Where is the ignition switch on a Chevy Malibu?

The Malibu’s ignition switch is not what your key goes into. That is called the lock cylinder. The ignition switch typically sits directly behind the lock cylinder. It has three main functions. Power the Accessories- This should be what you get when you turn the key to the first position.

Why does my GM ignition key not turn?

Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Category Autos & Vehicles.

What are the symptoms of a bad ignition switch?

We’ve compiled some of the most common symptoms of a bad ignition switch . These include stalling issues, not starting, and no power to the radio or accessories. The Malibu’s ignition switch is not what your key goes into. That is called the lock cylinder. The ignition switch typically sits directly behind the lock cylinder.

What to do when your ignition key won’t turn?

If for example the front wheels are pointing to the left, then go inside your vehicle, step on the brake, and turn the steering wheel MORE to the left, then WITHOUT RELEASING pressure, try and turn the key to start your engine. Now if your front wheels are pointing to the right, use the same method, but turn the steering wheel to the right instead!

Is there a power lock on a Chevy Malibu?

I have a 2004 Chevy malibu. From the outside the key unlocks all the doors. It however only locks one door. On the inside neither the driver side or passenger side doors powerlock buttons work and i already replaced the whole set up on each side.

Is there a problem with my Chevy Malibu key fob?

To avoid this, cancel and sign in to YouTube on your computer. Chevrolet (Malibu) key fob battery replacement, newer version. An error occurred while retrieving sharing information.

Where is the fuse on a Chevy Malibu?

If the key fob works to lock and unlock the doors then the fuse is okay. If you can follow a schematic, download this for the 2008 models. Minor changes since then, but the important stuff is still the same. Find figure 58. The door lock fuse is at the top.

Why is my key stuck in the ignition on my Chevy Malibu?

This prevents your Malibu from “rolling off”. When the vehicle is in any other gear than park will act like neutral and roll away without the parking brake on. Leaving the key stuck in the lock is the manufacturers way of telling you that you need to put it in park before you leave the driver’s seat.

When do I need to replace the key on my Chevy Malibu?

They kindly replaced at no charge even though the warranty was long expired. The key date is April 1 2019. If you had the shifter replaced prior to that date, the problem can reoccur.

Why does my Chevy Malibu not recognize Park?

If I restart the car, shift into Drive, then shift to park, it eventually recognizes it, but sometimes it takes two or three attempts to get it to respond and allow me to turn the car off. Obviously I need to bring it in for service, but my reason for posting is to see if others have encountered this.

When is the new key for my Chevy Malibu?

The April 1 2019 date is in the bulletin. The key date is April 1 2019. If you had the shifter replaced prior to that date, the problem can reoccur. If you received one April 1 2019 or later you have the new switch design and should finally be permanent. I had a shifter fail in 2017 around 30000 miles.

What to do if your ignition key won’t turn?

This feature is not available right now. Please try again later. Sometimes the ignition key won’t turn or rotate. If that happens the vehicle won’t start, the steering wheel won’t turn and it won’t shift into gear. On a late 90’s or early 2000 GM vehicle this is the way to get it apart so you can replace the tumbler. Loading…

What causes a car key to not turn over?

This can trap a piece of the key inside the cylinder, causing more damage. Also known as a key cylinder, the ignition lock cylinder is another area that could be causing issues with a key turning over. Below are the two most common problems associated with the ignition lock cylinder and the key not turning.

Where can I get a key for my Chevy Malibu?

Call an automotive locksmith that offers a mobile service for Chevrolet Malibu cars. We can help you with that. Tow the car to the dealer. Order a key online and have the dealer or locksmith cut and program it for you (if necessary). A word of caution: The type of key you need depends on the year and model of your Chevrolet Malibu.

When did Chevy Malibu stop using transponder keys?

Transponder Chip Keys: 2004 to 2016. Non-Transponder Keys: 1978-1984, 1997 to 2004. Please keep in mind that while some keys or key fobs may look the same, they have different capabilities/frequencies/keyways. Therefore, having the right key or key fob is essential.

