Where is the solenoid Assy on a focus?
Where is the solenoid Assy on a focus?
The solenoid assy is easily found on the top right of the engine with 4 vacuum pipes going to the two solenoids as shown in my photos.
Where are the swirl flaps on a focus?
After doing some research, I have found that many people have replaced the Engine Air Shut off Control Assy which is basically 2 solenoids on a metal plate. One controls the vacuum pressure to the Swirl flap actuator and the other solenoid controls the Intake manifold switchover flaps, which are lower down on the engine, at approx 4300rpm.
What is the P2008 intake manifold air control actuator?
P2008 – Intake manifold air control actuator / solenoid, bank 1 -open circuit Trouble Code Fault Location Probable Cause P2008 Intake manifold air control actuator / s Wiring open circuit, intake manifold air
Why do I have a P2008 code on my solenoid?
Nonetheless, it should be noted that while code P2008 is mostly concerned with electrical open circuits in the actuators’ control circuit, vacuum leaks can also cause this code on some applications, since under these conditions the runner flaps’ position sensor can produce a signal that does not agree with the runner flaps’ desired position.
The solenoid assy is easily found on the top right of the engine with 4 vacuum pipes going to the two solenoids as shown in my photos.
After doing some research, I have found that many people have replaced the Engine Air Shut off Control Assy which is basically 2 solenoids on a metal plate. One controls the vacuum pressure to the Swirl flap actuator and the other solenoid controls the Intake manifold switchover flaps, which are lower down on the engine, at approx 4300rpm.
How does the intake manifold runner control system work?
The intake manifold runner control system improves the engine airflow process, which helps performance and efficiency. Although each carmaker’s design is different, the basic concept involves opening and closing butterfly valves within the intake manifold.
What does motorized actuator do on Focus 2.0?
The motorized actuator houses internal switches to provide feedback to the Powertrain Control Module (PCM) indicating linkage and plate position. Under about 3000 rpm the vacuum solenoid will be energized. This will allow manifold vacuum to be applied and the butterfly valve plates to stay closed.
