Other

Why does my Chevy Silverado make a noise when I stop?

Why does my Chevy Silverado make a noise when I stop?

A steady whine from the front that is best heard while stopped or during low speed turns. With the steering wheel straight, the whine may be null or low, but the noise increases noticeably when the steering wheel is turned. This is often caused by low power steering fluid, which indicates a leak that must be corrected.

What causes a rattling sound in my front wheel?

The most common cause of rattling noises from the wheel area being loose or a worn strut mount or the strut coming apart. This rarely is a cause for alarm but of course can be very annoying.

Where does the lifter sound come from on a Chevy Silverado?

You can hear lifter click best around the top of the engine, and isolate the noise with a stethoscope against the valve cover. It will occur at idle and increases as you rev the engine, continuing even when the engine is warm. Valve lifter noise is detrimental and should be addressed quickly.

Is it bad to hear piston slap in Chevy Silverado?

In TSB 01-06-01-022 (Aug 22, 2001) and TSB 01-06-01-028A (Mar 18, 2003) GM has stated that piston slap is not detrimental and will not affect the service life of the engine. Indeed, many owners report reaching 300,000 miles despite hearing piston slap. Valve lifter noise is a light, rapid metallic clicking.

The most common cause of rattling noises from the wheel area being loose or a worn strut mount or the strut coming apart. This rarely is a cause for alarm but of course can be very annoying.

What to do if your car makes a rattling noise?

Before you spend time or take your car to an independent mechanic, make sure it isn’t covered by the manufacturers warranty. If you are no longed covered under warranty, consider having your rattling noise inspected and repaired by a mobile technician from YourMechanic. Was this answer helpful? Thank you for your feedback! Sorry about that.

What should I do if my lift makes a rattling noise?

A front end inspection on a lift would be the best way to identify the noise of the loose or broken component. This could be a number of things, but the first things I noticed is the age and mileage of your car. It should still be under warranty. I recommend taking it to the dealer for this repair.

A steady whine from the front that is best heard while stopped or during low speed turns. With the steering wheel straight, the whine may be null or low, but the noise increases noticeably when the steering wheel is turned. This is often caused by low power steering fluid, which indicates a leak that must be corrected.

You can hear lifter click best around the top of the engine, and isolate the noise with a stethoscope against the valve cover. It will occur at idle and increases as you rev the engine, continuing even when the engine is warm. Valve lifter noise is detrimental and should be addressed quickly.

In TSB 01-06-01-022 (Aug 22, 2001) and TSB 01-06-01-028A (Mar 18, 2003) GM has stated that piston slap is not detrimental and will not affect the service life of the engine. Indeed, many owners report reaching 300,000 miles despite hearing piston slap. Valve lifter noise is a light, rapid metallic clicking.

Where can you hear the knocking of the engine?

The knocking can be heard around the top of the engine, but is much louder if you listen in the front wheel wells or beneath the truck. After a few minutes, engine heat closes the piston/cylinder tolerances and the knock goes away.

Why does my Toyota RAV4 make a whining noise?

If it gets too low on fluid they’ll make the it’ll whine a lot. You need to check the fluid level and fill it back up to the factory fill line. The pump can also go out. To determine if it is the power steering pump, turn the wheel left and right with the vehicle sitting.

Why does my Audi make a whining noise when I start the car?

A bad torque converter can cause a whining sound when starting your vehicle. A good place to start would be to check the transmission fluid. You’re going to want to check it for both color, and metal content. If you see any flecks of metal on there, it is probably going to need serviced.

Where does the clunk come from on a Chevy Silverado?

The clunk will appear to come from the front, under your feet. When upshifting from 2nd to 3rd or downshifting from 3rd to 2nd, the 4L60E transmission may clunk. In TSB 01-07-30-042B (Jan 16, 2004) GM has stated that this is normal and no service is required.

What are the symptoms of a bad throttle position sensor?

This is another failure mode of the TPS, which indicates that it is falsely limiting the power being requested with your accelerator pedal foot. You may find that your car will accelerate, but not beyond a speed of 20 – 30 MPH. This symptom often goes hand in hand with loss-of-power behavior.

What causes a howling noise in the rear of a car?

Cause:Worn rear pinion bearing or worn gear set Noise:Howl without whir or rumble while accelerating at any speed (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading Noise:Howling while accelerating over a small speed range (gears previously quiet) Cause:Worn gear set due to lack of lubrication or overloading

How does the ABS system work on a Chevy Silverado?

It uses an ABS system to monitor the brake pedal pressure and pump the brakes automatically for drivers if the wheels lock up. This is designed to help prevent skids and give the driver more control over the vehicle during inclimate weather. However, it is possible for the ABS system to fail or to malfunction.

Why does my Chevy Silverado make a whining noise when I accelerate?

A whining sound when accelerating is almost always caused by a bad accessory attached to your Silverado’s engine. Here are the most common causes of whining noises when accelerating: 1. Bad Alternator. When an alternator is going bad, it’ll often begin to put out a high pitched whining sound.

