Where is the obd port on a 95 dodge ram 1500?
Where is the obd port on a 95 dodge ram 1500?
you should have the old chrysler connector next to the fuse panel under the hood or near the computer. any garage with the snap on scanner exspecially the old red brick one will have this connector and yet it will only give you a code and maybe a little bit of data.
Can you change OBD1 to OBD2?
It is not the motor that decides if it is obd1 or 2 it is the ecu that decides, so it is possible. You would only convert the plugs on the dizzy, fuel injectors, and the alternator of the obd1 motor to work with an obd2 harness. You can also convert your car to run off an obd1 ecu with a jumper harness.
What was the pin out on a 1995 Dodge Ram?
PCM Pin Out Chart (1994 V8 Dodge Ram 1500, 2500 Pickup). PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup). Here are some very important safety precautions when testing the wires coming out of the 60 pin PCM connector.
Do you need a pin out chart for a Dodge Ram?
If one or any of the wires on your Dodge Ram pickup DO NOT match the color stated in the pin out charts, then you should not use the pin out charts in this article. Why? Because this is the clearest indication that these ARE NOT the connector pin out charts for your particular Ram pickup.
How many pins does the OBD1 connector have?
The connector is often black and has 12 pins on it; pretty easy to identify. The OBD1 connector has 12 pins, but not all are used on all cars. The standard pins like the ground, power and a diagnostic pin are the same from a lot of different car manufacturers.
What kind of engine does a 1995 Dodge Ram have?
IMPORTANT: The illustration above and pin-out table below apply only to: 1995 Dodge Ram 1500/2500 pickup equipped with a 5.2L V8 or 5.9L V8 engine. PCM Pin Out Chart (1994 V8 Dodge Ram 1500, 2500 Pickup). PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup).
PCM Pin Out Chart (1994 V8 Dodge Ram 1500, 2500 Pickup). PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup). Here are some very important safety precautions when testing the wires coming out of the 60 pin PCM connector.
If one or any of the wires on your Dodge Ram pickup DO NOT match the color stated in the pin out charts, then you should not use the pin out charts in this article. Why? Because this is the clearest indication that these ARE NOT the connector pin out charts for your particular Ram pickup.
IMPORTANT: The illustration above and pin-out table below apply only to: 1995 Dodge Ram 1500/2500 pickup equipped with a 5.2L V8 or 5.9L V8 engine. PCM Pin Out Chart (1994 V8 Dodge Ram 1500, 2500 Pickup). PCM Pin Out Chart (1996 5.2L, 5.9L Dodge Ram Pickup).
What is the location of the OBD port?
The OBD Port, is the location where you can plug in any OBD tool into the vehicle to pull vehicle information. It is also the primary location of tracking devices such as dongles as the port provides ongoing power to the device. There are two generations of OBD ports, OBD1 and OBD-ii aka OBD2.
