Other

Why are all the lights on my Chevy Cobalt not working?

Why are all the lights on my Chevy Cobalt not working?

The next day he did some digging and found a blown Fuse for the Parking Lights in the Fuse Block under the hood and replaced it. Problem solved, or so he thought. Moments after installing the new 15A Fuse the Dash Lights were out again. This is also when he noticed his Tail Lights, Side Marker Lights, & Turn Signals weren’t working.

Are there any electrical problems with my 2005 Cobalt?

I had some electical problems with my 2005 cobalt as well. The headlights would not turn OFF – even when the car was off. It caused the battery to run down, etc. I took it to the dealer and they replaced the entire fuse block. The dealer said that this was the first time he had seen this problem & the first time he had to replace a fuse block.

Is there a free fix for a Chevy Cobalt?

Should be a free fix if car still under warranty. Have the same problem for the sixth time going into the dealer today. last time replaced the shifter assembly, the time before that the ignition. Now the key will not gome out of the ignition and ther is no lock on the sifter, i can push it from drive past neutral and inot reverse or park.

What’s the problem with my Chevy Cobalt wipers?

If I disable my amp then it works fine, I’m guessing that its drawing to many amps throguht he electrical system, the wipers have a kill switch for when they have to heavy of a load on them like snow, so maybe its causeing that to kick into effect. Anyone know where I should groud this at?

How do you turn off the heated seat on a Chevy Cobalt?

Both indicator lights will be lit to indicate that the setting is on high. Press the side of the switch with the single indicator light to go to the low setting. The indicator light will be lit to indicate that the setting is on low. Return the switch to the center to turn off the heated seat.

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

Who is the owner of the 2008 cobalt?

2008 Chevrolet Cobalt Owner ManualM GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem, and the name COBALT are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice.

Why is my tail light not working properly?

Common causes for this condition is a loose fitting bulb inside the socket. To test for this condition expose the tail light bulb in question. Next, switch the tail lights on and move the bulb around slightly in the socket. If the bulb flickers tighten the socket or replace the bulb/socket to regain proper operation.

What to do when your tail light flickers?

If the bulb flickers tighten the socket or replace the bulb/socket to regain proper operation. If the complete system flickers (all bulbs flicker) wiggle the tail light fuse, relay and associated wiring at the headlight/tail light switch.

How are the tail lights and dash lights connected?

Tail lights and dash lights are connected through the tail light (and/or brake light) fuse. When the dashboard goes dark you know you are driving without tail lights. Make certain to use the exact replacement dashboard light fuse to avoid the potential of electrical failure in your vehicle’s dashboard.

The next day he did some digging and found a blown Fuse for the Parking Lights in the Fuse Block under the hood and replaced it. Problem solved, or so he thought. Moments after installing the new 15A Fuse the Dash Lights were out again. This is also when he noticed his Tail Lights, Side Marker Lights, & Turn Signals weren’t working.

What should I do if my dash lights are not working?

Normal operation is ground when off then positive when dash lights are on (voltage varied to dim the lights). My parking fuse kept blowing anytime the auto lights turned on the dash lighting. Also try a 20a fuse over a 15.

Where are the fuses on my Chevy Cobalt?

After inspecting under the car, all over the Engine Bay (which included removing the Fuse Block from its mount), under the Dash, and in the Trunk & around the Trunk Lid, I found nothing. I put everything back together and figured I’d try reinstalling another new fuse.

What should I do if my car lights are not working?

Also try a 20a fuse over a 15. If the 20 blows its probably a 12v constant wire (brown for dash lights) but if it doesnt blow id bet jts a low voltage wire like the grey one Not open for further replies. Did you find the recommended reading relevant to this discussion?

After inspecting under the car, all over the Engine Bay (which included removing the Fuse Block from its mount), under the Dash, and in the Trunk & around the Trunk Lid, I found nothing. I put everything back together and figured I’d try reinstalling another new fuse.

Also try a 20a fuse over a 15. If the 20 blows its probably a 12v constant wire (brown for dash lights) but if it doesnt blow id bet jts a low voltage wire like the grey one Not open for further replies. Did you find the recommended reading relevant to this discussion?

How to troubleshoot a daytime running lights problem?

Use a Phillips screwdriver to remove the light assembly. Place all of the screws in a safe place so that none of them are lost. Tug on the electrical connector at the rear of the assembly. If the connector comes out or is loose, plug it securely into the rear of the assembly.

Normal operation is ground when off then positive when dash lights are on (voltage varied to dim the lights). My parking fuse kept blowing anytime the auto lights turned on the dash lighting. Also try a 20a fuse over a 15.

When do you need to replace your running lights?

They also increase your road vision during sunrise and sunset. If something goes wrong with your daytime running lights, they should be fixed immediately. Whether your vehicle uses high beams or has a separate light assembly for the daytime running lights, the troubleshooting process is the same.

Why do my running lights not come on?

If your daytime running lights do not come on, stay on when the car is off, or produce a burning smell, you may have to replace their module. 1. Daytime running lamps do not come on 2. Daytime running lamps stay on while the car is off 3. Burning smell Daytime running lights are a safety feature found on many late model vehicles.

Why is my running light not working on my Silverado Sierra?

Another thing the only time they do turn on is when I activate the alarm. I wouldn’t worry about it, on my ’03 they were melting the housing so when my dad had it he took them out. I would think if they turn on with the alarm then it wouldn’t be a fuse. Probably a sensor somewhere.

Use a Phillips screwdriver to remove the light assembly. Place all of the screws in a safe place so that none of them are lost. Tug on the electrical connector at the rear of the assembly. If the connector comes out or is loose, plug it securely into the rear of the assembly.

Why do you need daytime running lights on your car?

by Daniel Valladares. The daytime running lights on your vehicle are a safety feature that allow other drivers to spot your vehicle on the road during daylight hours. They also increase your road vision during sunrise and sunset. If something goes wrong with your daytime running lights, they should be fixed immediately.

Author Image
Ruth Doyle