Which is the correct direction to remove the fan clutch?

Which is the correct direction to remove the fan clutch?

Directions for removing the fan clutch assembly may also be included on the vehicle’s fan shroud. Vehicles that have the water pump turning the samedirection as the crankshaft need a left hand threaded nut. These water pumps turn in a clockwise direction.

What is an electric fan clutch?

The fan clutch is a cooling system component that controls the operation of the engine cooling fans. While many newer vehicles now use electric cooling fans to keep the engine cool, many older vehicles used a mechanical fan clutch to control the fans.

Is it necessary to remove retaining nut from fan clutch?

CAUTION:For removal of the fan clutch retaining nut from the water pump, it is necessary to determine water pump rotation. This is necessary on vehicles that have the single, large fan clutch assembly retaining nut. Attempting to loosen the fan clutch assembly in the wrong direction could result in vehicle damage.

What happens to the fan when the clutch goes bad?

The cooling fan clutch is part of the cooling system that engages or disengages the fan depending on the engine temperature. It is typically bolted between the water pump pulley and the fan. When a fan clutch goes bad, your fan may run at all times, or it may not run at all.

How do you remove a clutch on a Ford Fan?

Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise. Once loose, turn the fan in the same direction and it will come right off.

How is a fan clutch attached to a water pump?

This large nut is directly attached to the fan clutch mechanism. The water pump pulley has about 1-inch long threaded post on the end of the pulley. The nut is screwed onto the post on the water pump pulley. This requires a large wrench and a tool to lock the pulley from moving as the nut is broken loose. Remove the fan shroud.

How do you remove a water pump from a Ford Fan?

IThe shroud will come out with the fan. Remove the top radiator hose by using a screwdriver to loosen the clamps. Hook the ends of the water pump pulley lock on the bolts on the outside of the water pump pulley. Remove the large nut on the fan with the 1-1/16 wrench by turning counter clockwise.

How do you replace a fan on a Ford?

Replace the fan by holding the nut perfectly level with the water pump post and start the nut by hand, making sure not to strip the threads. Once started, spin it on the rest of the way by hand, turning the fan clockwise. Once it will not turn any farther, use the large wrench and give it an assertive yank to lock it on.