Why do I have no power to my fuses?
Why do I have no power to my fuses?
No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect. The problem started intermittenly when it reained heavily, now it has stayed that way regardless of weather.
Why does my Car Crank but not get fuel?
IT WILL NOT GET FUEL IN THEFT MODE , WHICH IS WHY YOH GET THE CRANK BUT NO START!!! unfortunately your car either forgot the key , or the key itself took some damage either way just have it relearn the key , put it in the on position , and leave it for 15 mins or so or get a new key and have it programmed , YW Was this answer helpful?
How do you turn off the power train?
Turn OFF the ignition. Disconnect the power train control module (PCM) harness connector. Connect a test lamp between the clutch start switch signal of the PCM harness and a good ground. Turn the ignition to the START position while pressing the clutch pedal.
No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect. The problem started intermittenly when it reained heavily, now it has stayed that way regardless of weather.
Where are the fuses on a silveradosierra?
No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect.
What causes low voltage on one row of fuses?
Q: low voltage on one row of fuses in inside fuse panel. All of the fuses on the right hand side of my inside fuse panel have low voltage and all of the systems on this row are not functioning what would cause this ? fuses 6, 12, 18 and 24 have 5.9 volts while all the others have 14.5 volts .
What causes a misfire on a CV fuse?
The CV joint… If you have a valve cover leaking oil onto the spark plugs then it can cause a misfire. This does not mean the leaks are the cause but a possible cause. I would recommend having a mechanic like one from…
Why is there no power to several fuses?
Last edited by Machster69 on Aug 13 2012, 6:29pm, edited 1 time in total. Check the feed wire to the fuse box. It could be corroded inside the insulation. Seems like about half of the fuses dont work- wonder if it has two seperate feeds going thru the firewall?
No power from about half of the fuses located on the side of the drivers-side dash. No blown fuses. I pulled the main fuse panel under the hood (thinking that it feeds the smaller panel on the dash), checked for power- all are good. Cleaned and reattached the main battery ground with no effect.
Can a fuse be turned off with zero volts?
If you find twelve volts on both test points, that fuse is good. If you find zero volts on both sides, that circuit is turned off. You are looking for any fuse that has twelve volts on one test point and zero volts on the other one.
How can you tell if a fuse is good?
The fuses inside are fed, in groups, from the larger fuses under the hood, so check those first. The large 30 and 40-amp spade-type fuses, (orange and green ones), have two test points on top. Use a test light to quickly check those. If you find twelve volts on both test points, that fuse is good.
