How do I know what front axle I have?
How do I know what front axle I have?
Stamped Number on the Axle To figure out exactly what axle you have, you can look for the Dana stamped bill of materials number. This stamped number can usually be found on the righthand side or on the longer axletube on the same side of the tube as the differential cover, facing the rear of the truck.
How to identify which rear axle I have?
If you mean ratio, that will be in the build sheet, tag inside the glovebox (if it’s still there) or the tag on the differential cover under one of the bolts (if that’s still there). Here’s a link to dodges main website. Click on the “equipment listing” in the left hand side of the page.
Where are the axles on a Dodge Ram 1500?
The commonest types of axles are front, rear, and stub. Worth mentioning that getting deeper into axles will help you understand how to find axle ratio Dodge Ram 1500. It locates at the vehicle’s front, assisting the steering in absorbing the road shocks. They are of two types; dead and live.
Do you need to know what rear end is in a Dodge truck?
Differentials can come in a variety of shapes and configurations, and if you’re set on changing a differential or simply installing a new diff cover, you need to know what rear end is in your Dodge truck. Or accurately pinning down that Ford F150 rear end identification.
What are the numbers on a Dana axle Bom?
The Dana axle identification BOM’s are six digits long and begin with the number 60 or 61 followed by 1 or 2 digits, such as 605561-1. Later-model Dana axle identification charts may start off with the first three digits of 200 rather than 60 or 61, for example 200561-1.
What kind of axles does a Dodge 4×4 have?
Gas 3/4 tons came with both the 44 and the 60 with a 60 in the rear. CTD had 60 fronts and 70’s or 80’s in the rear. 1 tons came with both the 44 and 60 front and 60/70/80 rears. It all depends on how it was ordered. I have had two parts trucks for my RC. The 350 had a 44 non disco front and 60 rear and the 250 had 60’s F&R.
Do you need to identify the front axle?
To help you find the right part, we first need to properly identify the axle you have or need. Not all vehicles are set up the same, even though they may be the same make and model. All of these axles take different parts so we need to properly identify the axle you have to get the right part.
Is the front axle of a truck the same?
Not all vehicles are set up the same, even though they may be the same make and model. All of these axles take different parts so we need to properly identify the axle you have to get the right part.
How big is the front end of a Dodge truck?
Chrysler has a wide range of front and rear ends! We carry everything from the 7.25″ front and rear end parts, to the large 11.8″ rear end parts for Ram trucks. We make it easy to verify your exact rear end by providing specs and year, make, and model applications for each differential listed.
