Common questions

Why is my Chevy Silverado not shifting to 4wheel drive?

Why is my Chevy Silverado not shifting to 4wheel drive?

My 2000 G M C 1500 electric shift to 4wheel drive works just part of the time. probably trouble with the shift motor at transfer case ? also the right running light burns out every few weeks and the socket is badly burnt. Sounds like a problem I just had fixed.

Why do I hear grinding noises in my transfer case?

In many cases, these noises are caused by the reduction of lubricants inside the transfer case or metal-to-metal grinding. It’s pretty obvious to most vehicle owners that metal grinding together is never a good thing, so if you hear noises coming from the area where your transmission is located, contact a mechanic as soon as possible. 3.

Where is the encoder motor on a GM transfer case?

Access to datastream information for GM’s NVG 246 system makes most problems simple to locate and diagnose, as our case studies demonstrate. These systems also allow bidirectional control for many outputs. The encoder motor (arrow) is mounted on the front of the transfer case and is used to lock it into 4WD.

Why does my Chevy Silverado default to 4WD?

Defaults to 4HI after I switch the ignition on 5 sec off 5 sec then on 10 sec.,will also switch to Auto 4WD. 2. Depressing dash buttons runs 4WD Frt Axle Actuator with whining then vibrating grinding noise at end of cycle. Acts like the actuator is trying to shift gears but overloads, then shuts down when trying to switch to 2Hi or 4Low.

Why does my Silverado 4×4 make a grinding noise?

I am unable to put it in gear without that noise. It sounds like it is coming from the transfer case. A friend told me sometimes they will get stuck between gears and by playing with the shifter for transfer case you can get it to go back. No luck ther.

Why is my GM transfer case grinding noise?

Rear bearing came apart, chewed up the pump, the reluctor wheel rubbed on the speed sensor, and rear bushing was worn. Completely overhauled T-case with parts listed below and she’s good as new. Here’s everything they replaced:

Where does the grinding noise come from in a truck?

When I stopped I put the truck in park and let it sit running for a minute and when I put in reverse the same very loud grinding started again. I am unable to put it in gear without that noise. It sounds like it is coming from the transfer case.

Why do I hear a grinding noise when shifting gears?

In many instances, before shifting into four-low, the vehicle must be stopped and the transmission placed into neutral. Otherwise, you’ll hear a grinding noise when trying to shift gears. Note that while some transfer cases are controlled by the body computer, transfer cases on most modern vehicles are electrically-switched.

Is there a problem with my Chevy Silverado?

I’m not sure if you found the problem or not but I have an 07 Silverado that had the same problem. Driver control for Windows stopped working and a buddy of mine found a yellow wire going from the boot in the door to the fuse box that was broke along with a couple either wires.

What kind of engine does a Chevy Silverado 1500 have?

Replaced faulty evap vent solenoid valve Engine would stall while driving. Truck had to be brought to dealership. Oxygen Sensor was defective. Loaner vehicle was needed as replacement. 355-horsepower 5.3L V8 6-speed shiftable automatic 4WD w/low range 355-horsepower 5.3L V8 6-speed shiftable automatic RWD

Is there a problem with my GMC Sierra 4×4?

If it was 4Lo, then the problem is not in the front diff. – the diff. doesn’t have two speeds. Once you figure it out and do the repair, make sure you take it offroad and put it through the paces to make sure there was no damage. You don’t want to find out when you really need 4×4 and it’s not available.

Are there any problems with the Chevy Silverado?

Check out our Chevrolet Silverado overview to see the most problematic years, worst problems and most recently reported complaints with the Silverado.

Is the 2005 Chevy Silverado 1500 a good truck?

Recently bought my 2005 ext-cab Z71 silverado 1500 a few months ago, used with 90,000 miles on it. I’m the second owner. Good things: Engine is still very quiet and runs smooth for having 90K on it, great on gas, ride is smooth, 4wd still works, interior in great shape, no electrical or steering problems. Overall still a great truck inside and out.

How many miles does a Silverado 1500 drive?

1st owner purchased on 07/16/05 and owned in CA until 12/30/05 • 2nd owner purchased on 12/30/05 and owned in CA until 12/31/12 • 3rd owner purchased on 05/24/13 and owned in CA until 06/13/21. 1st owner drove an estimated 0 miles/year • 2nd owner drove an estimated 12,470 miles/year • 3rd owner drove an estimated 16,525 miles/year.

