How do you reset the anti theft on a 2009 ford escape?
How do you reset the anti theft on a 2009 ford escape?
Did it work? To reset the anti theft system try inserting the key in the door lock and turn it on but do not turn it back. Hold for 40 to 60 seconds.
How to reset anti theft on 2010 ford escape?
To reset it, first go to the front of Your vehicle, and open the hood. Locate the positive cable attached to the battery, and remove it. Next, turn the ignition to the on or run position. Put the positive cable back on the battery, making sure the connection is not loose.
How to reset anti theft on 2005 ford escape?
Turn the car off. Remove the negative and then the positive cable from your car battery. With the battery disconnected, switch the car to “on” and press the horn or run the headlights to burn through any lingering energy. Wait a minute or two, and reconnect the battery, positive cable first.
How to turn off SecuriLock on Ford Escape?
Turn the ignition from the 1 (off) position to the 3 (on) position. Keep the ignition in the 3 (on) position for at least three seconds, but no more than 10 seconds. 3. Turn the ignition to the 1 (off) position and remove the first coded key from the ignition. 4.
What happens if you use the wrong key on a Ford Escape?
The use of the wrong type of coded key may lead to a “no-start” condition. Your vehicle comes with two coded integrated keyhead transmitters; additional coded IKTs may be purchased from your authorized dealer.
Where is the anti theft indicator on a Ford Escape?
Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle. The anti-theft indicator is located in the instrument panel cluster.
How to reset the anti theft system in a Ford?
1 Insert the key into the ignition and turn it on to the position where the accessories are activated but not the engine. 2 Leave the key in this position for at least 10 minutes. 3 Check the anti-theft light again. 4 Now try to start the engine. 5 Repeat the process at least a couple of times if it does not work the first time.
How do you unlock the doors on a Ford Escape?
1. Turn the ignition to the off position. 2. Close all doors, the liftgate and liftgate window. 3. Enter 5–digit entry code 4. Press and hold the 3 • 4. While holding the 3 • 4 press the 7 • 8. 5. Release the 7 • 8. 6. Release the 3 • 4.
How long does it take to lock a Ford Escape?
You must complete Steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. Note: All doors must be closed and remain closed throughout the configuration process. 1. The ignition must be off to begin sequence.
How does the SecuriLock system work on a Ford Escape?
• When the ignition is in the off position, the indicator will flash once every two seconds to indicate the SecuriLock system is functioning as a theft deterrent. • When the ignition is in the on position, the indicator will glow for three seconds to indicate normal system functionality.
Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle. The anti-theft indicator is located in the instrument panel cluster.
