What does the torque hub service manual say?
What does the torque hub service manual say?
It is designed for the customer or mechanic who is repairing this particular Torque-Hub® model. Users of this manual should note that each part mentioned is followed by an identification number enclosed in parentheses. These part numbers may be referred to in the Parts List and Assembly Drawing sections of this manual.
How much torque does a hub bearing have?
Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm
Which is the best torque hub for mobile applications?
Spicer® Torque-Hub®. Propelling Excellence. An ideal solution for mobile applications, the unique Spicer® Torque-Hub® planetary design offers cost benefits savings and other advantages.
How to service a torque hub planetary final drive?
1. Perform roll check and leak check prior to disassembling the unit. 2. Remove the magnetic Pipe Plug (6H) from Cover Plate (6A) and drain the oil out of the gearbox. NOTE:Record the condition and volume of the oil. 3. Remove eight of Bolts (17) followed by four of Bolts (18) from Cover Subassembly. 4. Lift the Cover Subassembly off of the unit.
It is designed for the customer or mechanic who is repairing this particular Torque-Hub® model. Users of this manual should note that each part mentioned is followed by an identification number enclosed in parentheses. These part numbers may be referred to in the Parts List and Assembly Drawing sections of this manual.
What is the torque of a hub nut?
First design nut (Pac-style nut painted black) 284 ft-lbs/385 Nm;second design nut (solid gray nut), 173 ft-lbs/235 Nm. [5] Tighten nut to specified value and tighten further to align cotter pin with hole. [6] Install and tighten new front axle wheel end nut to specification in a continuous rotation.
Where can I find the torque specification guide?
Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.
1. Perform roll check and leak check prior to disassembling the unit. 2. Remove the magnetic Pipe Plug (6H) from Cover Plate (6A) and drain the oil out of the gearbox. NOTE:Record the condition and volume of the oil. 3. Remove eight of Bolts (17) followed by four of Bolts (18) from Cover Subassembly. 4. Lift the Cover Subassembly off of the unit.
First design nut (Pac-style nut painted black) 284 ft-lbs/385 Nm;second design nut (solid gray nut), 173 ft-lbs/235 Nm. [5] Tighten nut to specified value and tighten further to align cotter pin with hole. [6] Install and tighten new front axle wheel end nut to specification in a continuous rotation.
Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.
What are torque specifications for front and rear axles?
Torque specification guide Front & rear axle nut torque specifications for FWD, RWD & 4 W/D vehicles One of the most common mistakes during installation is improper torque of the Axle nut. To guarantee the (Bearing, Spindle or Hub) is torqued correctly, follow the manufacture’s installation procedure.
