Can you hook up an amp to a stock radio?
Can you hook up an amp to a stock radio?
Another popular way to connect an amplifier to a factory radio is to use something called a line output converter. It connects to the factory radio’s speaker wires and converts the speaker-level signal to a preamp-level signal. This lets you use RCA cables to run that signal to your amplifier.
What color is power on a radio?
However, typically the red wire indicates “Power,” black indicates “Ground,” yellow indicates “Remote,” and striped, multicolored wires indicate speaker wires. Identify the function of each wire on the new stereo which you plan on wiring to your car using your stereo wiring diagram.
How many amps does a stock radio use?
A typical stereo head unit will need about 5 amps of power. If you want to crank up the volume for parties and plan on using a powerful amplifier, then 5 amps likely won’t be enough either. We do have power supplies available that offer up to 30 amps. Some people will use computer power supplies and they work great.
What do you need to connect an amp to a factory radio?
You’ll need one for the amp’s input and the other for its output. These cables will act like a “T-harness” to connect your amp to the factory system. Behind the factory radio, you can access all of the speaker wires in one place.
Where do the red, yellow and Black Stereo wire colors go?
If you have purchased a brand new car stereo and wish to install the stereo on your own, then you will need to know where the red, yellow, and black stereo wire colors go when attaching them to the stereo. The stereo wire colors include blue, white, purple, grey and orange.
What’s the best way to wire an amp to a stereo?
Run the power wire to your amp. If you have a stock stereo and you have the remote wire there you want to in twine the remote wire with the power wire before inserting in the power slot for amp. The remote wire tells the amp to turn on.
Can you connect an amplifier to an aftermarket stereo?
If you have an aftermarket stereo, you’ll use a set of RCA cables instead of one of the 9-wire cables below. Refer to our article about adding an amp to an aftermarket stereo for more details. Usually, you’ll be installing a 4-channel amplifier with speaker-level inputs.
You’ll need one for the amp’s input and the other for its output. These cables will act like a “T-harness” to connect your amp to the factory system. Behind the factory radio, you can access all of the speaker wires in one place.
How to add an amplifier to your car stereo system?
Connect your remote wire to a 12v switched source that only powers when the car is running and run that down with your other wires to your amp and connect that to the remote wire input on your amp. Run your 12v batter wire from your battery to your amplifier. Connect your ground wire to a chassis ground in vehicle free of paint.
When does an amp turn on in a car?
The amp turns on when an input signal is present. This means you don’t use the ninth wire (the blue wire) of either cable for this installation. Before you run these two 9-wire cables through your car, mark both ends of one cable with a piece of electrical tape.
How do you bypass a factory radio AMP?
So we helped him wire the radio in a way that safely let us switch between the amp integration and bypass setups to compare the sound. To bypass factory amp, Dave simply unplugged the cable from the amp and plugged it into the bypass harness’s plug. How did it sound?
