What are special tools used in Brake Service?
What are special tools used in Brake Service?
Either way, a specially shaped brake bleeder wrench makes it easy to open and close bleeder valves on each caliper. Some examples we offer are the OEM Tools One Person Brake Bleeder Kit, CTA One Man Brake Bleeder Kit, and the Powerbuilt One-Man Brake Bleeder Master Kit just to name a few.
Do you need special tools to rewound caliper pistons?
Depending on vehicle application, some caliper pistons may need to be rotated (or “rewound”) back into the caliper housing – a specially designed universal adapter piece will make that process easy. Should you own more than one vehicle, you can consider a kit which offers adapters in multiple sizes.
What kind of tool do you need to change brake pads?
A brake pad spreader or even a large c-clamp comes in handy when pressing the piston into the caliper. With this tool, you can easily retract the piston. This will allow you to reset the piston, and therefore, you will be able to fit the new brake pads. While there are different ways to push the piston, but using a C-clamp is much easier.
Do you need special tools to remove brake rotors?
Special torx head bits or hex keys may be required to remove bolts which secure brake rotors in place. If you’ll be replacing brake rotors, removal of a small bolt or bolts that secure the rotor to the wheel hub is sometimes required. As with removal of calipers, an Allen Head (or hex) socket or Torx head socket may be necessary on some vehicles.
What do you need to know about differential tools?
Differential Tools Differential tools are necessary for anyone working with ring and pinion setups, whether it is an experienced professional or the DIY enthusiast. Bearing pullers, dial indicators, brass punches, spanner wrenches…all of these specialty tools are required to swap ring and pinion gears and get them set up properly.
What kind of differential tools does complete offroad use?
There are also differential tools that make the job quicker and easier. Complete Offroad manufactures the YT SA-01 Seal Press tool and the YT YH-01 Yoke Holder tool, both of which make the gear installer’s life better, and both of which are 100% USA made, assembled, and packaged.
What are special tools are available for suspension repair?
If you’ve ever done this type of work or attempted to do it, you know it can be trickier than merely loosening and tightening bolts. For example, rubber bushings may need to be pressed out, ball joints may need to be pried out of spindles, and coil springs often need to be compressed for removal and installation.
Which is Seal Press tool does complete offroad use?
Complete Offroad manufactures the YT SA-01 Seal Press tool and the YT YH-01 Yoke Holder tool, both of which make the gear installer’s life better, and both of which are 100% USA made, assembled, and packaged. Set up bearings help with quick and easy set up, and we carry high-quality Yukon bearings for Ford and Dana components.
