What are the JLG codes for scissor lifts?
What are the JLG codes for scissor lifts?
Popular JLG Scissor Lifts: 1 JLG 1930ES. 2 JLG 2030ES. 3 JLG 2032ES. 4 JLG 2630ES. 5 JLG 2632ES. 6 JLG 2646ES. 7 JLG 3246ES JLG troubleshooting diagnostic codes: If the number starts with….. it’s a 2-1 – Power Up Problem 2-2 – Platform Controls 2-3 – Ground
What should I look for on a JLG lift?
Description: The joystick signal is outside the acceptable range of 0.5V – 4.5V. Check: Center joystick and check to see if a power cycle will clear DTC. Description: The ground control box lift switch was closed up or down, during power up in ground mode. Check: Check if the lift switch is obstructed or jammed.
What causes a JLG aerial lift to stop working?
Check: Recharge batteries or check for damaged batteries. Description: Drive, steer, and lift prevented. Check: The system module applied field current, but could regulate the desired current. The situation is caused by improper field wiring or a damaged motor.
Where to get replacement parts for a JLG?
If you ever need JLG replacement parts or accessories, you can visit our website by clicking here. Description: Both platform and ground modes are selected simultaneously. Check: Key switch function, Check wiring to key switch function.
Is there a troubleshooting page for JLG scissor lifts?
That’s why we’ve come up with a troubleshooting page for you, this one specifically for JLG troubleshooting. Listed below are some popular JLG scissor lifts and their corresponding error codes, although not restricted to these models.
How big is the hydraulic tank on a JLG lift?
SECTION 1 – SPECIFICATIONS 3120878 – JLG Lift –1-1 SECTION 1. SPECIFICATIONS 1.1 CAPACITIES Hydraulic Oil Tank 1532E3/1932E3 14.0 liters (3.7 gallons) at full mark on tank 12.1 liters (3.2 gallons) at add mark on tank 2033E3/2046E3/2646E3/2658E3 14.8 liters (3.9 gallons) at full mark on tank 12.9 liters (3.4 gallons) at add mark on tank
What kind of wheel drive does JLG Industries use?
WHEEL DRIVE AND STEERING INSTALLATION – 1532E2 & 1932E2 FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
Check: Recharge batteries or check for damaged batteries. Description: Drive, steer, and lift prevented. Check: The system module applied field current, but could regulate the desired current. The situation is caused by improper field wiring or a damaged motor.
How to read the JLG lift maintenance manual?
1930ES 2030ES 2630ES 2646ES 3246ES 3121166 November 27, 2013 INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS 3121166– JLG Lift –a SECTION A. INTRODUCTION – MAINTENANCE SAFETY PRECAUTIONS A. GENERAL This section contains the general safety precautions which must be observed during maintenance of the aerial platform.
What are the error codes on JLG aerial lifts?
Error Code: 212; Fault Message: Faulty Keyswitch. Description: Both platform and ground modes are selected simultaneously. Check: Key switch function, Check wiring to key switch function. Error Code: 221; Fault Message: Horn Permanently Selected. Description: The horn switch was closed during power-up in platform mode.
How to troubleshoot a JLG aerial lift horn?
Check: Check if the horn is damaged, obstructed or jammed. Description: The joystick signal is outside the acceptable range of 0.5V – 4.5V. Check: Center joystick and check to see if a power cycle will clear DTC. Description: The ground control box lift switch was closed up or down, during power up in ground mode.
When to use JLG remanufactured lift parts?
Remanufactured parts are an economical way to keep machines in working order. JLG Reman offers reliable, factory-approved parts that come with a one-year warranty and are ideal for repairing older equipment. Don’t waste time and money looking for substitutes.
Check: Check if the horn is damaged, obstructed or jammed. Description: The joystick signal is outside the acceptable range of 0.5V – 4.5V. Check: Center joystick and check to see if a power cycle will clear DTC. Description: The ground control box lift switch was closed up or down, during power up in ground mode.
Error Code: 212; Fault Message: Faulty Keyswitch. Description: Both platform and ground modes are selected simultaneously. Check: Key switch function, Check wiring to key switch function. Error Code: 221; Fault Message: Horn Permanently Selected. Description: The horn switch was closed during power-up in platform mode.
