Common questions

Should a fan belt be tight?

Should a fan belt be tight?

In many applications, the serpentine belt needs only to be reasonably tight. The belt should have about a half an inch of play when at the appropriate tightness. If there is less than a half an inch, the belt will need to be loosened, if there is more, it will need to be tightened.

Can I drive with a loose fan belt?

Don’t drive any vehicle with a squeaky loose serpentine belt, because it will cause a lot of damages to the vehicle if it comes off the pulleys and breaking up into pieces.

What’s the best way to tighten a drive belt?

Step 3: Add tension to the drive belt. Insert the pry bar above the alternator pulley. Apply gentle pressure upwards so that it adds tension to the drive belt. Once the drive belt is moved into its desired tension, tighten the adjustment bolt to lock the belt in place. Then, torque the adjustment bolt to the manufacturer’s specifications.

Where is the tensioner on the drive belt?

Step 1: Locate the drive belt tensioner. The drive belt assembly will have a specific component that tightens that belt. The tensioner may be found on the alternator or a pulley; it varies by vehicle and which belt is being tightened. This article will use an alternator belt tensioner as an example.

How can I tighten the belt on my alternator?

With the belt tight, bolt the alternator in place to maintain tension. Use a ruler to check to make sure the belt is under the proper amount of tension. Place the ruler along the belt and try to pull the middle of it away from the ruler. If it moves more than a half inch, it’s not tight enough. Loosen the tension on the belt.

How do you tighten a serpentine belt on a car?

Cars with a single serpentine belt that uses an automatic belt tensioner cannot have the drive belt tightened manually. Step 1: Don your protective gear and locate the drive belt Put on your safety glasses and gloves. Locate the drive belt – the vehicle may have more than one.

What kind of fan has a belt drive?

Belt driven fans are used in heating, ventilation, air-conditioning and cooling (HVAC) systems. The speed of a fan wheel versus the speed of the motor with a belt drive can be calculated as A synchronous electrical motor rotates with speed 1000 rpm. The motor pulley diameter is 76.5 mm and the fan pulley diameter is 205.5 mm.

Step 3: Add tension to the drive belt. Insert the pry bar above the alternator pulley. Apply gentle pressure upwards so that it adds tension to the drive belt. Once the drive belt is moved into its desired tension, tighten the adjustment bolt to lock the belt in place. Then, torque the adjustment bolt to the manufacturer’s specifications.

What should the tension be on a fan belt?

Check the belt tension. Test the tension at the area where the belt is the longest length between accessories. The amount of tension may be specific to the engine, but generally, it should have no more than about ½ to 1 inch of give.

Step 1: Locate the drive belt tensioner. The drive belt assembly will have a specific component that tightens that belt. The tensioner may be found on the alternator or a pulley; it varies by vehicle and which belt is being tightened. This article will use an alternator belt tensioner as an example.

Author Image
Ruth Doyle