Common questions

How much power can a stock 460 handle?

How much power can a stock 460 handle?

Depending on engine combo, engine application, components used, compression ratio, hp generated, operating rpms, executed block modifications/preparation/treatment, power adders, tune, and more: the 2-bolt blocks can support anywhere between 300hp-1500hp.

How much horsepower can a 460 make?

Registered. A 74 460 can make over 530 HP and 580 ‘ lb of torque on a budjet build.

How big of a camshaft do you need for a 460?

If you use a “factory cast iron exhaust manifold” and a factory “cast iron” intake manifold and limit the carb to “out of the box” 625 cfm – a BIG cam will simply lessen the torque a lot while only adding marginal horsepower. From what I’ve seen; stock class pulling isn’t about HORSEPOWER.

What kind of head does a Ford 460 have?

Ford D20E heads with 7cc valve reliefs, dominating the class ! Cemented block and suspected running race gas as we have no fuel testing yet. Once I joined this racing group 3yrs ago, I was approcahed to be a reference guy for ford data relating to heads and such as I have been on this site 5yrs and around 460 fords for 20yrs.

What kind of camshaft does a Ford truck have?

1 truck in particular has won 1st place 4 yrs in a row. Ford D20E heads with 7cc valve reliefs, dominating the class ! Cemented block and suspected running race gas as we have no fuel testing yet.

How big of a lift do you need for a 460?

You should atleast give them the SCJ cam lifts as a max lift as that is an OE cam, that’s just my opinion but my thoughts are you should be able to run lift as big as the max the factory installed in a passenger car. The chevy boys will still have a huge advantage with the LS6 cam being there largest which I believe was .588/.621.

Ford D20E heads with 7cc valve reliefs, dominating the class ! Cemented block and suspected running race gas as we have no fuel testing yet. Once I joined this racing group 3yrs ago, I was approcahed to be a reference guy for ford data relating to heads and such as I have been on this site 5yrs and around 460 fords for 20yrs.

If you use a “factory cast iron exhaust manifold” and a factory “cast iron” intake manifold and limit the carb to “out of the box” 625 cfm – a BIG cam will simply lessen the torque a lot while only adding marginal horsepower. From what I’ve seen; stock class pulling isn’t about HORSEPOWER.

1 truck in particular has won 1st place 4 yrs in a row. Ford D20E heads with 7cc valve reliefs, dominating the class ! Cemented block and suspected running race gas as we have no fuel testing yet.

What kind of compression does a Ford 460 have?

Ford 460 with RV cam. 110-120 Psi. compression at 5000′ cold. Flowmaster Delta 50 2 x2.5″ in 1 x 3.00″ out. Stock Autolite Copper plugs. I am trusting Bob at Competition Carburation.

Author Image
Ruth Doyle