When did the Chevy Malibu first come out?

Chevrolet Malibu was introduced in 1964. This model has four versions and four types of keys. Non Transponder Key: 1997-2004 – One type of key. Transponder Chip Key: 2004-2016 – Two types of keys.

What to do if your Chevy Malibu ignition key goes bad?

If you have a key that’s in better shape, you’d want to use that one to make a duplicate. If you have no key to duplicate, many manufacturers can use the VIN number to cut you a brand new OEM key. Just be prepared to prove ownership to Chevy in some way. The Malibu’s ignition lock cylinder itself can go bad over time.

How much does it cost to replace a Chevy Malibu key?

In short, replacing a Chevrolet Malibu key can cost between $50 to $330. The cost depends on a few factors: Type of key The year manufactured Time of day & your location Where you get a key replacement (dealer, automotive locksmith, online, etc.)

How many types of keys does a Malibu have?

And more. The Chevrolet Malibu was introduced in 1978. This model has four versions (Chevrolet Malibu w/Prox, Chevrolet Malibu w/o Prox, Chevrolet Malibu Classic, Chevrolet Malibu Max) and twelve types of keys. Remote Key Fob: 2016 to 2020.

What to do if your car key won’t turn in?

Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer. Welcome to Despair Repair, This is a channel dedicated to drivers and car owners who want to make some simple diy repairs and maintenance around their cars.

Unlike in many other Chevy vehicles, the Malibu has an ignition switch located under the steering column trim panels just behind the steering wheel. Disconnect the negative battery cable using an 8 mm wrench to unscrew the terminal bolt. Remove the 10-amp air bag fuse located in the fuse block on the end of the driver side of the dash.

Where is the belt guard on a Chevy Malibu?

The belt guard is located between the water pump and the power steering pump. Rotate the belt tensioner pulley to release the belt tension. Use a long 13 mm box wrench or 3/8-inch drive breaker bar, depending on your particular model. Slip the belt off the alternator pulley.

Where is the reservoir on a Chevy Malibu?

The reservoir is the plastic container located at the front and to the right (passenger side) of the engine compartment. Detach the belt guard from the top of the belt. if your particular Malibu model is equipped with it, using a ratchet and socket. The belt guard is located between the water pump and the power steering pump.

What happens if you replace the alternator on a Chevy Malibu?

Also, count the number of ribs on the pulley and make sure the new alternator pulley has the same configuration as the one you are replacing. Installing the wrong unit on your Malibu will eventually damage or break the alternator belt. Disconnect the negative battery cable using a wrench.

What kind of car is a 2000 Chevy Malibu?

Description: Used 2000 Chevrolet Malibu LS. Hamilton Honda is proud to offer this gorgeous 2000 Chevrolet Malibu in Bright White.

When to replace timing chain on 1998 Chevy Malibu?

Replace the timing chain every 100k miles! Loved the car, no problems at all. Then out of nowhere the timing chain broke at a little over 100k miles. Cost me over $2500. The mechanic told me he’s seen this happen A LOT with these cars!

What kind of engine does a Chevy Malibu have?

This 3.1 liter in these cars is the worst engine gm makes to work on.The lifters are loud especially when cold and with engine sideways everything hard to get at.I had to buy a special wrench to change thermostat (buried) starter buried in frame.Decent gas mileage but will never own another gm with a 3.1 liter..3.8 liter the best they make.

Is the Chevy Malibu a good little car?

I have had the thermastat, starter, all the pulleys, belt, fuel filter and fuel pump, radiator, brakes, coolant reservoir, water pump, the heater core and then quick connectors all repaired in the two years I have owned it. It has been broke down more than it has been running. I would never buy one ever again. Good little car!

What to do if your Chevy Malibu key is stuck?

