How to set torque on big end bolts?

Fit the stretch gauge over the bolt and zero gauge. Tighten the bolt to desired stretch. Loosen second bolt. Fit the stretch gauge over the bolt and zero gauge. Repeat proceedures 6-11. Big end ARP stretch settings/torque settings.

How to determine the torque of a connecting rod?

STEP 1: Your Crower connecting rods came with a connecting rod specification tag. Check the tag to find the rod bolt part number used to fasten your connecting rods. Rod bolt length listed here is the measurement from under the head to the end. STEP 2: Use the chart below to determine the recommended lubricant, rod bolt stretch and torque amounts.

What are the torque settings for big end ARP?

Big end ARP stretch settings/torque settings. Firstly the bolt needs to be measured, as well as the text on the head of the bolt noted. Your Conrods should have been supplied with specific settings.

Where are the conrod bearings located on a car?

We also have access to the Mahle, Kolbenschmidt (KS), AE & Vandervell range. These shells are located at the larger end of the connecting rod. These shells may have certain characteristics such as oil holes & locating tags. The conrod bearings are made of different composite metals such as Silicon Aluminium, Lead Copper, Copper Silicone Silver.

Big end ARP stretch settings/torque settings. Firstly the bolt needs to be measured, as well as the text on the head of the bolt noted. Your Conrods should have been supplied with specific settings.

What’s the best way to tighten a conrod bolt?

Tightening procedure for Conrod bolts. Clean all threads and mating surfaces. Assemble Bearing cap onto rod (assuming bearing fitted and correct orientation). Apply correct lubricant (ARP moly assembaly lubricant usually) to the threads of the bolt, as well as under the head of the bolt. Finger tighten both bolts.

How to set torque on big end bolts?