Where can I find the torque specification guide?

Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear.

Where is the spigot on a rear drive axle?

A straight roller bearing or spigot is mounted on the head of the drive pinion. All other bearings in the carrier are tapered roller bearings. When the carrier operates, there is normal differential action between the wheels at all times. Figure 2.1

What happens when an axle nut is over torque?

Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear. Over torque of the axle nut will cause excessive load and cause the bearing to overheat, this is one of the most common causes

What is the model number of a Spicer axle?

1 – Country or origin 2 – Axle model identification 3 – Specification number assigned to the axle built by Spicer.

What should torque be for rear axle flange?

After having my driver’s side rear axle seal replaced – it is leaking around the flange. The dealer said that this doesn’t have a torque spec – but everything has a torque spec. (doesn’t it?). Anybody know what the torque should be for these bolts?.

What’s the torque of a t axle nut?

Tighten the adjusting nut to a torque of 200 ft-lbs, while rotating the wheel. STEP 3. Initial Back Off: Back the adjusting nut off one full turn. STEP 4. Final Adjusting Nut Torque: Tighten the adjusting nut to a final torque of 50 ft-lbs while rotating the wheel. T AXLE NUT TORQUE TYPE SIZE SPECIFICATIONS

How to adjust the rear wheel bearing torque?

Rotate the hub in the opposite direction to the way the adjuster nut is turning. Ensure the inner bearing and the seal seats against the spindle shoulder. Tighten the adjusting nut to 70 N-m (52 lb ft). 6. Turn the adjusting nut counterclockwise and align the closest lock key slot with the keyway in the axle housing.

What are torque specifications for Chevy axle nut?

2012-2017 There are two types of wheel drive shaft nuts, both of which have different tightening torque specifications. Check the style nut that is on the vehicle when staking the nut. Style 1 nut has the thin collar (1.5 mm) thickness. Style 2 nut has the thick collar (2.7 mm) thickness.

What kind of torque does a Stratus sedan have?

Stratus Sedan 02 – 01 110 145 Stratus Sedan 00 105 142 Stratus Sedan 99 – 95 180 244 Vista 94 – 92 167 226 Vista 4WD 91 – 84 165 224 Vista FWD 91 – 84 165 224 Dodge / Plymouth Truck

How big is the torque cap on a pinion?

Pinion Preload (Reused) Ring Gear Backlash Ring Gear Bolt Torque Carrier Bearing Cap Bolts Chrysler 7.25″ 12 to 14 in-lbs. 6 to 7 in-lbs. .006″ to .010″ 55 ft-lbs.

What is the spec on a pinion nut?

If you are talking about the pinion nut it is not hand tighten. The spec measures the torque required to turn the pinion gear by itself once the nut is tightened. The spec is NOT the torque applied to tighten the nut. That is whatever it takes to achieve the pinon bearing pre-load which is determined as described above.

What should the torque be on a Spicer drive?

(Refer to Charts 1, 2, 3, and 4 for kit numbers, bolt part numbers and recommended torques.) CAUTION: If you have removed or loosened any bearing cap fasteners, ALWAYS replace them with new and torque them to the recommended torque shown on the Charts 2, 3, and 4.

Is there a torque specifications repair guide for Commander?

Find out how to access AutoZone’s Torque Specifications Repair Guide for Commander 2006-2007. Find out how to access AutoZone’s Torque Specifications Repair Guide for 300, 300C & Magnum 2006-2008, Charger 2006-2008. Find out how to access AutoZone’s Torque Specifications Repair Guide for Cherokee, Grand Cherokee, 1999-2005.

What are the torque specifications for a magnum?

Find out how to access AutoZone’s Torque Specifications Repair Guide for 300, 300C & Magnum 2006-2008, Charger 2006-2008. Find out how to access AutoZone’s Torque Specifications Repair Guide for Cherokee, Grand Cherokee, 1999-2005. Find out how to access AutoZone’s Torque Specifications Repair Guide for Canyon, Colorado 2006-2007.

Do you need a factory level torque manual?

DISCLAIMER: This page is not intended to replace the information contained in a factory level service manual and is intended solely as a “Quick” reference. While accuracy is a main goal of this page, it is not guaranteed.

Where can I find the latest torque specs?

Find the most up-to-date torque spec listings in electronic format. FelPro-Only.com is your convenient source for advanced sealing information. It’s the place to learn and share “tricks of the trade,” find proper diagnosis and installation instructions, and enjoy easy access to parts reference.

How much horsepower does a Cummins L10 have?

Cummins L10 Power and torque Power 224 kW, 300 hp @ 2100 rpm Torque 950 lb.ft, 1288 Nm @ 1300 rpm

What are the torques on a SAE Assembly?

SAE Grades 5 & 8 Bolts & Screws – 1″ SAE 1″ SAE TPI Grade 5 14 Grade 8 14 Surface Condition Torque Adjustment Factors Plain Steel, as supplied X 1.0 Plain Steel, degreased X 2.0 Zinc Plated, as supplied X 1.0 Zinc Plated, lightly oiled X 0.9 Galvanised, degreased X 2.1 Galvanised, lightly oiled X 1.1 Heavily greased X 0.7

What happens if your spindle nut is over torque?

