Do you need to remove struts on 1993 Lumina?
Do you need to remove struts on 1993 Lumina?
On a 1993 Lumina for example, you need to remove the half shaft to properly remove the strut. For this project, you will need one or more special tools to complete the job. However, you may be able to rent these special tools at your local auto parts stores, if necessary.
Can you replace the knuckle assembly on a Chevy Lumina?
Replacing the strut and knuckle assembly on your Chevy Lumina may be an involved process, if you own one of the earlier models. On a 1993 Lumina for example, you need to remove the half shaft to properly remove the strut. For this project, you will need one or more special tools to complete the job.
Is there a quick way to replace struts?
They get worn out with use and sometimes will break if you’ve gone over some particularly bumpy terrain, resulting in a kind of deep click sound when you turn. Purchasing a quick-strut assembly is the quickest and easiest way to replace the struts yourself. Below, you can learn to remove the old strut and replace a new assembly.
What happens if you remove the center nut on a strut?
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts.
They get worn out with use and sometimes will break if you’ve gone over some particularly bumpy terrain, resulting in a kind of deep click sound when you turn. Purchasing a quick-strut assembly is the quickest and easiest way to replace the struts yourself. Below, you can learn to remove the old strut and replace a new assembly.
Do not remove the center nut or the strut will come apart and it is under high spring tension. Since you’ve removed the bolts from the steering knuckle, the strut might fall loose after you remove these bolts. It might help to have a partner holding onto the strut assembly while you loosen these bolts.
Do you need a compressor to change struts?
It’s recommended that the beginner forego attempts to compress the spring on the old strut using a spring compressor or spring clamps. This method is used to save money by salvaging the old spring and installing it on the new strut, but if you don’t have your own strut compressor, it will run you $700.
Where are the strut bolts located on a car?
Once the strut bolts are out the strut and steering knuckle are separated. Open the hood and locate the strut towers to remove the bolts. Usually they are located at the midpoint of the inside fender well and look like cylinders. They are most likely held in by three small bolts. Remove the strut tower bolts.
