Common questions

Why does my Kubota bucket not go up or down?

Why does my Kubota bucket not go up or down?

JACUSTOMER-z334x8uy- : it does have quick disconnection hoses but i have never taken them off ever ,the front loader has never been disconnected from the tractor, when you use the controls you can feel the pressure in the hoses but the bucket wont open, close, or go up curtis b : The problem still sounds like a quick connector problem.

What causes a Kubota Tractor Loader to leak?

Start the tractor and raise the loader. If the bucket bleeds off, then you have a cylinder seal problem. If the bucket stays in the curled back position for an extended period of time, then your control valve is bad. Let us know what the results of the test are and we can go from there. Good luck.

Is there hydraulics on front of Kubota Tractor?

Hydraulics to front bucket will not lift. Any help will be greatly appreciated. Unfortunately I reversed it into the shed. Now I cannot remove the Backhoe in order to check the inlet valve on rear of tractor. Have checked hydraulic lines to the bucket.

What kind of loader do I need for Kubota bucket?

Kubota bx1800 with la211 loader. removed loader, replaced Kubota bx1800 with la211 loader. removed loader, replaced 4 hoses (raise and lower boom, dump and curl bucket) reattached bucket, I marked all of the hoses and their attachment points. The bucket rais…

JACUSTOMER-z334x8uy- : it does have quick disconnection hoses but i have never taken them off ever ,the front loader has never been disconnected from the tractor, when you use the controls you can feel the pressure in the hoses but the bucket wont open, close, or go up curtis b : The problem still sounds like a quick connector problem.

Kubota bx1800 with la211 loader. removed loader, replaced Kubota bx1800 with la211 loader. removed loader, replaced 4 hoses (raise and lower boom, dump and curl bucket) reattached bucket, I marked all of the hoses and their attachment points. The bucket rais…

Why does my front end loader go up but not down?

I switched the hoses for the bucket and loader and the loader spool operates the bucket correctly. When the loader is connected to the bucket spool selecting up moves the loader up as expected but selecting down causes the loader to also go up.

What kind of backhoe does a Kubota use?

MY TRACTOR IS A L3400-HST-F KUBOTA WITH THE LA463 LOADER PACKAGE AND BH80X WOODS 8FOOT BACKHOE.IT HAS LESS THAN 100 HRS ON TRACTO…  read more

What kind of loader does a Kubota use?

Kubota bx1800 with la211 loader. removed loader, replaced 4 hoses (raise and lower boom, dump and curl bucket) reattached bucket, I marked all of the hoses and their attachment points. The bucket rais…  read more Curtis B.

MY TRACTOR IS A L3400-HST-F KUBOTA WITH THE LA463 LOADER PACKAGE AND BH80X WOODS 8FOOT BACKHOE.IT HAS LESS THAN 100 HRS ON TRACTO…  read more

Where to put the load in the bucket on a tractor?

When driving with a load in the bucket, the best practice is to position the bucket just below the tractor hood for maximum stability and visibility. Do your best to load the bucket evenly and within the loader’s recommended capacity.

What kind of bucket does a Kubota Tractor use?

Kubota™ Quick-Attach Buckets Some of the compact, mid-sized and larger Kubota tractors use the optional Skid Steer Quick Attach (SSQA) carrier, also called the “2 Lever Quick Coupler” by Kubota™ on the front end loaders.

Kubota bx1800 with la211 loader. removed loader, replaced 4 hoses (raise and lower boom, dump and curl bucket) reattached bucket, I marked all of the hoses and their attachment points. The bucket rais…  read more Curtis B.

Can you attach a clevis bucket to a Kubota?

Some Kubota BX1880 / BX2380 / BX2680 / BX23S Sub-Compact models with the LA340 or LA344 loader may also have a new style SSQA bucket, these buckets have a very narrow top area that will NOT accept the regular Bolt-On Grab Hooks™ or Bolt-On Clevis Mounts™ like the other SSQA buckets shown above.

Why is the front of my tractor not lifting?

It won’t lift the front of the tractor. You can curl the bucket so it does and then hit the lift lever and it will expand the lifting cylinders, but it won’t squeeze them closed. Well i didn’t find out exactly what part failed, but it was six dollars and a whole lot more in labor. Oddly enough they messed up the bucket tilt now.

What are the features of the New Kubota diesel tractor?