Make sure your Malibu is in park. Even if it is in park, push the shifter up higher toward park while gently turning the key. You don’t need to manhandle anything. You’re just looking to see if the park lock mechanism is failing. If it is, the key should come right out.

What to do when your key is stuck in the ignition?

Give the wheel a wiggle while lightly trying to turn the key out of the ignition. If the steering lock is causing a bind, this will relieve the pressure and get the key out.

Where are the keys on a 2010 Malibu?

for a 2010 Malibu, there is a small plastic panel on the passenger side that is removable without tools. Once off, you can see the cable running from the shifter to the key switch. The plastic piece which attaches to the shifter had been stuck out of proper position. Once I jiggled the wire and moved the plastic piece, my keys came right out.

What should I do if my Chevy Malibu shift knob is stuck?

I replaced the ignition switch and that didn’t help. Some one mentioned that the shift knob has linkage that needs to completely return in order for a cable to pull a lock in the ignition switch that releases the key. It is called the Chevrolet Malibu Shift Interlock Solenoid. Once I replaced that part, everything worked fine.

What’s the Chevy Malibu shift interlock solenoid called?

It is called the Chevrolet Malibu Shift Interlock Solenoid. Once I replaced that part, everything worked fine. I put the old key cylinder and ignition switch back in and plan to try returning the parts I bought.

What happens when you turn the key on a car?

The higher rate of electricity gives the starter motor more “oomph” to turn the engine over. The process of starting the car begins at the ignition switch in the driver’s cockpit. The key turn completes a small circuit that tells the battery to release power to the starter solenoid.

How does a key turn work on a starter motor?

The key turn completes a small circuit that tells the battery to release power to the starter solenoid. The solenoid ramps up the power given to it and that power causes the starter motor to turn very quickly.

Why does my Chevy Malibu not start up?

1999 Chevy Malibu. Engine size = 6 Cylinder. The car will not start when the ignition is turned all the way over. The battery is fine and I think it is a switch problem. Sometimes I can leave it alone for a few hours and it will fire right up. Other times I just turn the ignition on and off about 5 or 6 times and it starts.

How do you remote start a Chevy Malibu?

After entering the vehicle, turn on the ignition. • During a remote start, the engine will run for 10 minutes. • Press and hold the button until the parking lamps turn off to cancel a remote start. On hybrid models, the engine will start only if needed for warming the cabin or for high-voltage battery charging. Lock Press to lock all doors.

How to replace a no start ignition switch?

GM Ignition switch replacement to fix a no start or intermittent start. Faulty ignition switch contacts can also cause the PassLock system to enable Click here to see step by step proceedures. http://www.thejunkmanadv.com/the-junk… Support the site, buy service manuals here : http://www.tkqlhce.com/click-7357719-… Loading…

Can you change the VIN on a Chevy Malibu?

The VIN allows the dealer or automotive locksmith to access the key code on file, i.e., to cut you a replacement key by code, which is a very fast and easy process. There are, however, two things to consider: For Chevrolet Malibu vehicles that are older than ten years, there are no codes available.

What to do if your Chevy Malibu wont start?

After shifting in to park try starting vehicle. If the vehicle does not start unless you push the shifter hard in to park you will need to adjust the shift cable as described (09077A) Check output from Park Neutral switch to ECM for proper signal. Check all terminals for loose or poor connections at Park Neutral switch and ECM.

How do you replace an ignition switch on a car?

Installing a Replacement Squeeze the release pin on the ignition switch so it’s flush with the side. The same release pin that stopped the switch from coming out now needs to be pressed in so you can slide the switch into place inside the ignition module. Slide the ignition switch into its hole.

Where is the electrical connector on an ignition switch?

Remove the electrical connector from the back of the old ignition switch, located on the right side of the column. Unscrew the two bolts that attach the old switch to the column and remove the switch. Bolt the new switch to the column and plug the electrical connector into it.

Where is the release pin on an ignition switch?

