What to do if your Dodge Ram fuse blows?
What to do if your Dodge Ram fuse blows?
Check the wiring harness, many have reported to find it completely melted. If this is the case, re-check all the fuses in the fuse box. You will likely find one to be blown. If you replace the fuse, wait a few minutes, turn the ignition to ON and watch to see it that fuse will blow again.
Why are the parking lights not working on my Dodge Ram?
The interior light controller can blow the under hood fuses for the dash and the parking lights when the dimmer switch is turned on or off. This is more common when an alarm or aftermarket stereo is installed; however, it has been reported even with a stock radio.
Where are the fuses for running lights located?
Step 10 – If all running or tail lights are not working, a fuse is used to protect the lighting system from overload and short circuits, anytime more than one light bulb is out, the fuse is the first place to check, these fuses are located in the power distribution center (pdc). Learn More
Why are the rear lights not working on my car?
As the rear lights are not connected, they do not illuminate. A fuse is a band of metal alloy inside a plastic container It is designed to break in the event of a power surge. When the band melts the circuit breaks and protects the electrical system and the lights from damage. One is situated inside the cabin.
Check the wiring harness, many have reported to find it completely melted. If this is the case, re-check all the fuses in the fuse box. You will likely find one to be blown. If you replace the fuse, wait a few minutes, turn the ignition to ON and watch to see it that fuse will blow again.
The interior light controller can blow the under hood fuses for the dash and the parking lights when the dimmer switch is turned on or off. This is more common when an alarm or aftermarket stereo is installed; however, it has been reported even with a stock radio.
Where are the flasher relays on a Dodge Ram?
Refer to the inside sticker of the fuse box panel and locate the two flasher relays. Switch the relays, and check if the turn signal lights are flashing. If one or both of the relays fails to turn on the turn signal light, replace as needed. Figure 2. Flasher relay.
Where is the brake light switch on a Dodge Ram?
Dodge Ram turn signal lever. The brake light switch can wear out, which translates into no brake lights on your Dodge Ram. If the bulbs as well as the connections are good and the wires are properly grounded, replace the switch. You will find it under the brake pedal. Figure 4. Brake light switch.