It will also leave your spindle nut under or over torque resulting in hub assembly failure. Ensure that you have the correct torque for the application by referring to SKF 457377 torque specification guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life.

What are the torque specifications for a wrench?

The two questions I am referring to are: what size socket do you use for (bolt, nut, part here), and what are the torque specifications for (bolt, nut, part here). The first question I want to ask back is: why are you working on your bike without a service manual?

Why is the torque on my Street Glide wrong?

I had a guy tell me the torque specification on one of my 2015 Street Glide Special videos was wrong because the torque value listed in his service manual was different for his 2008 Road King. Seriously? Well, duh, yeah, different year, make of bike, hell, even a different size of the engine! Of course, it’s going to be different!

How do you adjust the torque of a wheel?

Bearing Lubrication: Lubricate the wheel bearing with clean lubricant of the same type used in the axle sump or hub assembly. STEP 2. Initial Adjusting Nut Torque: Tighten the adjusting nut to a torque of 200 ft-lbs, while rotating the wheel. STEP 3. Initial Back Off: Back the adjusting nut off one full turn. STEP 4. Final Adjusting Nut Torque:

What should the adjusting nut be torqued to?

Torque the adjusting nut to 200 lbf-ft to seat the bearing components. Always rotate or oscillate the wheel while torquing the adjusting nut to ensure that the rollers are fully seated against the cone large rib. 2. Back off the adjusting nut one full turn or until it’s loose. 3. This is where you actually establish end play.

What should the EndPlay be for final wheel bearing torquing?

The adjustment nut is then loosened 1/6 to 1/4 turn, and locked in place with a new cotter pin. As a rule, endplay should be about 0.001 to 0.005 inches. Many vehicles require the wheels to be on the ground for final wheel bearing torquing to OEM specifications.

What’s the correct torquing procedure for front wheel hubs?

Correct torquing procedure done on front wheel hub units using a Ford Explorer as an example. Watch Russ, an ASE certified tech, demonstrate the steps needed to achieve proper torque. Starting with the Ford Explorer on a car lift, Russ demonstrates the first part of the correct torquing procedure.

What are the specs for a torque converter?

Application Spec Flywheel to Torque Converter Bolt 46 ft lb Forward Accumulator Cover to Valve Body 6-10 ft lb Heat Shield to Transmission Bolt 13 ft lb Line Pressure Plug 6-10 ft lb

Is it OK to use torque specs on your car?

Any damage to the vehicle or injury resulting from usage of these materials is 100% the users responsibility. Use of a professional mechanic is suggested if you do not feel comfortable with the instructions. Reproduction of any photography, work or otherwise herein is expressly prohibited without written permission from the publisher

How much torque does a front brake bracket have?

Torque specs: Front caliper bracket bolts – 118 ft/lbs Front caliper bolts – 31 ft/lbs Front brake hose bolt – 30 ft/lbs

What are torque specs for rear caliper bracket?

Note – There has been conflicting torque specs for the rear caliper bracket bolts. GMSI and Motor show 148ft lbs, while a Helms book shows 89ft/lbs. At the time of this edit, the official answer is unknown. I’ll update this as soon as we know the real toque spec. Credit to meerschm and billzie for pointing this out.

How big is a park tool torque wrench?

Recommended Torque Wrenches Park Tools TW-5.2 = 2~14 Nm or 18~124 in lbs. Ratcheting 3/8″ drive. Park Tools TW-6.2 = 10~60 Nm or 88~530 in lbs. Ratcheting 3/8″ drive.

What are the torque specs for a Ford Taurus?

Ford torque specifications TORQUE SPECIFICATIONS FORD/MERCURY/LINCOLN APPLICATION FT-LBS / ( N-m) AXLE SPINDLE NUT PROBE 174-235 (235-319) ALL OTHERS 180-200 (244-271 BRAKE CALIPER BOLT (PROBE) 58-72 (79-98) CONTROL ARM-TO-KNUCKLE NUT SABLE & TAURUS 40-55 (54-75) ALL OTHERS 37-44 (50-60) CROSSMEMBER-TO-FRAME BOLT

How much torque does the axle spindle nut probe have?

FORD/MERCURY/LINCOLN APPLICATION FT-LBS / ( N-m) AXLE SPINDLE NUT PROBE 174-235 (235-319) ALL OTHERS 180-200 (244-271

What are the specs of a 2000 Ford Explorer?

2000 Ford Explorer Specifications 2000 Ford Explorer Engine 4.0L V6 OHV 4.0L V6 SOHC 4.9L V8 Horsepower 160 205 215 Torque 220 240 288 Displacement cc/ci 4025/245 4015/245 4949/302

How much torque does a hub bearing have?

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

Where can I find the torque specification guide?