Do you need a fan to install a transmission cooler?
Do you need a fan to install a transmission cooler?
If you place the cooler in and area with little air flow, a fan is a must When installing coolers, make sure lines are clear of anything that can rub them Always use line that is approved for transmission/hydraulic fluid Fuel line will not work and will break down in transmission fluid.
What are the lines on a transmission cooler?
Barb to Barb – Used to connect two rubber lines together. These fittings are common for when you install a transmission cooler and keep the existing rubber lines on the vehicle. This type of fitting is found on both the transmission and radiator where there is a pre bent transmission line.
How is a transmission cooler set up in a hot rod?
If you are mounting it in front of the radiator, always make sure the fin’s in the cooler are parallel with the fin’s in the radiator. This prevents restricting air flow to the radiator. Fuel line will not work and will break down in transmission fluid. Bypassing the radiator is the way we prefer a cooler be set up.
Can a transmission cooler be replaced after a failure?
A transmission internal failure is unlikely to put debris in the cooler, because all fluid coming from the transmission must travel through the trans filter. Its always a good idea to power flush a cooler or replace it after a failure. It is particularly important in the type of failure.
How to install transmission cooling lines on a Ford F150?
I struggled to install new transmission lines on my truck, trying to get the new part through the crowded space between the frame, suspension, drivetrain, ex… I struggled to install new transmission lines on my truck, trying to get the new part through the crowded space between the frame, suspension, drivetrain, ex…
What do you need to know about transmission cooler installation?
The below transmission cooler installation diagram shows the transmission fluid flow direction and how the fluid will be routed through a new external cooler. You will need to determine which line is the return for the transmission.
Where is the best place to mount a trans cooler?
Based on this, the best place to mount a cooler would be in front of the air conditioning condenser. This position will allow the trans cooler to get ample air flow while moving in addition to getting air from the engine’s cooling fans when stopped.
Do you need a transmission cooler for Drag Race?
In some applications however, it may be best to have a remote mounted transmission cooler that utilizes a fan to help cool the fluid. This is typically found in more extreme applications such as those who drag race or tow for example. Where ever your cooler is mounted, it needs to get enough air flow to help keep the fluid cool.
