How to troubleshoot Detroit Diesel engine series 60?
How to troubleshoot Detroit Diesel engine series 60?
DDEC II & III/IV Reader Carefully disengage the lock tab on the power harness and injector harness connectors. Remove the five (5) wire harness connections at the ECM. Remove the through-bolts holding the ECM to the engine. Remove the ECM and cold plate from the engine, if so equipped.
How to troubleshoot code 25 on Detroit Diesel?
If any code (s) other than code 25 is logged, refer to the Detroit Diesel Single ECM Troubleshooting Manual (6SE497). Always start and operate an engine in a well ventilated area. If operating an engine in an enclosed area, vent the exhaust to the outside.
Can a fault code be cleared from a DDEC II?
Fault codes can be cleared from the DDEC II and III/IV systems only by using a diagnostic reader. Follow the instructions supplied with the reader to clear the fault codes. Note: Before beginning any repair procedures, the ignition switch must be in the OFF position.
How to troubleshoot a Detroit Diesel single ECM?
If the basic mechanical checks fail to locate the problem, refer the Detroit Diesel Single ECM Troubleshooting Manual, (6SE497). Start by reading the “Basic Knowledge Required” section before attempting to diagnosis electrical faults. There are two diagnostic Data Readers (DDR) that can be used for diagnosis of DDEC I and DDEC II engines.
DDEC II & III/IV Reader Carefully disengage the lock tab on the power harness and injector harness connectors. Remove the five (5) wire harness connections at the ECM. Remove the through-bolts holding the ECM to the engine. Remove the ECM and cold plate from the engine, if so equipped.
If any code (s) other than code 25 is logged, refer to the Detroit Diesel Single ECM Troubleshooting Manual (6SE497). Always start and operate an engine in a well ventilated area. If operating an engine in an enclosed area, vent the exhaust to the outside.
Fault codes can be cleared from the DDEC II and III/IV systems only by using a diagnostic reader. Follow the instructions supplied with the reader to clear the fault codes. Note: Before beginning any repair procedures, the ignition switch must be in the OFF position.
If the basic mechanical checks fail to locate the problem, refer the Detroit Diesel Single ECM Troubleshooting Manual, (6SE497). Start by reading the “Basic Knowledge Required” section before attempting to diagnosis electrical faults. There are two diagnostic Data Readers (DDR) that can be used for diagnosis of DDEC I and DDEC II engines.
Can a 60 series Detroit shut off and not start back?
Have a Volvo dump truck with a 60 series detroit in it the truck was hauling a load and just shut off and will not crank back. I swaped the computer with another truck the computer is good. I replaced all the batterys still nothing does anyone have any idea,s thanks jeff Click to expand… Fuel pressure….transfer pump.
What to do if your Series 60 engine is not working?
If this is not the issue and you’re still experiencing throttle issues, you’ll probably want to take a look at your TPS (throttle position sensor). This sensor works with the electronic control system in drive-by-wire applications like the Series 60 engines, allowing for the electronic control to occur.
Are there any problems with the series 60 Detroit engine?
Coolant Leakage Older Detroit engines are prone to coolant leakage in the EGR (exhaust gas recirculation) system. Though the problem is not necessarily severe, it can lead to white tail pipe smoke, mild overheating and coolant loss over time. The Series 60 was one of the first in the industry to be offered with a drive-by-wire system.
If the basic mechanical checks fail to locate the problem, refer the Detroit Diesel Single ECM Troubleshooting Manual, (6SE497). Start by reading the “Basic Knowledge Required” section before attempting to diagnosis electrical faults.
If this is not the issue and you’re still experiencing throttle issues, you’ll probably want to take a look at your TPS (throttle position sensor). This sensor works with the electronic control system in drive-by-wire applications like the Series 60 engines, allowing for the electronic control to occur.
How much oil does a 2000 Detroit Series 60 use?
Vocational, Technical or Tra… I have a 2000 Detroit Diesel Series 60 that in just the last two days starting consuming huge amounts of oil like 3 gallons in two hours. There … read more
