Why are there no lights on my 4WD?

2006 silverado 1500. 4×4 would not engage on mine. I would receive service 4wd message on dash and 4wd switch would change light locations randomly. Changed swich and it did not fix the problem.

Why does my 4 wheel drive not engage?

The transfer case could pose another reason why your 4 wheel drive fails to engage. This could be due to the vehicle not coming to a complete stop to allow it to engage. This is because the splined pin and gears of the actuator need to align 100% with the gears inside the transfer case.

When do you turn the 4×4 switch does it light up?

No the switch does not light up at all. The 4X4 and LOW RANGE in the instrument cluster only light up when I start the engine and then go out like all the others. Nothing lights up when I turn the 4×4 switch.

Why are there no lights on the selector switch?

I know this is an old thread but still very informational. On a 99 silverado 5.3 the switch lights would not come on also it was stuck in 2wd.l I replaced the actuator on the transfer case, checked the 4wd fuse in the cab, replaced the switch and the TCCM. Still no lights and no 4wd.

2006 silverado 1500. 4×4 would not engage on mine. I would receive service 4wd message on dash and 4wd switch would change light locations randomly. Changed swich and it did not fix the problem.

What does the 4 wheel drive light mean?

The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.

What does the blinking 4 wheel drive indicator mean?

So what is that 4 wheel drive indicator blinking on your dashboard means? The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.

How does a 4 wheel drive light work?

It accomplishes this by means of a small electric motor bolted onto the transfer case that shifts a pin in place to lock the center transfer differential. The actuator allows you to shift from 2WD to 4WD on the fly and back to 2WD without stopping and can be engaged and disengaged by means of a switch inside the cabin, usually on the dashboard.

How often should I switch my 4WD selector?

To avoid having your 4WD selector light come on and go off at random, it’s recommended that you switch your vehicle into 4WD at least once a month and properly maintain your transfer case fluid. When the engine is cool, remove the drain and fill plug at the bottom of your transfer case, which should be facing your rear axle.

Are there any lights on my Silverado 4WD?

So I switched into 4×4 and then the light on the switch died.. Drove for a few minutes, then came to a red light and it lurched, clunked, and went back into 2wd all by itself. Last time I read codes there was nothing, but I’ll try agian today.

What kind of car has no lights on?

My 2007 LBZ Duramax started doing the exact same thing today. When I left work, I had no lights on the 4×4 selector buttons and a Service 4WD message on the dash. As I drove home, the lights would go on and off intermittently.

Why are the lights on my 05 LLY not working?

Hey guys so on my 05 lly the 4×4 is acting up. For awhile it would ocassionally give me the Service 4wd message and the lights on the switch would go out. Then it would come back.

Why are there no lights on my GMC Jimmy?

The drivers door open sensor was broken out of the dash below the fuse panel and I pulled the broken assembly out and got interior lights… and the lights on my 4×4 selector came on for a minute and went back off. The other problem I was having was the plastic tab on the back wasn’t holding the wire securely to the 4×4 switch.

Why is the 4 wheel drive light blinking?

The 4-Lo engaged the low-range transfer case for rough and challenging off-road driving. Fast forward a few decades and, enter the Actuator. The actuator is a component found mostly on modern four wheel drives and is designed to electronically engage 4 wheel drive.

Is there an indicator light on the 4 wheel drive?

Automotive Repair/Damage… Hal: I have a 1996 chevy z71 1500, when I depress the switch to activate the 4×4 the 2 hi light comes on blinks a couple of times remains lit. When i … read more Vocational, Technical or Tra…

Why are the lights not working on my Silverado truck?

Alot of the times its the actual 4wd switch ( the one on the dash) sounds like you have no power going to the transfer case i had this problem on my 88 none of the lights would work…. check your switch on your transfer case you should have power on 1 side of the plug Ok. I tried unplugging the battery a few people said that worked for them.

Why is my 4wheel drive not working on my Chevy truck?

I have a 03 Chevy 1500. And when i bought it the guy who had it said the 4wheel drive module had gone out not sure but I have gone around on different forms looking and reading and I tried a few of them things, but they haven’t worked.

When does the service 4WD message come up?

Does the “SERVICE 4WD” message come up as soon as you start the truck, or does it only activate after you try to select a mode other than 2 Hi?

Why is my service 4WD indicator not working?

If the wires are broken, the actuator won’t operate and the actuator won’t move. If it does not move to the proper position, the buttons on the dash will blink and the “Service 4WD” indicator will be lit because the TCCM never sees a complete 4WD engagement. The ground wire to my front axle actuator was the culprit on my truck.

Why is my service 4WD message not working?

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code(s) stored in the transfer case control module will be of assistance in determining the exact fault causing the message to be displayed.

When does the 4 wheel drive message set?

The codes may be stored with or without you requesting a transfer case shift. The codes and message may also be set during normal driving conditions in Auto 4WD, 4HI or 4LO. The trouble codes often set intermittently set during extreme cold or warm weather, or when the battery has a low charge.

What does the service 4WD light on a GM Truck mean?

The solid lights on the 4WD buttons are telling you where the transfer case encoder motor thinks it is, and blinks on the mode that it is trying to go to after you push the button. If it fails to move to the new position, it goes back to a solid light on the original position and illuminates the “SERVICE 4WD” light.

Is there a push button 4 wheel drive switch?

On my 2000 Chevy 2500 -I have a service 4wd light on my dash and no lights on my push button four wheel drive switch. I have replaced the … read more Automotive Repair/Damage… Chevrolet Express 1500: 99 Chevy express 1500 vortec 350. Starting 99 Chevy express 1500 vortec 350. Starting problem. will start and run fine for several days.

