Where is the power steering reservoir on a Ford Taurus?
Where is the power steering reservoir on a Ford Taurus?
The OHC-equipped Taurus uses a remote reservoir for the power steering fluid. This is located on the right side of the strut tower while the standard OHV model has the reservoir built into the pump housing.
Why does the steering feel stiff in a Ford Taurus?
Determine if the steering feels abnormally stiff. This may be caused by incorrect tire pressure, ball joints that are worn or out of adjustment, or a steering gear or wheel bearing that is out of adjustment. Turn the steering wheel from side to side with the engine running and notice if the power assist feels the same in both directions.
How to check the fluid level in a Ford Taurus?
Check the fluid level by starting the engine and allowing it to warm up. While the engine is idling, turn the steering wheel to the left and right a few times to allow air to escape from the system. Shut the engine off and remove the cap. On OHV models, remove the cap, wipe it off and replace it. Remove the cap again and check the level.
When to replace rack and pinion on Ford Taurus?
On a Ford Taurus, the power steering is controlled by a rack and pinion set, which is the most common power steering system. After several years of wear or improper maintenance, a rack and pinion system can fail and needs to be replaced.
The OHC-equipped Taurus uses a remote reservoir for the power steering fluid. This is located on the right side of the strut tower while the standard OHV model has the reservoir built into the pump housing.
Why is the steering not working in my Ford Taurus?
If the effort is not the same in both directions, there is either a leak in the steering gear or a clogged fluid passage in the gear. Turn the steering wheel from side to side, again with the engine running, and notice if the power steering system is helping turn the wheels.
When do rack and pinion systems need to be replaced?
After several years of wear or improper maintenance, a rack and pinion system can fail and needs to be replaced. Rack and pinion systems can become contaminated if the hoses are deteriorating or if the power steering fluid is contaminated by outside fluids or moisture.
If the effort is not the same in both directions, there is either a leak in the steering gear or a clogged fluid passage in the gear. Turn the steering wheel from side to side, again with the engine running, and notice if the power steering system is helping turn the wheels.
