Easy tips

What does it mean to big time?

What does it mean to big time? You can use big time to refer to the highest level of an activity or sport where you can achieve the greatest amount of success or importance. If you describe a person as big time, you mean they are successful and important. [informal] He took a long time to settle in to big-time football. singular noun. Is big time a slang? Informal. the highest or most important level in any profession or occupation: She's a talented violinist, but she's not ready for the big time. Slang. How do you use big time in...
Easy lifehacks

What happens when you lower the air conditioner temperature?

What happens when you lower the air conditioner temperature? Many people think the lower they set the temperature, the quicker the home will cool. But an air conditioning unit will cool at the same speed whether it is set on 23 degrees Celsius (74 degrees Fahrenheit) or 18 degrees Celsius (65 degrees Fahrenheit). What should I do if my air conditioner is too hot? The ambient temperature of the room you’re trying to cool may be too high. You need to ensure that hot air isn’t coming in to the room through other ways. Keep the doors of the room...
Easy tips

What does a new brake rotor do for a F350?

What does a new brake rotor do for a F350? A new F350 brake rotor also does a stellar job of venting hot gas away from your engine, letting it cool more effectively and operate at the best of its ability. How do you remove the brakes from a Ford? Lift the Ford with a floor jack and place the front frame rail on one or more jack stands; the brakes can be removed one at a time, or both at the same time with the front end lifted securely. Remove the wheel and tire by turning the lug nuts...
Other

Where is the high-pressure power steering hose?

Where is the high-pressure power steering hose? Often they are located with the power steering pump, but sometimes they are located elsewhere in the engine bay. Refer to your owner's manual if in doubt. Locate the pressure hose connected to the steering fluid reservoir. What does the power steering pressure hose do? The power steering pressure hose carries high pressure power steering fluid between the steering pump and the power steering rack. The power steering pump directs fluid from the reservoir into the steering gear, helping to apply the right amount of pressure to turn the wheels smoothly and consistently...
Most popular

Are there any problems with the VGT turbo?

Are there any problems with the VGT turbo? It has the ability to help meet stringent emissions standards and the capability of doubling as an exhaust brake, but they have several key weaknesses. Stuck vanes are one of the biggest problems experienced with VGT turbochargers. Why do you need a VGT in a diesel engine? In general, diesel engine VGTs help deliver more power to the engine by increasing torque and creating the optimum geometry for an engine’s current speed. Especially at low speeds, VGTs can impel EGR flow and greatly reduce turbo lag. Optimum geometry also fosters increased efficiency....
Most popular

What does the fuel pressure sensor on a F150 do?

What does the fuel pressure sensor on a F150 do? The fuel pressure sensor is responsible for telling your F150’s ECM/PCM what the actual fuel pressure of the vehicle is. If it goes bad (or if the fuel pressure really is out of the normal range) P0191 can and will appear. What is the Check Engine Light code on a gas tank pressure sensor? This fuel tank pressure sensor article covers a boatload of General Motors cars and trucks. These automobiles will set a check engine light code in the P0440 range. However, when the sensor itself causes a problem,...
Easy tips

Can you replace the brake on a 1994 Ford Ranger?

Can you replace the brake on a 1994 Ford Ranger? 1994 Ford Ranger Brake Replacement DIY, this is a very simple job, however there are a few things to keep in mind. The older ford models don't have bolts holding in the brake caliper, instead they have clips that you have to hammer in and out. When opening the brake reservoir take a look at what the fluid looks like, mine was brown. What's the best way to replace a drum brake? Remove the spring and immediately hook it onto the new shoes exactly as you removed it. Inspect the...
Other

What are the compression results of a 4.2L Ford pick up?

What are the compression results of a 4.2L Ford pick up? To make better sense of the above calculation, let's say that my 4.2L Ford Pick Up produced the following compression test results: Cylinder #1 170 PSI. Cylinder #2 165 PSI. Cylinder #3 160 PSI. Cylinder #4 120 PSI. Cylinder #5 165 PSI. Cylinder #6 160 PSI. The next step is to do the math: 175 x 0.15= 26, 175-26= 149. How to do a 4.2L V6 engine compression test? TIP 2: Take all necessary safety precautions as you work around a cranking engine. Your safety is your responsibility, so...
Easy tips

What was the horsepower of a 1983 Ford Mustang?

What was the horsepower of a 1983 Ford Mustang? The Mustang was losing image after 15 years on the market, in spite of a new body and a superior TRX handling package. The 302 arrived just in time. It was good for 157hp and was marketed as the 5.0L V8 engine. That was 1982 and for 1983 things improved even further. What kind of engine does a Ford Mustang have? The most exciting part about this packages was that Ford had introduced a high-performance 5-liter (302 cid) HO engine package. The 302 V8 was taken out of the Mustang lineup...
Other

What was the error code for the movie Stranded?

What was the error code for the movie Stranded? (Error Code: 102630) David Robinson is being shipped off to a penal colony. His wife and kids are allowed to accompany him. A storm strikes the ship and the family (save for one son, Jacob) are trapped below ... Is the Ford 7.3L PowerStroke still on the road? And Ford’s 7.3L powerstroke diesel was equipped with two overhead valves for each cylinder. These and other factors made the engine awesome for its time! And over twenty years later there are still reportedly over two million 7.3 Powerstrokes still on the road...