KUBOTA DIESEL TRACTOR/M5660SUHD Built with the power to tackle a wide range of jobs, the new M5660SU brings new and enhanced features to the task, including Kubota’s easy-to-use hydraulic shuttle. SPECIAL UTILITY Everything you asked for and more: Power, Easy operation, Convenience. We asked what you wanted, and you told us. You wanted power.

How tall is a Kubota 50 ” bucket loader?

The maximum lift height is 78.8″ and can lift capacity up to 995 lbs. A 50″ bucket comes with the B3605 loader and it attaches to the front of the loader with four pins.

Why does my Kubota loader not lift up?

My son has a Kubota model 7610 tractor with model LA352-1 front end loader. The loader tilts OK but does not lift, or lifts only weakly. What would cause this? How to fix it?…  read more Curtis B. service manager Associate Degree 40,809 satisfied customers l300: BOOM&BUCKET CONTROL LEVER DOES NOT RESPOND..F..hydrolic..UP.

What kind of front end loader does Kubota use?

The B3605 front end loader is designed to fit Kubota B2320, B2620 and B2920 tractors which have a factory installed loader valve and joystick. The loader comes with most hydraulic lines in place, so installation is a breeze and only takes common tools.

How much weight can a Kubota backhoe lift?

When the dealer gets the machine it may be full, but when they ad the backhoe and FEL that level will drop. Get your RPM’s up when lifting to max capacity. Not that lower end on the rpm gage marked loader range. Crank it up for the heavy stuff. They are only rated for around 700 lbs.

What causes no pilot control on boom dipper?

Therefore, if you have no pilot control of boom, dipper, or bucket functions, the issue could be safety interlock related, or hydraulic, or damaged wiring, not the control module.

Why is the bucket on my truck not moving?

When i switch the diverter lever at the rear of the truck the turret hand levers is getting fluid pressure. You can hear it as you work the levers. But the bucket just won’t do anything. Its like something is restricting the flow. It never fast idles but I’ve had my guy throttle it up and no change

Why is my front end loader control lever not working?

When the control lever is moved to the left, it will not return to neutral by itself—-either with hydraulics pressured up or dead. The schematic suggests that it is the upper spring that is stuck in a compressed mode.

Why are the booms on my Bucket Truck not working?

I think it was a issue with the fiberglass on booms failing because of fatigue. They were nice, when new, as I spent a few hours flying one around power lines, back when. This was certified as late as 1997 by Atlantic electric before they gave it up.

Therefore, if you have no pilot control of boom, dipper, or bucket functions, the issue could be safety interlock related, or hydraulic, or damaged wiring, not the control module.

Can a bucket truck operate without outriggers down?

You can’t get much closer than that! crossy, NEVER operate without outriggers down and solid and leaks out of cylinders. You should identify your boom model and year of manufacture. There is suppose to be a tag on the pedestal by the dead man levers that says model, height, year, etc., if not its a little trickier but doable.

What are the attachments for a Kubota 3 point hitch?

3rd function valve kit allows for use of a grapple or 4 in 1 bucket Kit is complete with 1/2″ ag couplers. Free shipping within 1,000 miles! Tractor 3 Point Hitch Garden Bedder 69″, GB70 Deluxe, Stems, C-tines and sweeps, optional furrowing attachment Ships by Motor Freight.

Are there any attachments for a Kubota Tractor?

We have taken the time to hunt down a picture of your Kubota Tractor as well as the specifications for it. Then, we match that Kubota Tractor to our most popular American Made attachments that are a great fit and value for each individual tractor model.

Is the rear PTO engaged on the Kubota l3940?

Kubota L3940. The “semi-independent” mid PTO is linked with the rear PTO. Whenever the mid PTO is engaged, the rear PTO will also be engaged. The rear PTO can be run without the mid PTO.

What kind of PTO does a Kubota have?

The “semi-independent” mid PTO is linked with the rear PTO. Whenever the mid PTO is engaged, the rear PTO will also be engaged. The rear PTO can be run without the mid PTO. Engine details Two-post ROPS. Grand CAB on HSTC. Transmission details Kubota L3940 photos… Full dimensions and tires Attachment details

How big is a standard Kubota pallet fork?

Innovation is what we are all about at Everything Attachements. Standard Frame, Regular Lift, Pallet Forks 1PF 42″, 48″ & 60″ Sizes Available Free shipping within 1,000 miles! XTreme Duty, Wide Frame Pallet Forks 1PFWF, 42″, 48″ & 60″ Sizes Available Free shipping within 1,000 miles!

Author Image
Ruth Doyle