Most popular

What kind of car was the 1966 Chevy Impala?

What kind of car was the 1966 Chevy Impala? 1966 Chevrolet Impala SS Convertible In celebration of their 50th year of production, Chevrolet introduced the Impala. Designs were changing, moving away from traditional tail fins being replaced b... More Info › When did the Chevy Impala SS 427 come out? Both the 396 and its 427-cube Mk IV running mate were available for the 1966 Impala SS. A specially packaged SS 427 Impala debuted in 1967 and carried on alone after the base Super Sport was discontinued in 1968. Chevy offered its last full-sized SS 427 in 1969. What kind...
Common questions

What was the year of the Edelbrock 351W?

What was the year of the Edelbrock 351W? To illustrate the effectiveness of the kit, we first secured a 1992 5.8L 351W from a local LKQ Pick-a-Part. We were smart enough to shop for our motor on a sale weekend when every part in the yard (including a complete engine) was 40% off. Where did the Ford 351W engine get its name? Not to be confused with Ford's 351 "Cleveland" engine, the 351W gets its name from Ford's Windsor, Canada, plant, where it was briefly manufactured. How many horsepower does a Ford Edelbrock have? Obviously Ford was more concerned about...
Common questions

What kind of gas tank does a 1935 Ford have?

What kind of gas tank does a 1935 Ford have? Tank's, Inc. offers gas tanks for your 1935-1940 Ford for Coupes, Sedans, Convertibles and Pickup Trucks and are available in Poly, Alloy Coated Steel and Stainless Steel. Tank's, Inc. also sells In-Tank fuel pumps for your special project. What should the pressure be on a fuel pump? The fuel pressure was about 5-6 psi so we knew the pump was getting power, just not producing the correct amount of pressure to allow the engine to run. Loading... Why does my fuel pump run hot when I shut off the engine?...
Common questions

How can I make my axle stronger?

How can I make my axle stronger? Greater strength can come in the way of a complete bolt-in axle replacement. It can also be had through reinforcement using trusses or by swapping in sturdier 'shafts. Better 'shafts can also create a more reliable axle—one that can take more stress and power without becoming a shattered collection of metal bits. Is a Dana 44 a good axle? At the same time, the Dana 44 is a great axle if you don't need giant tires or big power. Most people don't realize how heavy a Dana 60 is and how much unsprung...
Easy lifehacks

What year did Chevy 327 come out?

What year did Chevy 327 come out? The original Chevy 327 was introduced in 1962 with Chevrolet's new and larger 4.00-inch bore and 3.25-inch stroke size. What was the size of the Chevrolet small block engine? The 265 cu in (4.3 L) V8 engine was bored out to 3 7⁄ 8 in (98.4 mm) in 1957, giving it a 283 cu in (4.6 L) displacement. The first 283 motors used the stock 265 blocks. However, the overbore to these blocks resulted in thin cylinder walls. Future 283 blocks were recast to accept the 3.875 bore. Is the Chevy 327 engine...
Other

What kind of engine does a 1964 Chrysler Newport have?

What kind of engine does a 1964 Chrysler Newport have? Powering this Newport is a 361 CI, V8 “B” block engine that develops 265 gross HP. The underhood view is tidy though a bit worn but it looks about as one would expect. What kind of body did the Chrysler Newport have? The 1962 model year Chryslers continued to use the 1961 body, but were shorn of their tailfins . The Newport was restyled alongside the New Yorker and Chrysler 300 for 1963, with this body style continuing for 1964. The 1963 model year was a major restyle without any...
Other

How do you install a shift kit on a Ford?

How do you install a shift kit on a Ford? Once you have the right combination of 2-3 shift accumulator springs and washer/spacer in the bore, install the cover and verify the proper seating of the C-clip. Discard the factory’s thimble-shaped filter and install one of two provided tapered orifices included in the kit. What kind of shift kit does a Ford C4 use? Their first effort was known as the B&M Hydro Stick 4-speed automatic. B&M’s vast experience with automatic transmissions includes the Ford C4 Transpak kit (PN 50227), which is for 1964–1966 C4 Dual- Range Green Dot transmissions,...
Easy lifehacks

How do you replace the cab mount on a Ford PowerStroke?

How do you replace the cab mount on a Ford PowerStroke? It may also be necessary to use a screwdriver or pry bar to bend the locking tabs further out of the way to facilitate getting the wrench on the nut. Once you are able to hold back-up you can zip it right out with an impact unless the threads are galled from the factory as they were on my front drivers side and then good luck, start cutting. Where is the ham radio in a Ford F250? Discussion in ' 2017 - 2022 Ford F250+ Super Duty Forum '...
Other

What kind of power steering rack does a Mustang II use?

What kind of power steering rack does a Mustang II use? Part #: Includes (2) 91034341 rubber bushings. This power steering rack & pinion unit fits aftermarket Mustang II crossmembers. This power rack is modeled after the 1982-88 T-bird design with 9/16"-18 and 5/8"-18 O-ring port threads (includes male -6 AN adapter fittings). Uses a 3/4"-36 spline U-joint. Is the T Bird power steering rack remanufactured? Our T-Bird rack is not a remanufactured unit. It is built from an all-new casting and fitted with all new internals. That includes the rack gear, pinion shaft, internal seals, inner tie rods, and...
Easy tips

How do you let oil drain?

How do you let oil drain? The oil will warm up to about 100 degrees, which is not hot enough to burn you, but warm enough that it will flow easily. If the vehicle has been driven, let it sit for 20-30 minutes before draining the oil. Can I let my oil drain overnight? It is not recommended that you let the oil drain for extended periods of time. Let it drain till it comes to a slow drip and then screw in the drain plug. Letting it drain for an extended period of time can cause the oil pump...