Most popular

What happens if the retaining screw is too long?

What happens if the retaining screw is too long? The retaining screw you have sent is too long/too short. Use your existing screw if you can as this will be the correct length. If the existing screw is damaged then ensure the screw is no longer than the one you are taking out (screw can be cut down). Longer screws can cause damage to the lock case. Can I get extra keys? Can a screw be taken out of a Euro cylinder? As long as you have the right screwdriver and the key to the door anybody can take out...
Easy lifehacks

How to replace a faulty transmission speed sensor?

How to replace a faulty transmission speed sensor? Follow these procedures for replacing a faulty vehicle speed sensor (VSS). The same removal and installation instructions apply for both the input and output speed sensor. CAUTION: When replacing the new speed sensor be sure the O-ring on the new sensor is correctly fitted on the sensor before installation. Which is the first sensor on the transmission shaft? The first is known as the input shaft speed (ISS) sensor. As described, this sensor is used to monitor the speed of the transmission’s input shaft. How to replace transmission input sensor in Mitsubishi?...
Common questions

Do the seats of a Silverado from the year 1999-2007?

Do the seats of a Silverado from the year 1999-2007? Years ago, I personally installed really nice multi- contour seats with very similar cloth to the Suburban, from a 1992 Pontiac Bonneville SSE into a 1994 Suburban without any modification, with the exception of 1.5 risers I installed on the base to raise up the entire seat to my liking, but that was a personal preference. What kind of seat does a 94-98 Chevy have? Used 94-98 Chevy/GMC CK Truck Gray Cloth 60/40 RH Passenger Bucket Seat. This is an old takeout sitting around since the late 90's in great...
Easy tips

Can a trailblazer 5.3 work on a 03 suburban?

Can a trailblazer 5.3 work on a 03 suburban? You'll need to rewire the harness to work with the 03-04 TrailBlazer 5.3 PCM programming. Reflash the PCM with the TrailBlazer programming, your VIN, and get it running. You will need to figure out a way to hook up the Burb engine harness to your TB's underhood fuse box. The 03 Suburban is a Gen III LSx, 24x crank 1x cam reluctor setup. Are there any problems with the 2007 Chevrolet TrailBlazer? 2007 Chevrolet TrailBlazer LS We had a major problem with the headlights not working. At night we would be...
Most popular

What kind of lighting does a corvette have?

What kind of lighting does a corvette have? LED Lighting Interior & Exterior LED lights. Headlights, Emblems, Side Cove, Footwell, Trunk lighting & more. Lenses Taillight Lens, Head Light Lens, Headlight Covers, Lens Housing, Lens Grommet, Parking Light Bezels. License Plate Lights LED Lighting, License Plate Light Assembly, Light Bulbs, Light Housing, Lens Gasket, Lens Screws. When did the fog light bulb come out on a corvette? The earlier 1984-1990 design used a unique connection plug for the fog light bulb and is one of the points that need modified in a headlight wiring harness if converting an 84-90 front...
Easy lifehacks

What engines are available in the 2020 Blazer?

What engines are available in the 2020 Blazer? The 2020 Blazer will offer a turbocharged 2.0-liter inline-four with 230 horsepower and 258 lb-ft of torque, Chevy has confirmed to C/D. This slots in nicely between the current base engine, a naturally aspirated 2.5-liter inline-four with 193 hp, and the upgrade engine, a 3.6-liter V-6 with 308 hp. Where can I get a new Chevy Blazer engine? 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only If you depend on your Chevy Blazer to handle your everyday commute, a faulty engine is definitely something you don't want to mess around...
Other

What should I know about my Robinair 34288?

What should I know about my Robinair 34288? I have a robinair 34288 and it will not recover...pressures are around 90...trying to clear hoses...compressor engages - Answered by a verified Auto Mechanic We use cookies to give you the best possible experience on our website. What should I do about my Robinair 34700z? You'll want to check the inline filter as well as the condition of the pump oil. This is a common problem of Robinair 34700Z / 347002K & 347112K series machine. So don't worry just do the following, with POWER SWITCH OFF: - 1# Open front panel cover...
Most popular

What does a pinched feel like?

What does a pinched feel like? Sharp, aching or burning pain, which may radiate outward. Tingling, pins and needles sensations (paresthesia) Muscle weakness in the affected area. Frequent feeling that a foot or hand has "fallen asleep" Is a pinched nerve serious? A pinched nerve can become serious, causing chronic pain, or even lead to permanent nerve damage. Fluid and swelling can do irreversible damage to the nerves, so be sure to contact your provider if your symptoms worsen or don't improve after several days. Will a pinched nerve heal itself? Treating a Pinched Nerve Mild cases of a pinched...
Common questions

What kind of truck is a 1998 Chevy Silverado?

What kind of truck is a 1998 Chevy Silverado? 1998 chevy silverado 1500 4x4 ext cab this is a 350 vortec with lots of power runs great. Tires are in good shape and everything works. I just don't need it. 1998 Chevy, Silverado truck, 4x4 Z71, Astro Start, Extended cab with 3rd door, maroon cloth split bench seat in front, bench in back, short box, receiver hitch... Is the 1998 Chevy Silverado Z71 in fair condition? Truck started as project but never completed. paint in fair condition all parts are with truck including NEW GM 383 crate motor. What are...
Other

What causes a PT Cruiser to misfire at idle?

What causes a PT Cruiser to misfire at idle? If a coil pack goes bad, it’ll cause a misfire and rough idle condition. Really, your PT Cruiser will be running rougher at any RPM, but a misfire will be most pronounced at idle. Why does my Chrysler PT Cruiser shake when idling? Here are the main components of the ignition system, as well as what would cause them to make your PT Cruiser shake when idling. Fouled plugs can cause a misfire, which in turn causes an idle shake. Spark Plugs – One of the absolute most common causes (if...