Where is the blower motor resistor on a 2006 Jeep Liberty?
Where is the blower motor resistor on a 2006 Jeep Liberty?
Open the passenger’s side door of the Jeep then the glove compartment door. Access to the resistor is through the back of the glove compartment.
Why is the radiator not working on my Jeep Liberty?
If the radiator fan is not working, it’s a serious problem. Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Liberty is running hot, and the fan is not running we’ve laid out the most common causes of this issue below.
How does the heater on a Jeep Liberty work?
At the simplest level possible, the heater works by passing hot coolant from the engine into a tiny radiator called the heater core. At this point, the blower motor blows air across the it and the newly heated air blows on to the driver and passengers. If the heater has stopped working in your Liberty, this process has failed in one way or another.
Why is the heater not working on my Ford Escape?
If the neither hose has any heat, you may have air in the cooling system, low fluid, or low pressure. If you look at your temperature gauge, and the engine is running hotter than normal, but there is not heat coming from the heater you may be having issues with the water pump.
What to do if your liberty has a bad temp sensor?
Your engine temperature sensor is responsible for relaying your engine temp to the ECU. Once the temp gets so hot, the ECU commands the radiator fan to come on. If your Liberty has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor.
If the radiator fan is not working, it’s a serious problem. Just because the radiator fan is not on does not mean that it is not working. They are designed to only run when needed. If your Liberty is running hot, and the fan is not running we’ve laid out the most common causes of this issue below.
Your engine temperature sensor is responsible for relaying your engine temp to the ECU. Once the temp gets so hot, the ECU commands the radiator fan to come on. If your Liberty has a bad engine temp sensor the radiator fan won’t know to come on, because the ECU won’t know how hot the engine is. You’ll need to locate and test the engine temp sensor.
What to do if your radiator fan is not working?
If it is blown, replacing the fuse will only solve the problem for a very limited period of time. Unless the wiring issue is fixed, the fuse will blow again. The wiring harness itself can go bad. Your author has personally had a shredded tire completely pull the fan wiring out of his vehicle. It can happen.
How can I tell if my Chevy Aveo radiator fan is bad?
You can test the voltage going from the fan relay to the fan itself. If it is getting 12+ volts, the fan should be coming on. But if it’s not, which means the fan has gone bad. This video from Ratchets and Wrenches is a phenomenal resource on how to properly diagnose a wiring problem.
