Where is the diagnostic trouble code p1316 stored?
Where is the diagnostic trouble code p1316 stored?
Additionally, EF signal is used to send diagnostics of IDM and electrical circuits of injectors to PCM. The Diagnostic trouble code (DTC) P1316 indicates that codes are stored in the IDM.
What does the p1316 Ford IDM code mean?
P1316 FORD Meaning The Injector Driver Module (IDM) provides EF output signal to the Powertrain Control Module ( PCM ) to confirm the proper timing/duration of Fuel Delivery Command Signal (FDCS) was received.
How to diagnose a p1316 ignition monitor code?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1316 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
How much does it cost to repair a p1316 Ford?
The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour. Ignition Driver Monitor Codes Detected is the generic description for the P1316 FORD code, but the manufacturer may have a different description.
What causes p1316 code on ignition driver monitor?
P1316 Possible Causes 1 Faulty Ignition Driver Monitor (IDM) 2 Ignition Driver Monitor (IDM) harness is open or shorted 3 Ignition Driver Monitor (IDM) circuit poor electrical connection
When to set the DTC on the p1336?
A DTC P1336 sets if the Crankshaft Position System Variation is not within an acceptable range, or can not be learned. Conditions for Running the DTC There are no crankshaft position (CKP) or camshaft position (CMP) sensor DTCs Conditions for Setting the DTC The PCM has not learned the Crankshaft Position System Variation
Additionally, EF signal is used to send diagnostics of IDM and electrical circuits of injectors to PCM. The Diagnostic trouble code (DTC) P1316 indicates that codes are stored in the IDM.
P1316 FORD Meaning The Injector Driver Module (IDM) provides EF output signal to the Powertrain Control Module ( PCM ) to confirm the proper timing/duration of Fuel Delivery Command Signal (FDCS) was received.
Can a 99.5 PSD start with code p1316?
I purchased a 99.5 psd in the spring with a dropped valve. Towed it home, removed the engine rebuilt and reinstalled. All new bottom end, rebuilt the heads and reused the injectors, (except the one in the bad hole). Now I’ve been struggeling with this P1316 code. What happens is the engine seems to crank and start like its out of fuel.
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. The cost of diagnosing the P1316 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city.
I purchased a 99.5 psd in the spring with a dropped valve. Towed it home, removed the engine rebuilt and reinstalled. All new bottom end, rebuilt the heads and reused the injectors, (except the one in the bad hole). Now I’ve been struggeling with this P1316 code. What happens is the engine seems to crank and start like its out of fuel.
