Will go into4 high but not4 low?
Will go into4 high but not4 low?
If the motor rotates and is working, then the issue lies within the transfer case. If the motor only turns a little and mostly turns on 4 HI, then I recommend replacing the shifter module motor to the transfer case. Also, the transfer case lock switch may also cause the transfer case to not engage into 4 HI as well.
Why is my 4WD not working on my Ford Ranger?
Poor ground problems causes the alternator to work harder at supplying current to the 4WD control module – consequently, destroyng the 4X4 ECM. In many cases, Ford owners will declare that a defective battery is causing the problem, this is certainly possible however in most cases this is not the source of the problem.
What are the 4 wheel drive indicators on a Ford Ranger?
98 ford ranger 6 cyl 5 spd 120,000 mi. The yellow 4wd indicator lights on dash come on when I start the veh and then turn off like the rest of the start-up lights.
What kind of engine does a Ranger 4×4 have?
I have a 1998 ford ranger 4×4 with a 3.0 liter engine. Today I was driving it home when I noticed the four high and four low indicator lights on the dashboard will blink a few times and then stop for two minutes and then start up again. I tried to put it in four wheel drive but it wont go into either one.
How can I Shift my Ford Ranger to 4×4 high?
Determine if the 4X4 system can be shifted to 4X4 high by pressing the 4X4 button. The dash and 4X4 buttons should light up. If they do not, one of the following is faulty: the dash button, the 4X4 module or the shift motor. To determine which of these three is malfunctioning, have your friend sit near the module.
Are there any problems with the Ford Ranger 4×4?
Problems with Ford Rangers can arise with either the low or high 4X4 system or the automatic or manual hubs. If you are having problems with your 4X4, follow these steps to diagnose the trouble.
98 ford ranger 6 cyl 5 spd 120,000 mi. The yellow 4wd indicator lights on dash come on when I start the veh and then turn off like the rest of the start-up lights.
Determine if the 4X4 system can be shifted to 4X4 high by pressing the 4X4 button. The dash and 4X4 buttons should light up. If they do not, one of the following is faulty: the dash button, the 4X4 module or the shift motor. To determine which of these three is malfunctioning, have your friend sit near the module.
Why does my 4 wheel drive not engage?
It is the electric motor on the transfer case that engages the 4wd. When this happens, check to see if there is power to the actuator. IF there is, chances are it is bad. Let me know what you find. helpful? 98 ford ranger 6 cyl 5 spd 120,000 mi.
