Where is the fuel pump fuse on a Land Rover?
Where is the fuel pump fuse on a Land Rover?
Park your Land Rover on level ground and remove the fuel pump fuse from the fuse box underneath the dashboard. Start the engine, let it stall and turn off the ignition switch. Jack up both rear wheels off the ground with a floor jack, if you need extra space to work under the vehicle. Support the vehicle with two safety stands.
What’s the best way to change a fuel pump?
With the pressure relieved from the fuel system and the engine off, you can re-insert the fuse that powers the fuel pump. Place the cover back on the fuse box and return any pieces of the trim you may have needed to remove to access it. Make sure the vehicle is off before replacing the fuse you removed.
How do you change the fuel line on a Land Rover?
Connect the fuel lines to the filter fittings by hand first to avoid stripping the fitting threads. Hold the filter molded nut with the backup wrench and tighten the line retaining nut with the flare wrench. Lower your Land Rover with the floor jack, if you had to raise it.
How to replace a fuel filter on a Land Rover Discovery?
Coat two new O-rings with clean engine oil and install one on each of the line fittings. Position the new fuel filter into the mounting bracket with the arrow pointing in the same direction as the arrow on the old filter was pointing and tighten the bracket bolt with the ratchet and socket.
How to replace a fuel pump in a Range Rover?
Please try again later. My 2004 Range Rover HSE (160k klms) decided it wanted a new fuel pump so here is how I took it out. You can buy the entire fuel pump assembly from Land Rover (big $) but I decided to take it apart and only replace the pump. I ordered the BMW X5 replacement pump at a quarter of the cost from the local parts store.
The original procedure involved removing the body first, though it’s possible to do the job laying over the engine and reaching down the back of the engine, working with a mirror and by feel. The risk is in dropping something vital, damaging an adjacent part or unknowingly disturbing something that will cause problems later.
Do you have to change the fuel pump drive belt?
The fuel injection pump drive belt is also due for renewal at the same time but, as with the cam belt, many cars have not had this crucial work done. Compared to the cam belt change, replacement of the fuel pump drive belt should be quick and simple, but poor access makes it a real challenge.
Where does the fuel pump go in a 2007 car?
The details of gaining access from the engine bay vary slightly between the pre-2007 vehicles and 2007 models onward. Approaches vary when working from under the bonnet and removal of piping, covers and wiring depends on who is doing the job as well as the particular model specification.
