What does the fault code p1693 stand for?

OBD II fault code P1693 is a manufacturer specific code that is defined by car maker Dodge as “Turbo Charge Control Circuit Malfunction”, and is set (somewhat counter intuitively) when either, or sometimes both the ECU (Engine Control Unit) and the PCU (Powertrain Control Unit) detect(s) that additional codes are stored in…

Where can I find turbo charge code p1693?

Since code P1693 only serves to indicate the presence of other stored codes in either or both control modules, the stored codes must be extracted with a suitable scan tool or code reader.

What kind of engine light is p1693 DTC?

2000 Dodge Ram 2500 4WD. 142,000 miles. Started bogging out at around 3000rpm and intermittent. Check engine light P1693 dtc stored in companion module. took to Dodge dealer they replaced pcm and reprogrammed.

When to set fThis DTC code p1693?

ECM sets DTC P1693 if the ECM detects that the MIL control circuit is open or shorted ground or bettery.. ECM (Engine Control Module) uses torque reduction signal from TCM to reduce the shift shock by controlling ignition timing. If fThis DTC is set when the value is out of threshold value.

Since code P1693 only serves to indicate the presence of other stored codes in either or both control modules, the stored codes must be extracted with a suitable scan tool or code reader.

What are the possible causes of a p1693 Hyundai?

P1693 HYUNDAI Possible Causes 1 Faulty Ignition Key Transponder 2 Ignition Key Transponder no programmed 3 Faulty Engine Control Module (ECM)

What causes a p0216 injection pump failure code?

Prolonged fuel delivery problems can cause injection pump failure! Symptoms of a P0216 DTC may include: Displays an intermittent stumble or miss Engine may start and then stall Engine may appear to drive fine but surge at idle The most frequent cause of this code is a bad injection pump due to poor fuel delivery.

What are the symptoms of a p0216 DTC?

Symptoms of a P0216 DTC may include: Displays an intermittent stumble or miss Engine may start and then stall Engine may appear to drive fine but surge at idle The most frequent cause of this code is a bad injection pump due to poor fuel delivery. Fuel delivery problems could be: A plugged diesel fuel filter

What are the causes of the p0216 code?

What are the causes of the P0216 code? 1 A faulty camshaft position sensor 2 A faulty crankshaft position sensor 3 A faulty powertrain control module 4 Damaged wiring associated with the fuel injection control circuit.

Is the code p1693 related to turbochargers?

As such, it should be noted that code P1693 does NOT directly refer to turbochargers, and/or systems or components that are related to turbochargers or turbocharger boost control circuits/systems in any way, shape, or form.

When does the p1693 set in the PCM?

The P1693 sets in the pcm when there is a code in the ecm. We’ve got a code definitely hiding in the ecm that points to your problem. Cummins codes won’t come up on a key cycle code read like we did, but now at least we know for sure you have codes set.

What does p1763 mean on a Dodge Ram?

Error Code P1763 is defined as Governor Pressure Sensor Voltage Too High. This error code is a manufacturer-specific trouble code, meaning it does not apply to all vehicles makes. Rather, it applies only to specific vehicle makes, such as Dodge, Jeep, Ram, etc.

Why is my p1693 not working on my 24V?

Additionally, another common cause of P1693 on the 24v is the Accelerator Pedal Position Sensor (APPS) failure. This failure, which you can read about it our 5.9 common problems post is caused when the gas pedal sensor fails essentially rendering the pedal useless, which can create erratic and scary driving conditions.

What to do if p1693, p0122 code returns?

If the P1693, P0122 codes return, then you’ve got a connection problem. This can be common after replacing the APPS. Remove the connector from the APPS and inspect the pins and wiring for breaks or corrosion.

What is code p1693, p0122 for Cummins?

Shops are reporting code P1693, P0122 issues when replacing the accelerator pedal position sensors (APPS) on Dodge vehicles with the 5.9L engine. The APPS must be adjusted properly to achieve a reading of .59-.65 volts on the light blue wire with a black tracer.

How much does it cost to repair a p1693 Dodge?

The cost of diagnosing the P1693 DODGE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

What does p0234 mean on an OBDII scanner?

Went to Autozone and had them plug their OBDII scanner up. It was two P0234 codes: Overboost condition. Cleared them out, haven’t come back yet. Is there anything in particular that would cause overboost? Cold weather, engine not fully warmed up?

What’s the cause of the p1689 error code?

Mopar1973Man is back out in his shop and found the cause of P1689 error codes. P1689 – No Communication Between ECM and Injection Pump Module Data link circuit failure between ECM and fuel injection pump. Low power, engine derated, or engine stops.

What does p1693 mean on a Dodge Ram truck?

Still other manufacturers that include Ford, Citroen/Peugeot, and Mercedes also use code P1693 with the definition “Turbo Charge Control Circuit Malfunction”, and as with Dodge Ram trucks, the presence of code P1693 on these applications merely serves to indicate the presence of other codes that are stored in one or more control modules.

What does the companion code p1693 mean?

Thats not what that code is… P1693 is the companion code…it means that there may be another code stored and you need to use a OBDII scanner to extract it. If I was a betting man I bet it will be P0216….Injection Pump timing failure…

What does p1693 mean on a powertrain control module?

P1693 Meaning The Powertrain Control Module (PCM) is monitored for the Diagnostic Trouble Code (DTC) with the ignition on and engine off and with the engine running. DTC may set if a companion module DTC is present. The PCM is reporting it has a DTC present.

What to do when you get a p1693 code?

Check the “Possible Causes” listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector’s pins. Usually, the P1693 code is combined with another code (e.g. P0216). Check repair for other codes first. What does this mean?

Can a turbo charge control circuit code p1693 persist?

In these cases, code P1693 could persist until it is manually cleared with a suitable scan tool.

What does trouble code p1693 mean on a Jeep Cherokee?

SPECIAL NOTES: Several other manufacturers, including Chrysler, Jeep, and Plymouth also use code P1693 to indicate the presence of trouble codes stored by one or more control modules, but on these applications, code P1693 is defined as “A companion DTC was set in both the ECM and PCM”, which is altogether a more accurate definition.

What does the fault code p1693 stand for?