The new or rebuilt switch should slide easily back into its hole on the steering column. Align the shape of the cylinder and the location of the release pin with the coinciding grooves in the ignition module.

What kind of screwdriver to use to replace ignition switch?

If you don’t have a small enough screwdriver, you can use anything long and thin enough to press the pin, including a paintbrush handle or even a kabob skewer. Don’t use anything brittle that may break inside the hole to try to press the pin.

What happens if you have a faulty ignition switch?

A faulty ignition switch in your vehicle can cause several problems ranging from your car stalling and all lights going dark to the radio not working unless the key is wiggled from side to side.

Where is the fuse box on a Chevy Malibu?

It is located on the driver’s side of the instrument panel, behind the cover. It is located on the passenger’s side of the instrument panel, behind the cover. It is located in the engine compartment, near the air cleaner. How to check the fuses? How to replace a blown fuse? Why do car fuses blow?

Where is the fuse box on a 2001 Chevy S-10?

Chevrolet S-10 (2001) – fuse box diagram Year of production: 2001 Instrument panel The fuse block is in the instrument panel on the driver’s side.

Where is the ignition relay located in a car?

The ignition relay is often located in the fuse box under the hood. It can also be located in a fuse box under the dashboard inside of the car. The ignition relay’s exact location may differ from vehicle to vehicle depending on the design of the vehicle and the company that manufactured it.

What to do if your key is stuck in the ignition switch?

The key may be stuck in the ignition switch, but that shouldn’t stop you from turning it. If you don’t have a key, you will need to force the module to turn using a flathead screwdriver. Press the release pin inside the hole on the ignition module with a screwdriver.

What should I do if I need to replace my ignition switch?

Reconnect the cable to the negative (-) terminal on the battery, then insert the key into the ignition and turn it to start the vehicle. The vehicle should start without any issue. If it doesn’t, remove the ignition switch and reinstall it. Shut the engine off (if it starts) and disconnect the battery again.

Can a faulty ignition switch cause a no start?

Please try again later. GM Ignition switch replacement to fix a no start or intermittent start. Faulty ignition switch contacts can also cause the PassLock system to enable Click here to see step by step proceedures. http://www.thejunkmanadv.com/the-junk… Support the site, buy service manuals here : http://www.tkqlhce.com/click-7357719-…

How do you replace a Lumina light switch?

Take out the old switch and set the new one in place. Return the switch’s retaining screw and then plug the wiring harness back into the rear of your Lumina’s new multifunction switch. Use the trim tool to replace the trim along your steering wheel column. Replace your Lumina’s negative battery cable.

When to replace the Multi-Function Switch in vehicles?

The hazard flasher activation button and turn signal stalk are part of the multi-function switch assembly. When the time comes to replace the multi-function switch in your Vehicles if you have entry-level auto-repair experience, you can perform the job yourself.

What’s the best way to replace a switch?

If you have any doubt as to the design of your system, consult the factory repair information before switch removal. Step 1: Install the new switch. Screw in the new switch, then tighten it until it’s snug. Step 2: Reinstall the electrical connector. Step 3: Reinstall the negative battery cable. Reinstall the negative battery cable and tighten it.

Why is my door lock not working on my Chevy Malibu?

often the driver’s door lock/unlock switch is the culprit but also could be a wiring issue in a door harness wiring loom-most often the driver’s door. door locks fuse is in the cabin fuse block.

Where is the cabin fuse block located on a Chevy Malibu?

often the driver’s door lock/unlock switch is the culprit but also could be a wiring issue in a door harness wiring loom-most often the driver’s door. door locks fuse is in the cabin fuse block. Where is the cabin fuse block located? This is a duplicate of a thread you posted in the Gen8 area.

Where is the ignition switch on a GM PassLock?

Pull the radio out of it’s cavity. Disconnect the wiring connector and the antenna wire, and set the radio aside. On the left side of the radio cavity, there will be an opening, through which you will be able to see the Ignition Switch.

Where is the ignition switch on a Chevy Malibu?