Why does my 4 wheel drive switch go bad?

It seems like the truck has a mind of its own at times and will change in to four wheel drive low and it makes it hard to accelerate. I have found out that usually the two ground wires that are attached to the frame right under the front of the driver’s door is the culprit that causes the 4wd selector switch in the dash to go bad.

Is the 4WD select switch a warning light?

Bad 4wd select switch on the dash. 8 times of of 10. The other 2 times is the control module. Don’t be afraid to drive it, it’s a notice light, not a warning light. GM/ASE Certified Parts Manager.

Why is there a service 4WD light on my Trailblazer?

Re: “Service 4WD” light on Trailblazer – Possible causes? (Kari) Bad 4wd select switch on the dash. 8 times of of 10. The other 2 times is the control module. Don’t be afraid to drive it, it’s a notice light, not a warning light. GM/ASE Certified Parts Manager.

Why is my service 4WD light not working?

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code (s) stored in the transfer case control module will be of assistance in determining the exact fault causing the message to be displayed.

Why is my 4WD light not working on my GMC Sierra?

Selector Switch was giving me issues about 3 years ago (64,000 mi). Shifting out of drive,stuck in 4WD hi/low and couldn’t switch it back or shifts to neutral and cant switch to 2WD. The sensor in the transfer case had a bad seal and fluid was getting in and shorting it out.

What causes a service 4WD message to be displayed?

The 4WD transfer case encoder motor position sensor or the selector switch may fail causing the service 4WD message to be displayed. Fault code (s) stored in the transfer case control module will be of assistance in determining the exact fault causing the message to be displayed. Ready to sell? CarMax buys all kinds of cars

Why does the 4 wheel drive light stop flashing?

The transfer case neutral position needs to be selected before you attempt to engage 4WD. The selected position indicator light will flash until the transfer case completes the shift. When the shift is complete, the indicator light for the selected position will stop flashing and remain ON.

Why is my 4WD not working on my 2002 truck?

On some 2002 model year trucks, the Transfer Case Control Module (TCCM) can have trouble waking up when the engine computer tries to talk to it. Fuse #8 in the engine bay fuse block provides power to the TCCM. Pulling this fuse and replacing it will usually wake the TCCM up and allow the use of 4WD for a time.

How much does a service 4WD light cost?

Service 4wd light has been coming on for a while, time to do something about it now. Luckily I can get a used TCCM from a wrecker for $125, about the same price as the dealership charges for the test. Have already checked the 4wd switch and replaced the encoder motor. Hope this helps someone else down the road.

Why is the mode light on my 4WD switch flashing?

Here are some of the reasons why the mode light on the 4WD switch might be flashing: The mode light for a selected shift will flash until the shift is complete as indicated by a switch in the front differential.

What to do if there is no light in the dash?

No Light in car dash? Top 4 things you can do to fix DIY – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. An error occurred while retrieving sharing information.

Why are there no lights on the dash?

No lights on the dash come on and I have tested and there is no power going to the motor on the t-case. Any ideas? I have tested all the fuses I could find and have switched out relays under the hood to check that, but still nada. PLEASE HELP the snow is about to fly

Is there a light on my 4×4 engine?

Nothing lights up when I turn the 4×4 switch. No the switch does not light up at all. The 4X4 and LOW RANGE in the instrument cluster only light up when I start the engine and then go out like all the others.

How can I tell if there is no power in my light switch?

The best way to check to see if there is power entering the switch box is with a voltmeter. If you don’t have power in the sw box, then the problem lies somewhere in the circuit between the sw box and the breaker/fuse box. Do you know what else is on the circuit, and have you check those??

When do I switch from 2WH to 4WD?

The light flicks on for ~0.25 to 0.5seconds when I switch from 2WH to 4WH. This happens about 50% of the time. In either case it always seems to engage the 4WD system. So it only flickers the first time you go into 4wd high then it just stays off, but you do have 4wd and drive to the front wheels?

Why are the 4×4 buttons not lit up?

Well fuses are good, checked #15 and #36 — the wires to the 4×4 buttons are getting power. Pushed around on the module below the seat and that made the orange neutral light flicker for a second then out. Made sure it was grounded and won’t flicker again. Side note the letters on the buttons light up, just not the orange lights.

What should I do if my 4×4 wont engage?

Restart truck and while moving slowly forward turn left or right. If you feel that drag on the front end you are in 4×4 and have a bad 2/4 switch on the transfer case and you just tricked your truck into thinking that it works. Try it, it’s free and cant hurt.

What to do if your 4WD system fails?

The two common failures in the 4WD system is the shift motor, and the control module. I went ahead and replaced the shift motor. This may seem like an expensive part, but you can actually get a new transfer case shift motor from Rock Auto for $64.00.

Why is my dash light not working on my 4×4?

The 4×4 issue could be the T case shift motor, the transfer case control module, the dash switch, or a fuse controlling any of the above. Are the lights glowing on your dash switch?? As for the heated seat, when the light flashes and goes off, you either have a wiring issue, open heating element, or shorted element. w/ 3.55 gears.

Why is my 4 wheel drive not working?

Not open for further replies. I put my truck in 4wheel drive and it doesent switch. It still powers only the rear wheels. Usually I can hear it switch over and feel it when I drive but nothing. In snow/ice only the rear wheels spin. I probably havent used 4X4 since last winter.

Why are there no lights on my 4WD?