What kind of drive does a 2000 blazer have?
What kind of drive does a 2000 blazer have?
The 2000 Blazer was available in 2-wheel and 4-wheel drive options. The 4-wheel drive version was equipped with front drive CV-shafts or stub axle shafts. Removing a CV-shaft should take about 1 to 1 1/2 hours to complete, even if you have never done this before.
How do you lift the front of a Chevy Blazer?
Lift the front of the Blazer using a 2-ton jack or a jack with greater capacity. Place a jack stand beneath the front frame rail of the SUV, underneath the side on which you are working. Remove the wheel lug nuts with a tire iron, and remove the wheel assembly completely.
What kind of engine does a Chevy Blazer have?
The Chevrolet S-10 Blazer was introduced in 1983. The “S-10” nameplate was removed from the 1996 Blazer, as the full size Blazer became the Chevrolet Tahoe that model year. The 2000 Chevrolet Blazer was equipped with a 4.3-liter V-6, capable of producing up to 190-horsepower and 250-foot-pounds of torque.
How do you remove a cv shaft from a blazer?
Place a small pry bar between the inner end of the CV-axle and the transmission. Pry the CV axle free from the transmission, with the pry bar. Hold the CV shaft in your second hand so that it does not just drop out of the transmission. Remove the CV-shaft completely from the Blazer.
How do you remove axle nut from Chevy Blazer?
Place a jack stand beneath the front frame rail of the SUV, underneath the side on which you are working. Remove the wheel lug nuts with a tire iron, and remove the wheel assembly completely. Loosen the spindle or axle nut from the Blazer, using a 1/2-inch breaker bar and a 36-millimeter spindle nut socket.
When to replace the front axle on a blazer?
The front axle of your Chevrolet S-10 Blazer is important for steering your truck. If the axle is damaged in an accident, or it breaks somehow, you should replace it immediately to continue safely operating your S-10 Blazer. Thankfully, replacing the front axle is fairly straightforward.
Is it easy to replace a front wheel drive axle?
If you make a right turn, it’s usually the left side that’s bad and vice versa. Most axles are easy to replace and the one depicted in this video is fairly typical of what you run into. The main differences come in with how the lower ball joint is attached. I think this part will give you the most trouble.
The 2000 Blazer was available in 2-wheel and 4-wheel drive options. The 4-wheel drive version was equipped with front drive CV-shafts or stub axle shafts. Removing a CV-shaft should take about 1 to 1 1/2 hours to complete, even if you have never done this before.
Place a jack stand beneath the front frame rail of the SUV, underneath the side on which you are working. Remove the wheel lug nuts with a tire iron, and remove the wheel assembly completely. Loosen the spindle or axle nut from the Blazer, using a 1/2-inch breaker bar and a 36-millimeter spindle nut socket.
If you make a right turn, it’s usually the left side that’s bad and vice versa. Most axles are easy to replace and the one depicted in this video is fairly typical of what you run into. The main differences come in with how the lower ball joint is attached. I think this part will give you the most trouble.
Place a small pry bar between the inner end of the CV-axle and the transmission. Pry the CV axle free from the transmission, with the pry bar. Hold the CV shaft in your second hand so that it does not just drop out of the transmission. Remove the CV-shaft completely from the Blazer.
