What does the OBD II fault code p1351 mean?

OBD II fault code P1351 is a manufacturer specific code that most carmakers define as “Ignition Control Module Circuit Voltage”, or sometimes as “Ignition Control Module Circuit High Voltage”. This code is set when the PCM (Powertrain Control Module) detects an abnormal voltage in the control circuit of the ICM…

When does the PCM set the code p1351?

Nonetheless, regardless of the cause of the problem, the PCM will set code P1351 and illuminate a warning light when it detects an abnormal voltage in the control circuit of the Ignition Control Module. The image below shows a much-simplified schematic of a typical DIS ignition system.

What are the common causes of p1351 failures?

Below are some common causes of P1351-. Damaged, burnt, shorted, disconnected, or corroded wiring and connectors. Open circuits. Defective/damaged Crankshaft Position Sensors. Defective/damaged Camshaft Position Sensors (Where applicable)

How much does it cost to diagnose a p1351 code?

The cost to diagnose the P1351 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour. How much do you know about cars? When is the code detected?

What to do if your Chevy ignition code is p1351?

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals. The cost of diagnosing the P1351 CHEVROLET code is 1.0 hour of labor.

Can a leaking fuel pressure regulator set the p1351 code?

If it doesn’t hold, then you’ll need to check for a leaking injector causing a rich condition which would require a long crank time to clear out the excess fuel (which sets the code intermittently) before the engine willl start. It’s possible for the fuel pressure regulator to leak only when the engine is running. I’ve personally experienced that.

What do you need to know about the p1351 DTC?

The P1351 powertrain diagnostic trouble code (DTC) is a manufacturer specific code. The repair process varies depending on the make & model. Please refer to a repair manual specific to your year, make and model for more assistance, or sign up in the forums and ask your questions, totally free. OBD-II Trouble Code Technical Description

What is the DTC for powertrain OBD-2?

P1351 OBD-II DTC. The P1351 powertrain diagnostic trouble code (DTC) is a manufacturer specific code.

What does the P0300 OBD-II trouble code mean?

The P0300 trouble code indicates that there is a misfire in random or multiple cylinders. What causes the P0300 code? What are the symptoms of the P0300 code? How does a mechanic diagnose the P0300 code? Uses OBD-II scanner to retrieve freeze frame data and all of the trouble codes that have been stored by the Primary Control Module (PCM)

How much does it cost to diagnose the P0300 Chevrolet code?

The cost of diagnosing the P0300 CHEVROLET code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle’s make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour. When is the P0300 CHEVROLET code detected?

What does the P0300 code on an OBDII mean?

The P0300 code means that a cylinder(s) is misfiring or is randomly misfiring. Start by checking for intake leaks, intake gaskets are a common caused of multi-cylinder misfiring.

What is abnormal voltage in ignition control module?

Note that in the definition “Ignition Control Module Circuit Voltage”, the abnormal voltage could be either a high or a low voltage.

How does the p1351 ignition control module work?

P1351 Description. The Ignition Control Module (ICM) has independent power and ground circuits. The circuits between the ICM and the Powertrain Control Module (PCM) consists of the following circuits: The ICM sends 3X signals to the PCM, and controls the timing advance during engine cranking.

What does p1351 IDM input circuit malfunction mean?

P1351 IDM Input Circuit Malfunction/ Ignition Coil Control Circuit High Voltage. Not sure what it means though, but it’s what I have in my Obd list, must be relating to your coil. Hope it helps. How did you find Peugeot Central?:

What causes a p1351 voltage to go up?

What does the DTC code p0320 stand for?

Diagnostic Trouble Code (DTC) P0320 stands for “Ignition/Distributor Engine Speed Input Circuit.” The PCM controls critical engine systems such as ignition and fuel delivery. To manage these, it needs to know the rotational speed and positional data of the crankshaft.

What causes the p0320 OBD-II trouble code?

P0322 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit No Signal P0323 OBD-II Trouble Code: Ignition/Distributor Engine Speed Input Circuit Intermittent What causes the P0320 code?

How does the p0320 code work on a Ford?

The P0320 code is triggered when the Engine Control Module (ECM) detects that there is no current at the ignition coil group

What does the OBD II fault code p1351 mean?