Is there an electrical problem with my Bobcat 873?
Is there an electrical problem with my Bobcat 873?
Neighbor had a 873 with the exact same symptoms. Hi, Also looking for electrical diagram and or manual for my bobcat 863 I just purchased. SN514441897. any info/links would be great. My machine is giving a glow plug alarm “GLO 09” would like to test relays, fuses, ect. but not sure what to test without drawings.
Why does my 863 Bobcat not start up?
I have a 863 Bobcat that blows the alternator/ accessory fuse immediately upon turning the key to start the machine. Afterwards the machine must stop charging the battery and after 20-30 minutes or so engages the transmission lock. Then the battery is dead and will not restart the machine.
Where is the alternator on an 863 Bobcat?
Might not help but track machines were good for harness chaeffing at left rear of cab where it heads down from the roof. Sometimes u could see it arcing in the dark. Its the alternator. Neighbor had a 873 with the exact same symptoms.
Can a bad alarm blow the fuse on a bobcat?
Click to expand… the backup alarm and switches are on the same fuse with the alternator. ive never seen a bad alarm blow the fuse, but if the plate that activates the switch touches the one next to it, it will blow the fuse every time. if it had an alarm on it, and it’s been removed, tape up the wiring on the tailgate..
Neighbor had a 873 with the exact same symptoms. Hi, Also looking for electrical diagram and or manual for my bobcat 863 I just purchased. SN514441897. any info/links would be great. My machine is giving a glow plug alarm “GLO 09” would like to test relays, fuses, ect. but not sure what to test without drawings.
I have a 863 Bobcat that blows the alternator/ accessory fuse immediately upon turning the key to start the machine. Afterwards the machine must stop charging the battery and after 20-30 minutes or so engages the transmission lock. Then the battery is dead and will not restart the machine.
Might not help but track machines were good for harness chaeffing at left rear of cab where it heads down from the roof. Sometimes u could see it arcing in the dark. Its the alternator. Neighbor had a 873 with the exact same symptoms.
Why is my Bobcat not restarting after charging?
Afterwards the machine must stop charging the battery and after 20-30 minutes or so engages the transmission lock. Then the battery is dead and will not restart the machine. It use to blow a fuse every once in a while and now has been happening with almost every startup. My thoughts are this should make it easier to find the problem now.
What kind of engine does the bobcat 863 have?
1. Engine. When it comes to Bobcat 863 specs, one notable feature of this skid steer loader is its powerful four-cylinder turbo-charged Deutz engine with diesel fuel and oil cooling. This engine features power that is rated at 73 hp.
What is the repair manual for a bobcat?
Bobcat 463 Skid Steer Loader Service Repair Manual ( S/N 520011001 & Above, S/N 519911001 & Above ) Bobcat 463 Skid Steer Loader Service Repair Manual ( S/N 538911001 & Above, S/N 539011001 & Above )
What is the problem with my Bobcat 863?
i have a bobcat 863, with front auxillary hydraulic electrical problems. When you lock the auxillaries in, they work fine for a few seconds or minutes, then the light starts flashing and they stop working. If you turn the machine off then on, they will start working again. I thought it was the solonoids so i replaced them and it still is doing it.
How to change aux solenoids on bobcat 863?
DDG : You can try switching the two aux solenoids around with each other on the valve. Disconnect the solenoid connectors, and then Swap the solenoids but keep the electrical connectors in the correct place on the valve so forward and reverse flow controls work correctly, and reconnect the electrical connectors.
Why are the auxillaries on my Bobcat not working?
When you lock the auxillaries in, they work fine for a few seconds or minutes, then the light starts flashing and they stop working. If you turn the machine off then on, they will start working again. I thought it was the solonoids so i replaced them and it still is doing it.