Which is better a blazer or a S10?
Which is better a blazer or a S10?
S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.
Is the 4×4 light on on my Blazer?
I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.
What does the 4 wheel drive light mean?
The purpose of the 4 wheel drive light is to indicate when you have engaged 4WD mode by selecting 4H. When the light flashes continuously for more than 30 seconds it signifies there is a problem somewhere on your drivetrain system and that 4WD has not engaged properly.
Why does my Blazer vibration go away when turning left?
You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.
How to find custom wheels for a Chevy S-10?
Search for 1000’s of Chevrolet S-10 Custom Wheels using our custom search tool for rims and tires. There has never been an easier or more complete wheel search available on any other website.
I read what you said about the wires on the Blazer, but mine were not corroded. I took it off and cleaned it up anyway and it came back on, but as soon as I turned the key off she was gone again. I don’t have any lights lighting up on the 4×4 switches. Service 4X4 light is on in the dash. I don’t know what is going on.
Is there an amp in the back of my Blazer?
Well, just before this starting happening, my son and I installed a sub and amp in the back of the Blazer.
You were RIGHT ON when you said that it was coincidental with having installed an amp. As an FYI for you and your readers: They diagnosed the problem as a bad bearing (driver side, front). They said the reason the vibration went away when turning left was because the weight of the Blazer shifted to the right side.
S10 2WD’s have a drum to drum mounting width of 54.5″ which is perfect for a T-Bucket with larger back wheels. The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels.
Which is the best rear end for a S10?
The S10 10bolt 7.5/7.625″ rear end is a good choice for the light low to medium horsepower small block cars. If you’re running a blower, turbo, nitrous, etc you will probably want to step up to a larger rear like a 9″ or 12 bolt. Its pretty easy to find a good one if you are in an area with a few junkyards.
What’s the difference between a blazer and a T?
The Blazer and 4WD models have about 4.5-5″ more overall width and works well for 26 and newer fender-less roadsters, and 23 style T’s with narrower rear wheels. Rear axle ratios can be found by looking at the sticker in the glove box that has the RPO codes on it.
How big should the back of a S10 be?
You want to make sure the track width on the back is at least as wide as the front. With a 48″ wide front axle, you should be ok with an 54.5″ S10 rear on a ’23 with wider tires.
