Other

Why does my 97 Chevy c1500 not start?

Why does my 97 Chevy c1500 not start?

I have a no crank/no start situation with my 97 chevy C1500. Battery juice is good, I can get the starter to engage when jumping at relay point. I’m not recieving power at starter relay from the ignition, shows a ground instead. Tried shifting through ranges and still no start.

What causes Silverado to have intermittent no crank?

I’ll be honest with you, finding the cause of a Silverado intermittent no crank condition is no fun. It’s a complicate these that involves multiple switches and three computers. All the signals have to line up before the Electronic Control Module (ECM) will ground the starter relay.

Why does my GM car say no start no crank?

How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.

What to do when your GMC Sierra won’t crank?

When starter won’t crank, pull the starter relay in underhood fuse block. Terminal 30 is hot all the time. Use proper jumper wire between terminal 30 and terminal 87, the starter motor should crank the engine. Again, make sure tranny is out of gear and parking brake is set.

I have a no crank/no start situation with my 97 chevy C1500. Battery juice is good, I can get the starter to engage when jumping at relay point. I’m not recieving power at starter relay from the ignition, shows a ground instead. Tried shifting through ranges and still no start.

Why does my GMC Sierra 1500 not crank?

Use proper jumper wire between terminal 30 and terminal 87, the starter motor should crank the engine. Again, make sure tranny is out of gear and parking brake is set. If it cranks then hopefully the starter motor is ok. That might show the problem is on the control side of relay. I’m not saying the relay is faulty.

How to diagnose a Silverado intermittent no crank?

In order to diagnose a Silverdao intermittent no crank condition, you must understand how the starting system works. When you turn the key, the IGN switch acts as a signaling device. It receives a 5-volt reference signal from the body control module (BCM).

How does engine cranking work on a Silverado?

The ECM supplies voltage to the IMS. If the IMS contacts are closed, indicating either park or neutral, the voltage then flows to the Transmission Control Module (TCM) and then to a ground point. If the ECM sees the proper voltage drop it will allow engine cranking.

What kind of truck cranks but won’t start?

Truck cranks but won’t start – 1997 Chevy C1500 chevrolet… I have a 1997 Silverado with the 4.3 vortec motor. About 2 weeks ago my son was driving it and the way he explained it was the engine completely died on him, causing his guages to malfunction and his steering wheel to lock up.

Where does the yellow wire go on a Chevy c1500?

There is a fuse in the circuit and the yellow wire goes from the ignition to the start relay through the neutral switch or clutch. I appreciate the link, unfortunately it is the same diagram I have. Though taking a second I had an epiphany.

What is pin 86 on Chevy c1500 starter relay?

Pin 86 on the starter relay shows ground (I need to double check power with key turned to start) therefore the problem has got to be at the nuetral safety switch or it’s wiring. That is the only thing in line between those 2 points?

Why is my Chevy Silverado 1500 not starting?

If the battery is empty shortly after charging, the alternator should therefore be checked for a defect. If the battery is OK, a defect in the starter can be the cause of a non-starting vehicle. Age-related wear or a material defect can damage the starter. This is often noticeable by a clicking sound when trying to start.

Truck cranks but won’t start – 1997 Chevy C1500 chevrolet… I have a 1997 Silverado with the 4.3 vortec motor. About 2 weeks ago my son was driving it and the way he explained it was the engine completely died on him, causing his guages to malfunction and his steering wheel to lock up.

What kind of engine does a 1997 Silverado have?

I have a 1997 Silverado with the 4.3 vortec motor. About 2 weeks ago my son was driving it and the way he explained it was the engine completely died on him, causing his guages to malfunction and his steering wheel to lock up. I had it towed to my house and started going through the normal checks; fuses, relays, spark, compression, fuel….etc.

Why does my car not start when I crank the engine?

If the engine doesn’t crank, or makes an unusual noise when cranking, you may have a starting system problem. The car’s security system may have made an error that disabled the fuel or ignition system, or the chip in the key may have failed.

What to look for when your engine won’t start?

Check for a blown fuse that may be preventing a circuit from working properly, like the fuel injection or computer system. To operate efficiently, an internal combustion gasoline engine needs a good spark, the right amount of fuel, and good compression (a healthy mechanical condition).

What kind of car has no crank no start?

This topic contains 5 replies, has 4 voices, and was last updated by shin_gle 7 years, 9 months ago. I have a no crank/no start situation with my 97 chevy C1500.

What kind of truck is a 1998 Chevy Cheyenne?

My truck is a 1998 Chevy Cheyenne 1500, 5.0L V8, 137k miles, last tune up at 110k miles. Use valvoline oil explicitly, and change every 4k miles. I got into my truck this morning, it turned over, and then died. The gauges all activated and displayed adequate oil pressure, battery power, etc.

Why does my car not start when I turn the key?

This condition is usually due a failed fuel pump, a failed ignition coil, a failed ignition control module, a failed crank sensor, etc… that lets the engine crank (turn over) but does not let it start. A No Crank Condition means that the engine is not turning over when you turn the key to crank the engine.

Why does my Chevy Silverado turn over but won’t start?

Finished the job up and started the engine. It started normally and ran fine for about 1-2 minutes, then sputtered and died (almost like it ran out of gas). – I think I was reattaching the air cleaner at the time. Now it turns over, but that’s it. It just won’t start. I did find a bad ground wire from the frame to body.

Why is my Chevy C-K 1500 battery draining?

May also have a voltage leak due to a wire shorting out, or a bad connections somewhere. Connection at starter check it, Starter May be showing early signs of failure and showing this when its hot. 6 people found this helpful.

Can a battery be drained in a truck?

It had been so bad that ?I could charge the battery, start the truck and let it idle for 10 minutes and the truck would not start again unless I charged the battery again. So the battery was able to start the engine, but the alternator could not charge the battery back up because because of resistance in the corrosion. 1 people found this helpful.

Why does my 1990 Chevy Silverado not start?

My 90 would not start if the vacuum line to the MAP sensor was disconnected. The MAP is located behind the TBI. Be sure the vacuum hose is in good shape. Mine has to be replaced as the glue no longer worked and it leaked. If you have a vacuum pump, make sure the MAP can hold a vacuum or it needs to be replaced.

What to do if you connect a battery wrong?

Take it to a pro, connecting a battery wrong can do a few things, but wont be tracable unless you have a pro do it. Plus, like said above, its for your safety. Just replace the mega fuse. Fuses are there for a reason. If your damaged you will blow the fuse or a fuse again. The ’07 should be on the battery post I believe.

Author Image
Ruth Doyle