Is there a fault code reader for Freightliner Trucks?

This Heavy Duty code reader for Freightliner trucks enables you to read and erase the fault codes that relate to the check engine light on your truck. It will work with your specific truck as listed in the drop down boxes above, so please select.

What are the critical codes for Detroit Diesel?

Codes 43, 44,45,51 and 53 are critical codes and if they are shown; the Stop Engine Light will come on which causes the engine protections to engage and your engine may shut down. All other codes will cause the Check Engine Light to come on which will not engage the engine protections and will allow the engine to continue running;

When did the mid code go out for Freightliner?

* On March 7, 1997. If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997. 154 Auxiliary IN / OUT Status # 2 AUX INP / OUTP # 2 Aux. In / Out # 2 155 Auxiliary IN / OUT status # 1 AUX IN / OUT # 1 Aux.

What is the PID number on a Freightliner?

248 Total Power Pickup Hours TOTAL PTO HRS Total PTO Hrs. * On March 7, 1997. If there is no text message, the display area will be blank. Only the PID number will display. * On March 7, 1997. 43 AUTOSHFTHI GR HIGH Gear Act. 44 Low Gear Regulator AUTOSHFTLO GR Low Gear Act.

What are the fault codes for Freightliner engines?

Engine Fault codes (MID, PID, SID, FMI) FREIGHTLINER. Component Codes (MID) MID / Description / Old Text Message / New Text Message * 128 Engine # 1 ENGINE ENG 130 automatic transmission – † Trans 136 Anti-lock Brake System (ABS) TRCTR BRK Brake 140 Panel, Left INSTRCLST Instr 142 Panel, Right # 1 INSTRCLST MGMT 172 Diagnostic System DIAGNOSTC DIAG

Is there a way to clear check engine light codes?

You might have stalling and hard shifting problems for a while after reconnecting the battery. It will usually recover automatically, but it can take several drive cycles for this to happen. An easier way to clear the check engine light codes is to use an auto scan tool. These scanners have come a long way and now include better documentation.

Can You Check Engine codes without a code reader?

Checking engine codes without code reader is helpful when you don’t have a car code reader or you forgot your car code reader.

How to read GM OBD diagnostic codes for free?

How to read the codes 1 Ground terminals A and B (see diagram below) with the ignition “ON” and engine not running. The system will enter the… 2 After Code 12 is displayed, any stored trouble codes will be displayed by flashing the “CHECK ENGINE”, “SERVICE… More …

How to retrieve car trouble codes with no equipment?

If the link has 12 ports rather than 16, connect ports “A” and “B” with a paper clip or jumper wire. Watch the “Check Engine” light for codes as documented previously.

Do you need an OBD scanner to troubleshoot a car?

If owning an on-board diagnostics (OBD) scanner is not on your list of priorities, there’s no need to worry. Almost anyone at home can troubleshoot codes manually with cars that require OBD2 or OBD1. When a car’s dash lights appear, trouble codes are saved by your car when it realizes something is wrong.

How does the Isuzu diagnostic scanner fault code reader work?

With the code reader, you can quickly find out trouble causes (troubleshooter) of electronically controlled systems on your truck, by simply connecting the reader to the diagnostic socket, whilst reading the trouble code (DTC) shown on the device, and hence, identifying, locating and checking trouble causes.

What was the problem with my 2006 Freightliner C15 engine?

Hi I just had my 2006 freightliner with the c15 with only 484000 km into the shop about 6 times in the last 2 months, dam neer every part of the cooling system was replaced.

When did the mid number go out for Freightliner?

If there is no text message, the display area will be blank. Only the MID number will display. * On March 7, 1997. * On March 7, 1997. * On March 7, 1997.

What are the signs of a failing ECU?

Common signs of a failing PCM/ECM/ECU include the Check Engine Light coming on, engine performance issues, and the car not starting. 1. Check Engine Light Turns On

How to check fault codes DD15 Freightliner Cascadia?

Hold the button until the display shows “faults”. From there it will show you the number of active faults in the system. Again using the black button cycle through the “faults” to observe the SPN and FMI.

What kind of engine does a Freightliner fl50 have?

Caterpillar 3126B Engine, Diesel, 6 Spd Fuller transmission, 7000 Front Axle, 12,000 Rear Axle, 168″ Wheel Base, 19,000 GVW,, Spring suspension with air-ride cab and seats, Air Conditioning, Cruise… See More Details We’re sorry, we could not issue pre-approval based on the information provided.

What kind of equipment does a 1998 Freightliner have?

Has not been abused or neglected VIN-1FV6HFAA7WH892257 83,399 Miles Cummins Turbo Diesel AC AM/FM Air Brakes 6 Speed Manual Transmission Air Ride Seat GVW… 1998 Freightliner FL70 W/Dump Body and Fisher Plow Fisher Snow plow system Dump Body w/tarp Tool Box in between cab and body Heavy Duty Pintle hooks Ready to GO!

Is the caterpillar 3126cat used for Fire Rescue?

Someone correct me if im wrong but i read where the 3126Cat @ 330 h.p. is mainly for fire/rescue & ambulance use only . Thanks guys! That is the information I was looking for.

Do you need a check engine light reader?

These tools can take the guesswork out of reading and clearing Check Engine light codes on most models. Keep in mind that vehicles made since 1996 require an OBD-II reader, but some scan tools are able to read both OBD and OBD-II codes.

Which is the best heavy duty truck code reader?

The CReader HD plus is one of the top-of-the-line tools for reading, clearing, and diagnostic trouble codes on heavy-duty engines. This tool is not only a truck reader but also works with OBD2 engines as an auto scanner for all 10 OBD2 test modes.

How to read Check Engine light ( OBD-II ) codes?

The scan tool will power up as soon as it has been plugged in. Step 3: Read the codes in the computer. Each scan tool will have different instructions on how to operate it, so read yours carefully. Navigate to a heading called “Read Codes” and select it. Step 4: Record the codes that display.

Are there any scanners for heavy duty trucks?

(J1587, J1939 and J1708 Class 4- class 8 trucks) Additionally, this device is equipped to perform check engine diagnosis on all passenger cars and other lighter duty trucks built after 1996. It is important to keep in mind that this tool has certain features for certain heavy-duty trucks models.

Is there a fault code reader for Freightliner Trucks?