What does code p1693 mean on a Dodge 1999 Cummins diesel?
What does code p1693 mean on a Dodge 1999 Cummins diesel?
Good afternoon, P1693 is a basic code that means that there is a code in the other companion module such as the engine controller (cummins) or the powertrain control module (dodge). Inorder to check it further you will need to use a scanner that can access both the Cummins and Dodge control modules to see what codes are found.
What kind of engine light is p1693 DTC?
2000 Dodge Ram 2500 4WD. 142,000 miles. Started bogging out at around 3000rpm and intermittent. Check engine light P1693 dtc stored in companion module. took to Dodge dealer they replaced pcm and reprogrammed.
Where can I find turbo charge code p1693?
Since code P1693 only serves to indicate the presence of other stored codes in either or both control modules, the stored codes must be extracted with a suitable scan tool or code reader.
What to do when you get a p1693 code?
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Usually, the P1693 code is combined with another code (e.g. P0216). Check repair for other codes first. What does this mean?
Good afternoon, P1693 is a basic code that means that there is a code in the other companion module such as the engine controller (cummins) or the powertrain control module (dodge). Inorder to check it further you will need to use a scanner that can access both the Cummins and Dodge control modules to see what codes are found.
How much does it cost to repair a p1693 Dodge?
The cost of diagnosing the P1693 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
2000 Dodge Ram 2500 4WD. 142,000 miles. Started bogging out at around 3000rpm and intermittent. Check engine light P1693 dtc stored in companion module. took to Dodge dealer they replaced pcm and reprogrammed.
Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Usually, the P1693 code is combined with another code (e.g. P0216). Check repair for other codes first. What does this mean?
What does companion code p1693 stand for?
P1693 is considered the “companion code”. It is triggered when the powertrain control module (PCM) detects a code that us not actually associated with the PCM. Usually, the code is related to the ECM, or the engine control module.
The cost of diagnosing the P1693 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
What does p1693 mean on a Dodge Ram?
Verified Good afternoon, P1693 is a basic code that means that there is a code in the other companion module such as the engine controller (cummins) or the powertrain control module (dodge). Inorder to check it further you will need to use a scanner that can access both the Cummins and Dodge control modules to see what codes are found.
What is code p1693, p0122 for Cummins?
Shops are reporting code P1693, P0122 issues when replacing the accelerator pedal position sensors (APPS) on Dodge vehicles with the 5.9L engine. The APPS must be adjusted properly to achieve a reading of .59-.65 volts on the light blue wire with a black tracer.
Since code P1693 only serves to indicate the presence of other stored codes in either or both control modules, the stored codes must be extracted with a suitable scan tool or code reader.
Can a trouble code be erased on a ram truck?
ECM operates in backup mode if sensors fail, to enable vehicle to be driven to repair shop. • Trouble codes can only be erased by using a Scan Tool connected to the data link connector (DLC).
What kind of problem does a ram truck have?
Signal wire open circuit/short circuit, valve body, sensor supply wire open circuit, transmission fluid level, governor pressure solenoid, transmission mechanical fault, ECM 2 -no 5 volt supply f)
Where was the 1999 Dodge Ram 2500 last serviced?
Mileage: 172,531 miles Body Type: Pickup Color: Burgundy Engine: 8 Cyl 5.9 L Accident reported. Purchased on 04/28/99 and owned in OH until 08/30/16. Driven an estimated 4,676 miles/year. Last serviced in Painesville, OH on 10/28/08 • Vehicle serviced • Steering/suspension checked.
What does the companion code p1693 mean?
Thats not what that code is… P1693 is the companion code…it means that there may be another code stored and you need to use a OBDII scanner to extract it. If I was a betting man I bet it will be P0216….Injection Pump timing failure…
How many miles does a 1999 Dodge Ram have?
Mileage: 227,200 miles Body Type: Pickup Color: White Engine: 6 Cyl 5.9 L No accident or damage reported to CARFAX. Purchased on 05/12/99 and owned in WA until 05/21/21. Driven an estimated 7,827 miles/year.
What is the fault code on a Dodge Ram 2500?
Moreover, all stored fault codes must be cleared from both the ECU and PCU after repairs are complete in order to prevent a recurrence of code P1693. 2000 Dodge Ram 2500 4WD. 142,000 miles. Started bogging out at around 3000rpm and intermittent.
How to call Cummins for a diesel engine?
Call us at 1-866-737-4966 with any questions you may have about your diesel. We are a authorized Cummins dealer, call us for diesel parts: P0008 ENGINE POSITION SYSTEM PERFORMANCE BANK 1
What to do if p1693, p0122 code returns?
If the P1693, P0122 codes return, then you’ve got a connection problem. This can be common after replacing the APPS. Remove the connector from the APPS and inspect the pins and wiring for breaks or corrosion.
