it gave hard shifts at the low gears, fine at the higher gears (3-6). Could be a bad syncro, torque converter or even some electronic sensor, who knows.
Where is the shift lever on a Chevy Equinox?
The automatic transmission shift lever is located on the console between the seats. P (Park): This position locks the front wheels. Use P (Park) when starting the engine because the vehicle cannot move easily.
How does the automatic transmission work on a Chevy Equinox?
The vehicle has an automatic transmission shift lock control system. You must fully apply the regular brake first and then press the shift lever button before shifting from P (Park) when the ignition key is in ON/RUN.
Press the plus/minus button on the shift lever, to increase or decrease the gear range available. When shifting to M (Manual Mode), the transmission will shift to a preset lower gear range.
How do you change the transmission on a Chevy Equinox?
2. Press the plus/minus button on the shift lever, to increase or decrease the gear range available. When shifting to M (Manual Mode), the transmission will shift to a preset lower gear range. For this preset range, the highest gear available is displayed next to the M in the DIC.
The automatic transmission shift lever is located on the console between the seats. P (Park): This position locks the front wheels. Use P (Park) when starting the engine because the vehicle cannot move easily.
Why does my Chevy Equinox transmission keep slipping?
Beginning recently, especially when the car is cold, driving up a hill results in the tachometer reaching 3,000 or 4,000 rpm’s and the car slowing to about 10 mph. Increasing the engine speed does not increase the speed of the vehicle, it is almost as if the transmission is “slipping”. Shifting into L2 helps a little.