When to troubleshoot the electrical system in a Chevy Silverado?

This happens sometimes when trailer wiring has been added, causing electrical system problems. Consider having the BCM or Body Control Module replaced if your Silverado repeatedly blows out the same fuses or if it seems like you’re experiencing one electrical problem after another.

My 2000 G M C 1500 electric shift to 4wheel drive works just part of the time. probably trouble with the shift motor at transfer case ? also the right running light burns out every few weeks and the socket is badly burnt. Sounds like a problem I just had fixed.

How to test shift solenoids on GM 4.3L?

In this article, I’ll show you how to test the transmission shift solenoids (specifically 1-2 solenoid and 2-3 solenoid) on your GM 4.3L, 5.0L, 5.7L pick up, van, SUV. You’ll be surprised just how easy it is to diagnose these shift solenoids when they have failed.

Where is the shift encoder motor on a Silverado?

The Shift Encoder Motor is located on the outside of the transfer case and is secured to the transfer case with 3 bolts. If your truck will not switch into 4×4 mode a faulty Shift Encoder motor maybe the cause. 2007 Chevrolet Silverado 1500 Classic & 1500 HD Classic Does this Fit my Truck?

How to switch from 4WD to 4HI in Chevy Silverado?

1. Defaults to 4HI after I switch the ignition on 5 sec off 5 sec then on 10 sec.,will also switch to Auto 4WD. 2. Depressing dash buttons runs 4WD Frt Axle Actuator with whining then vibrating grinding noise at end of cycle.

What was the problem with my Chevy Silverado transmission?

It is a normal chevy issue I must deal with Differential went out – repaired by dealer at owner’s expense. Transmission went out immediately upon return. Transmission replaced and went out again a week later. Transmission replaced again, at owner’s expense. Small leak at transmission pan so had tranny fluid and filter changed while pan was off.

1. Defaults to 4HI after I switch the ignition on 5 sec off 5 sec then on 10 sec.,will also switch to Auto 4WD. 2. Depressing dash buttons runs 4WD Frt Axle Actuator with whining then vibrating grinding noise at end of cycle.

What kind of suspension problem does Chevy Silverado have?

355-horsepower 5.3L V8 6-speed shiftable automatic RWD Upper ball joint failure on both left and right sides, truck was making a knocking noise while going over bumps, covered on warranty. 355-horsepower 5.3L V8 6-speed shiftable automatic 4WD w/low range Bad vibrations at interstate speeds.

What’s the weight of a 2002 Chevy Silverado?

The 1500 HD has a Crew Cab configuration with four conventional, front-hinged doors. The Silverado’s payloads range from 1,593 to 3,224 pounds, and light-duty models come in gross vehicle weight ratings (GVWR) from 6,100 to 8,600 pounds.

Is there a Quadrasteer for the 2002 Chevy Silverado?

Quadrasteer is scheduled to become available for the Silverado during the 2002 model year. This report covers light-duty versions of the Silverado only, which come in 1500 (half-ton) and 2500 (three-quarter-ton) series. Heavy-duty models are covered separately in the Silverado HD report.

Where did the 2002 Chevy Silverado 1500 come from?

1st owner purchased on 02/15/02 and owned in PA until 03/20/16 • 2nd owner purchased on 04/02/16 and owned in PA until 07/20/20 • 3rd owner purchased on 10/14/20 and owned in OH until 04/16/21. 1st owner drove an estimated 7,018 miles/year • 2nd owner drove an estimated 6,120 miles/year • 3rd owner drove an estimated 0 miles/year.

How do I reset Transmission Control Module Chevy Silverado?

I have a 2001 Silverado. To reset my TCM I turn on the key to the on position press the gas pedal to the floor for 10 seconds and then turn the key off then release the gas pedal and wait about 5 minutes to restart the engine. I have a 1999 Chevy 1500 I rebuilt the transmission so when I put it in drive its like it take off in high gear.

What’s the gear shifter button on a GM Truck?

From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. Nope, it’ll be totally off. I just meant for the purposes of comparison, you can cruise around at just about any speed (assuming it’s not too fast) and literally use the + & – to turn DFM

When do I use the manual shift button?

Typically the only time I use the manual shifting is in 4Lo and climbing grass/gravel slopes or tiptoeing through rocky creeks. I hate the buttons, as I have to take my eyes off the trail to find the toggle buttons.

Author Image
Ruth Doyle