Easy lifehacks

What happens if you set code on downstream O2 sensor?

What happens if you set code on downstream O2 sensor? With this code set you will be running in open loop regardless of the reason the code is set. Constant open loop operation can’t be good for the cat. If this code only applies to the downstream O2 sensor then it will not affect the open/closed loop operation of the engine. The downstream O2 sensor controls the heat of the catalytic converter. Is the O2 sensor on my Subaru not working? OK, the heating circuit has failed on my downstream O2 sensor (CEL code P0141). As I understand it, this...
Common questions

What does the p0700 code mean on a Dodge Caravan?

What does the p0700 code mean on a Dodge Caravan? It is possible to get the P0700 code without any other code registering with your Dodge Caravan. If you get no other code it means that the transmission control circuit is malfunctioning. It is typically accompanied by other codes that’ll help shed light on the situation. When P0700 registers by itself can be tricky. Where is the p0700 Transmission Control Module located? A P0700 code stored in the powertrain control module (PCM) indicates that there is a code stored in the transmission control module (TCM) that can be accessed by...
Easy lifehacks

Is a 2008 PT Cruiser an interference engine?

Is a 2008 PT Cruiser an interference engine? It has a 2.4 liter, dual-overhead cam engine and is available in a turbocharged version. The PT Cruiser's engine is a non-interference type. This means that if the timing belt breaks or slips, the valves will not hit the pistons. Some of the most common problems with the PT Cruiser involve the vehicle's engine. Does a 2008 PT Cruiser have a timing belt? There were no serious issues reported with the timing belt for the 2008 PT Cruiser, and although the model year had a few problems, overall, it was not that...
Common questions

What should I do if my transmission is not working?

What should I do if my transmission is not working? To save money and do it yourself you can manually retrain the transmission. The next option is to take it to the dealer and pay them to do it. It's your choice. Disconnect the battery to clear the computer memory, leave the battery disconnected for 10 minutes and reconnect. Are there any transmission problems in a trasnmssion? Every trasnmssion has its own type of problem. Also, if you were in the area of 100,000 miles on your transmission, you better hope that $1700 got you new planet kit, 2/4 hub...
Easy tips

Why is the thermostat on my Chrysler 300 overheating?

Why is the thermostat on my Chrysler 300 overheating? If the hotter air from the condensor and radiator combined are hot enough they might get the coolant warm enough to open the incorrect thermostat, that makes some sense. Where did you get the thermostat? What happens when you turn off the airconditioning on a Chrysler 300? The engine temperature immediately begins to drop and then settles in at just below the half-way mark. This tells me the system is clean and that the coolant is flowing nicely. BUT, as soon as I turn "OFF" the airconditioning, the lower radiator hose...
Most popular

How many o2 sensors does a 2002 PT Cruiser have?

How many o2 sensors does a 2002 PT Cruiser have? Oxygen sensors are located before and after the catalytic converter. A vehicle may have two to five oxygen sensors, and sometimes even more. How much is the PT Cruiser engine control module? 10% OFF $75. Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Just because your vehicle has a retro style appeal, doesn't mean that it's not equipped with some of the latest technology to improve its fuel economy and performance. Keep up your vehicle's performance with a new Chrysler PT Cruiser engine control module from AutoZone. Are there any problems...
Common questions

Can a Dodge Caravan run at 1 3?

Can a Dodge Caravan run at 1 3? Dodge Caravan Questions - Running rough, hesitates, stumbles, runs great at 1/3 throttle. - CarGurus Running rough, hesitates, stumbles, runs great at 1/3 throttle. What causes a Dodge Caravan to run rough? Van was running great then while driving down the road it was as if someone flipped a switch. It started missing, hesitating and just running rough. It ran okay (not great) when the throttle was pressed about 1/3 the way down. What should I do if my Dodge Caravan misfire? Do not disconnect the battery, any misfire will code on...
Common questions

What kind of engine does the Chrysler 300 SRT have?

What kind of engine does the Chrysler 300 SRT have? Power comes from the 6.4-liter Hemi V8 that Chrysler is finding homes for in several 2012 SRT cars. The Hemi produces 470 horsepower and 470lb-ft of torque, but just as it is with the other SRT cars which use this engine, the transmission is the car's most disappointing feature. How much does a 2012 Chrysler 300 SRT8 cost? However, coming in at $15,000 cheaper and with far more equipment as standard, the SRT8 makes a strong enough case for itself that those extra couple tenths of a second it takes...
Other

Where does the airbag light go on a minivan?

Where does the airbag light go on a minivan? Two pins of the plug go to belt buckle from the seat belt and two pins go to the belt tensioner. When a cable is disconnected or has a high resistance, then the airbag lamp turns on. I have cleaned the contacts. The airbag lamp went out by itself. The error did not come back after that. Do you clear trouble codes before resetting airbag light? Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can...
Easy lifehacks

Where is the brake light fuse on a 2007 Dodge Caliber?

Where is the brake light fuse on a 2007 Dodge Caliber? This could be a fuse, the third brake sometimes is fused sperate than the others or the most common is the wire is broken at the brake light switch, this switch is located on the top of brake pedal on a bracket, if you follow the pedal up to top you will see the switch, hope this helps. What to do if your brake light does not work? If the turn signal switch is not working properly, your brake light can also not work. Find the wire that connects...