How to troubleshoot Chevy Silverado ABS system problems?

Remove the fuse for the ABS system with a fuse puller located in the fuse box cover. Check the fuse to make sure that it is not blown. If it is, you’ll need to replace it with another fuse of the same amperage. Look behind each wheel of the Silverado. On the back of the wheel hub are the wires for the ABS system.

What does the ABS light on a car mean?

The ABS Light is on. The most common sign of an issue with the ABS system is the ABS Light coming on. The ABS Light will show an amber color, and is the equivalent of a Check Engine Light, except it is only to diagnose problems with the ABS system.

Why does my Sierra 1500 make a popping noise when turning?

It’s not a cv axle doesn’t do it when turning, and the CV axles aren’t that old. Im gonna follow this, I have a 2008 Sierra 1500 doing the exact same thing. Driving down the road the truck is quiet as can be.

Why does my GM Truck make a grinding noise?

Original front end. Today, almost all the way to work (20 miles) started to get a faint grinding from the front end. When I got to work, looked for obvious stuff stuck to the axle, but nothing. Going home, it was quiet at first, but after 20 miles, same noise. The noise is almost like that of the 4wd being engaged on dry pavement.

What kind of noise does front suspension make?

Noise in front suspension ( 05′ z71 ) when turning wheel to the left. Major Vibration?!?!

Original front end. Today, almost all the way to work (20 miles) started to get a faint grinding from the front end. When I got to work, looked for obvious stuff stuck to the axle, but nothing. Going home, it was quiet at first, but after 20 miles, same noise. The noise is almost like that of the 4wd being engaged on dry pavement.

What causes low pitch rumble at 20 miles per hour?

Cause:Faulty gears or improper installation Noise:Low-pitch rumble at all speeds over 20 miles per hour Cause:Worn carrier bearings Noise:Whirring during acceleration/deceleration at about 10 miles per hour Cause: Worn pinion bearings See Also: Ask Away! with Jeff Smith: How to Fix Driveline Vibrations by Adjusting Pinion Angle

Why does my car make a rumbling noise?

The exhaust system carries the exhaust gases from the front of the car to the rear. They are designed this way so you don’t inhale the exhaust fumes and also to quiet the noise engines make. A leak anywhere in this system makes a rather distinct rumbling noise.

What causes a car to hesitate at 45 mph?

Basically – part throttle, light load, slight grade or hill. 45 to 60 mph Engine will start getting to wear it is working, starts to sound “different” and run a bit rougher, then it will buck or hesitate. It will not always buck or hesitate once it runs rougher, but it will ONLY do it after the load, sound, and running rougher have started.

Why does my car whine when I hit 20mph?

Once I hit 20mph or so there’s a very loud whine when accelerating but is quiet when you’re not touching the gas or if in neutral revving it there’s no noise as well. When I let off the gas the whine almost turns to a grind and goes away until I tap the gas again.

Cause:Faulty gears or improper installation Noise:Low-pitch rumble at all speeds over 20 miles per hour Cause:Worn carrier bearings Noise:Whirring during acceleration/deceleration at about 10 miles per hour Cause: Worn pinion bearings See Also: Ask Away! with Jeff Smith: How to Fix Driveline Vibrations by Adjusting Pinion Angle

Why does my rear differential make a whirling noise?

Rumbling and whirring noises at speed over 20 mph, moreover, can be the result of worn carrier bearings. For vehicles with C-clip axles, the rear differential noise may change at different turns.

Why is my car making a grinding noise?

Iiimmediately pulled over and stopped. I pulled forward to try and pinpoint the noise and it was gone. No problems the rest if the way home. It has been inconsistent this way for a month. Seams to aggravated easier with hard acceleration. But not always. Took it in and they were not sure. Suggested the carrier bearing.

What makes a whine when the steering wheel is turned?

With the steering wheel straight, the whine may be null or low, but the noise increases noticeably when the steering wheel is turned. This is often caused by low power steering fluid, which indicates a leak that must be corrected. The most recent GM p/s fluid part number is 8902-1185.

What kind of noise does a Chevy 4.3 make?

by Contributor. A common complaint with the Chevy 4.3 engine is that it doesn’t idle well, it’s loud and makes awkward noises. Examples of this are staling, lurching and poor acceleration. Poor idling and loud engines usually go hand-in-hand.

Why does my 5.3 liter Vortec make a ticking noise?

Causes of Startup Noises in a 5.3L Vortec Valve Lifter. Lifter tick is a common occurrence in V-8 engines like the Chevy 5.3-liter Vortec. This ticking sound is caused by the valve lifters, which are filled with oil during engine operation.

by Contributor. A common complaint with the Chevy 4.3 engine is that it doesn’t idle well, it’s loud and makes awkward noises. Examples of this are staling, lurching and poor acceleration. Poor idling and loud engines usually go hand-in-hand.

Why does my V8 engine keep bogging out?

Fluttering and bogging can be caused by a wide variety of issues. A few common causes are issues with the fuel, ignition, or engine management systems.

Author Image
Ruth Doyle