How do you replace wheel bearings on a Dodge Ram?

Below is a step-by-step guide on how to replace the wheel bearings in your Dodge Ram. If you aren’t familiar with this process, visit your dealership or repair shop. Start by using your lug nut wrench and partially loosening the wheel lug nuts. Then locate the appropriate jacking spot for your Dodge Ram, and lift it on level ground.

How do you replace the front wheel hub on a Dodge Ram?

Secure the truck with jack stands on level ground. In order to gain access to the rotor and eventually the hub and bearing assembly, you must first remove the brake caliper. First, locate the main caliper bolts located on the back of it, then use your 7mm hex socket and ratchet wrench to remove them.

When to replace tone wheel on Dodge Ram?

On models with all-wheel antilock system (ABS), check condition of tone wheel on hub/bearing. If teeth on wheel are damaged, hub/bearing assembly will have to be replaced (tone wheel is not serviced separately). Slide the hub/bearing onto the spindle.

Can a 2001 Dodge Ram 1500 2WD have ABS?

MY 2001 RAM 1500 2WD DOES NOT HAVE AN ABS SYSTEM. THE PARTS STORE SOLD ME A HUB/BEARING UNIT WITH THE ABS GEAR. THEY SAID THAT THEIR MANUAL DID NOT SHOW AN ALTERNATE W/O THE GEAR RING. THEY SAID THAT I COULD SIMPLY KNOCK THE GEAR RING OFF THE HUB. IS THAT TRUE? ALSO, WHAT SIZE IS THE HUB/BEARING NUT?

How much is a front wheel bearing from Advance Auto Parts?

Advance Auto Parts has 56 different Front Wheel Bearing for your vehicle, ready for shipping or in-store pick up. The best part is, our Dodge Ram 1500 Front Wheel Bearing products start from as little as $6.99. When it comes to your Dodge Ram 1500, you want parts and products from only trusted brands.

What kind of bearing do I need for my Trailblazer?

MOOG® hub assemblies are performance proven, quality tested and are available for a broad range of foreign and domestic vehicles. Their application-specific design enhancements provide longer life, smoother operation and optimum ABS performance. Innovative roll form design ensures consistent and optimal preload.

How long does it take to replace hub bearing on Dodge 2500?

– YouTube Replace a Dodge 2500 unit hub bearing in 20 Minutes! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

How do you remove a wheel from a Dodge Ram?

Remove the wheel by turning the lug nuts counterclockwise, then pulling the wheel from the hub. Place the wheel aside, away from the work area. Remove the caliper and pads by turning the twin rear mount bolts on the caliper body counterclockwise, then sliding the caliper from the rotor.

How do you change wheel bearings on a Dodge Ram?

Replace the wheel by sliding it onto the lug bolts and turning all of the lug nuts clockwise, in an alternating pattern. Remove the jack stand and lower the truck from the floor jack by turning the jack’s pressure screw counterclockwise slowly. Repeat this procedure on the opposite wheel. Change wheel bearings and rotors in pairs.

How to remove Ram 2500 3500 hub assembly?

How To Remove RAM 2500 3500 Hub Assembly – EASY SIMPLE TRICK! – YouTube How To Remove RAM 2500 3500 Hub Assembly – EASY SIMPLE TRICK! If playback doesn’t begin shortly, try restarting your device.

Where to get a new front wheel assembly for a Dodge Ram 2500?

Find replacement Front Wheel Bearing And Hub Assemblys for your Dodge Ram 2500 at Moog-Suspension-Parts.com. Moog-Suspension-Parts.com stocks several brands of so you can find the perfect Front Wheel Bearing And Hub Assemblys for your Dodge Ram 2500.

What is the GM front wheel bearing Assy number?

You can drive pretty far worn bearings without fear of the wheel departing the truck due to the captive design of the unit. This is a sealed bearing assy that includes the hub, lug bolts, bearings, axle spline, wheel speed sensor, and cable. GM has recently updated the part number to #15225770 or AC Delco #FW289.

How to remove a front wheel bearing Assy?

There are 2 loctited 21mm head bolts that hold the brake caliper frame to the axle support. THESE ARE TIGHT!!! Rotate the steering to get to them easier. Remove the bottom, then loosen the top one so you can remove it with your fingers. You will need to have something ready to support it when you remove the brake assy. Step 5:

How do you change the rotor on a Dodge Ram?

Turn the four mount bolts clockwise until they are tight. Replace the spindle nut and turn it clockwise. Replace the caliper and pads (new pads are recommended) by sliding the loaded caliper onto the rotor and turning the two mount bolts clockwise.

How long does it take to replace wheel bearings on Dodge Ram?

Dodge Ram trucks use wheel bearings inside rotor housing to allow the wheels to spin freely. These wheel bearings can fail because of a loss of lubricant or heat damage, and will require complete rotor replacement. The average backyard mechanic can replace the wheel bearings in a Dodge Ram in about three hours.

How do you replace a wheel on a Dodge Ram?

Where is the hub nut on a Dodge Ram?

Turn the spindle nut (hub nut) counterclockwise and remove it. The wheel bearings on most Ram models are sealed inside the rotor housing, and this housing must be removed. Behind the wheel lug bolt assembly, there are four 14mm bolts that can be turned counterclockwise.

What happens when you change rear wheel bearings?

Turn the vehicle sharply to the left and to the right. This will load the bearings and change the noise level. Where axle bearing damage is slight, the noise is usually not noticeable at speeds above 30 mph.

How do you remove a wheel bearing from a Dodge Ram?

Remove the caliper and pads by turning the twin rear mount bolts on the caliper body counterclockwise, then sliding the caliper from the rotor. Unplug the calipers with ABS from the wiring harness by pulling the adapter plug from the socket. A small screwdriver can release the catch on the plug.

Can you remove the front wheel hubs on a Dodge Ram?

A quick tip on how to painlessly remove the front wheel hubs on the Dodge Ram 4×4 heavy duty trucks with the solid front axles. This is especially useful if your truck lives in the salt belt. This step is necessary to remove the steering knuckle before replacing the balljoints or front axle u-joints.

How long does it take to replace hub bearing on Dodge 2500?

How to remove Rusted Wheel hub bearing assembly the easy way?

How to remove a rusted wheel hub bearing assembly the easy way. – YouTube How to remove a rusted wheel hub bearing assembly the easy way. If playback doesn’t begin shortly, try restarting your device.

How do you replace wheel bearings on a Dodge Ram?