Most popular

When to add refrigerant to an evacuation system?

When to add refrigerant to an evacuation system? Now that you have achieved vacuum Zen, the [&refrigerant&] charge must be added. Add [&refrigerant&] slowly until the system [&pressure&] is reading a slight positive. It is very important to know the positive [&pressure&] your [&micron&] [&gauge&] is able to withstand so it [&does&] not get damaged during this process. What happens to the micron gauge after an evacuation? Once the target vacuum has been achieved, isolate the system from the pump and observe the micron gauge reading. A common term for this procedure is called a “decay test”. If the system...
Easy tips

What to do if your truck feels like it is going over rumble strips?

What to do if your truck feels like it is going over rumble strips? It could actually go a month - or years. If you have a switch for turning off the overdrive (something like an O/D Off button) then turn it off. This will likely shut down the TCC altogether. If you do any long drives, esp highway-type driving don’t leave it off, but for normal everyday around home driving it will be fine. What to do when Your Truck turns over but won't start? Check your fuel tank When your truck turns over but won’t start, the first...
Easy tips

What kind of starter does a Ford 1100 have?

What kind of starter does a Ford 1100 have? Starter, New - 12 volt, clockwise rotation, 10 teeth. For tractor models 1100 with perkins diesel, 1116, 1495 with perkins diesel, 1496. (Part No: 795152) Starter, New - This Hitachi type starter has 9 teeth, is 12 volts with a counter-clockwise rotation. What are the parts for a Ford 1100 tractor? For tractor models 1100 with perkins diesel, 1116, 1495 with perkins diesel, 1496. (Part No: 795152) Starter, New - This Hitachi type starter has 9 teeth, is 12 volts with a counter-clockwise rotation. Crosses to part numbers SBA185086321 SW07201, 18508-6321....
Easy tips

What do you need to know about Komatsu hydraulics?

What do you need to know about Komatsu hydraulics? Komatsu hydraulic components are built to the highest tolerances, which is why it’s critical that you use genuine Komatsu parts, consumables and lubricants. That way, you can be sure of long, reliable and productive life from your Komatsu equipment. Where is the oil return valve in Komatsu? From the hydraulic system (system diagram) (yuán lǐ) diagram can be seen, hydraulic system oil filter (Filter) check valve and hydraulic oil (Hydraulic) radiator (reducing the heat generated when the equipment is running) and connected to the oil return At the outlet of the...
Other

What to do about a Mitsubishi Fuso engine leak?

What to do about a Mitsubishi Fuso engine leak? It is best to use a product that functions as a liquid conditioner for the seal and gasket. When the oil stop leak is mixed with the engine oil, it will help bring the seals and gaskets back to their good condition. When you look for a Mitsubishi Fuso for sale, make sure that the shock absorbers of the truck are in good condition. Are there any problems with the Mitsubishi Fuso Fighter? Some Fuso Fighter drivers also complained that at about 30,000 miles, the front shock absorbers of their truck...
Common questions

How do I unlock park brake?

How do I unlock park brake? TYPES OF PARKING BRAKES Press down on the pedal until you hear it click to engage it. Pull the lever above the foot pedal to release the brake. Center lever – Popular on late-model vehicles with bucket seats, this type of parking brake is found between the seats. Simply pull up the lever to engage the emergency brake. What happens when the parking brake is not energized? The solenoid will NOT be energized when there is an open circuit or a short to ground. If the parking brake solenoid is shorted to the +battery...
Common questions

How does the JCB fuel injection system work?

How does the JCB fuel injection system work? To warm up the JCB fine filter, heaters of a shroud (overhead) type are used. The JCB injection system is designed to form a fuel-air mixture by fuel injection. The fuel system works as follows. When the ignition is switched on, the fuel pump pumps the fuel into the system. When passing through the fuel filter, it is cleaned. Why is the JCB high purity fuel filter broken? With a certain periodicity, the fuel filter assembly or, just, the JCB filter element is replaced. The JCB high purity fuel filter is the...
Easy tips

What kind of engine does a Ford F650 have?

What kind of engine does a Ford F650 have? 2006 Ford F-650 call for price Year: 2006 Make: Ford Model: F-650 Color: Yellow SN: 6V228800 Mileage: 190,339KM Engine Year: 2006 Engine Make: Cummins Engine Model: ISB 260 Engine Type: 260HP Engine SN: 46488648 21′ Tilt n Load Deck Notes: Engine no Good Is the Ford F650 Super Duty dump truck for sale? 2004 Ford F650 Super Duty Dump Truck. 75,711 Miles, Automatic Transmission. Clean Truck, Ready to Go, Fully Serviced, rear pintle hitch, Very good rubber. Your registration is being reviewed by American Auctioneers. If you have any questions please...
Easy lifehacks

Which is a good support level for Raymond Stock?

Which is a good support level for Raymond Stock? RAYMOND above 683 is good positional bet for 800+ targets (16-18%). It has major support around 630 region which is respected since 2006. Once resistance at 683 region is breached, it can sail through till 800+ region which will be another long term resistance trend line. What is the price of Raymond Stock NSE? #RAYMOND NSE: RAYMOND CMP 385.65 Target1: 476 Target2: 583 SL: 359 TimeFrame: <5-6 months Can hold for a longer term. Price from now might double. Factors: Rising Volume with rising Prices. Flag pattern breakout. When is the...
Common questions

Why does my John Deere 550 stop working?

Why does my John Deere 550 stop working? I have a older John Deere 550 dozer that the transmission has stopped working correctly and the left steering just went out. When it is cold it pulls fair but once it warms up it doesnt pull strong even thought the motor is strong. of course now it only goes in circles. Why is my John Deere crawler not moving? Sometimes the center of the clutch disk strips out. It has springs to take up the torsional dampening when you use the reverser, and after lots of shifts it all falls apart....