What does the low voltage code p0137 mean?

What does the low voltage code p0137 mean?

More specifically, this means that the PCM is detecting a low voltage from the #2 O2 sensor in Bank 1. Code P0137 triggers when the PCM detects that the signal from oxugen sensor 2 on Bank 1 is below a specific value for a certain amount of time. The Bank 1 portion of the code refers to the side where the #1 cylinder is located.

What causes the O2 sensor circuit low voltage code?

This code occurs when the engine control module (ECM) sees the voltage of the O2 sensor for bank 1 sensor 2 below .21 volts when the ECM has commanded the fuel to a targeted rich condition on that bank of the engine. What causes the P0137 code? The ECM detects the low voltage problem and turns on the Check Engine Light.

What is the voltage of the ho2s sensor?

The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean. The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information.

What are the symptoms of the O2 sensor code p0137?

What are the symptoms of the P0137 code? 1 The engine will run rich during the testing of the sensor for problems. 2 The Check Engine Light will be illuminated. 3 You may have exhaust leaks before or near the O2 sensor in question.

More specifically, this means that the PCM is detecting a low voltage from the #2 O2 sensor in Bank 1. Code P0137 triggers when the PCM detects that the signal from oxugen sensor 2 on Bank 1 is below a specific value for a certain amount of time. The Bank 1 portion of the code refers to the side where the #1 cylinder is located.

This code occurs when the engine control module (ECM) sees the voltage of the O2 sensor for bank 1 sensor 2 below .21 volts when the ECM has commanded the fuel to a targeted rich condition on that bank of the engine. What causes the P0137 code? The ECM detects the low voltage problem and turns on the Check Engine Light.

The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. The oxygen sensor varies the voltage over a range from about 1,000 mV when the exhaust is rich, down through about 10 mV when the exhaust is lean. The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information.

What are the symptoms of the P0137 code? 1 The engine will run rich during the testing of the sensor for problems. 2 The Check Engine Light will be illuminated. 3 You may have exhaust leaks before or near the O2 sensor in question.

What does the Diagnostic Code p0113 stand for?

Diagnostic trouble code P0113 stands for “Intake Air Temperature (IAT) Sensor Circuit High Input.” If your OBD-II scanner reports this code, it means your car’s computer has determined that there’s a problem with the IAT sensor 1 or its circuit.

What is the p0137 code for oxugen sensor 2?

Code P0137 triggers when the PCM detects that the signal from oxugen sensor 2 on Bank 1 is below a specific value for a certain amount of time. The Bank 1 portion of the code refers to the side where the #1 cylinder is located. There are two O2 sensors in your vehicle.

When does p0137 trigger in a catalytic converter?

In contrast, downstream sensors (sensor 2) generate a fairly steady voltage when the catalytic converter is working properly. Code P0137 triggers when the PCM detects that the signal from sensor 2 on Bank 1 was below a specific value for a certain amount of time.

Code P0137 triggers when the PCM detects that the signal from oxugen sensor 2 on Bank 1 is below a specific value for a certain amount of time. The Bank 1 portion of the code refers to the side where the #1 cylinder is located. There are two O2 sensors in your vehicle.

Diagnostic trouble code P0113 stands for “Intake Air Temperature (IAT) Sensor Circuit High Input.” If your OBD-II scanner reports this code, it means your car’s computer has determined that there’s a problem with the IAT sensor 1 or its circuit.

In contrast, downstream sensors (sensor 2) generate a fairly steady voltage when the catalytic converter is working properly. Code P0137 triggers when the PCM detects that the signal from sensor 2 on Bank 1 was below a specific value for a certain amount of time.