Why does my John Deere 550 stop working?

I have a older John Deere 550 dozer that the transmission has stopped working correctly and the left steering just went out. When it is cold it pulls fair but once it warms up it doesnt pull strong even thought the motor is strong. of course now it only goes in circles.

Why is my John Deere crawler not moving?

Sometimes the center of the clutch disk strips out. It has springs to take up the torsional dampening when you use the reverser, and after lots of shifts it all falls apart. because of all the engine noise most of the time you do not hear anything.

Why does my JD 550 transmission overheat?

1. bought it used, the motor is new rebuilt a year ago. 2. transmition had some water in it because the oil was whiteish grey. 4. the transmition overheats but the motor is ok.

Can a John Deere crawler Dozer move forward?

Heavy Equipment Repair This answer was rated: 1985 john deere 450e crawler dozer IT WILL NOT MOVE FORWARD OR reverse… I have a 1985 John… I have a 1985 John Deere 450E CRAWLER DOZER IT WILL NOT MOVE FORWARD OR REVERSE Show More Show Less Ask Your Own Heavy Equipment Question Share this conversation Answered in 10 hours by: .

Is the John Deere 550 a good car?

Those old 550 John Deeres are a great dozer I had one with 16000 hours on it and should have never sold it .I have owned 12, 550 s of every series A,B,G,H,and J since that and if I owned that 550 unit I would fix it to like new they are my favorite by far . Digitup,

What to do if your JD 550 has transmission problems?

Find some one that is good at diesel repairs and get them to help.These are not rocket science nor should they be junked We will help you through it even .

Why does my JD 550 go in circles?

When it is cold it pulls fair but once it warms up it doesnt pull strong even thought the motor is strong. of course now it only goes in circles. Without even looking at it the dealer told me it was not worth fixing and if he fixed it he would not guarentee it.

Where can I buy John Deere 550 parts?

You’ve come to the right place. We sell a wide range of new aftermarket, used and rebuilt 550 replacement parts to get your machine back up and running quickly. Give us a call, submit an online quote request or select a category below to browse/select a part.

Find some one that is good at diesel repairs and get them to help.These are not rocket science nor should they be junked We will help you through it even .

What causes a Deere power steering to fail?

Let me start by saying that dealer is wrong. Air in your suction side or low pressure side will cause premature pump failure. The lubrication that the hydraulic oil provides the pump is critical.With that being said we will address some of the other symptoms. Deere has what they call the priority circuit.

What is part number for John Deere power steering?

The one that the John Deere dealer put on was a John Deere part number RE45864. The two filters appear to be identical. 3) The pump does not make any substantial noise when it is having this problem. The dealer told me that getting air into the suction of the pump would not damage the pump.

Is there a problem with my JD 550?

Digitup. I have a similar problem. My 555 runs great and pushes great until it warms up and works hard. It then loses pushing power and progresses to no movement at all. After it idles or sits for several minutes, it will run again. Is the process for addressing my problem also top down?

What is the Technical Manual for a John Deere bulldozer?

John Deere 350C, 350D Crawler Bulldozer & 350C, 355D Crawler Loader Technical Manual (TM1115) John Deere JD540-B Skidder & Grapple Skidder Operation and Tests Service Technical Manual (TM1139) John Deere JD540-B Skidder & Grapple Skidder Repair Technical Manual (TM1139)

1. bought it used, the motor is new rebuilt a year ago. 2. transmition had some water in it because the oil was whiteish grey. 4. the transmition overheats but the motor is ok.

Why does my crawler not engage drive straight away?

Q: When cold, why does my transmission not engage drive straight away? A:Often this is due to a lack of pressure due to the transmission pump sucking air – cavitating. Low oil level? Check hose clamps on all suction lines If any oil leaks are present, while machine is parked – these are usually leaks on the suction side of system & need repair.

What’s the problem with my Dozer crawler loader?

After fixing it back, I put a inline pressure gage on the filter assembly and then within 10 to 15 minutes it blew the “O” ring out of the filter and the pressure raised over 500psi. Is there anyway you can help and tell me what you think the problem may be?

Why is my 5525 power reverser not working?

I’m having a problem with the 5525 tractor recognizing it is in gear. I have used this tractor for a few hundred hours so it’s not new to me.

What causes high pressure on a crawler loader?

I would first look at the relief valves located under the torque convertor housing. It is possible the one or more of the valves is sticking, causing the high pressure. The plungers/valve pistons should move freely in their bores. Thank you so much for the advise and I will check that out an then let you know what I find.

Why does my John Deere 550 stop working?