Where are the pickup coils located on a car?
Where are the pickup coils located on a car?
They are located inside the distributor and function as the trigger for the ignition system to produce spark. The pickup coil monitors the rotation of the distributor and triggers the ignition system at the optimal moment to produce the best timed spark for best engine performance.
What are the symptoms of a fautly distributor pickup coil?
I took some 150 grit sand paper and sanded the contact back to shiny copper. The flexible metal tang center contact for the rotor had a little carbon on it, but wiped off. It was indented though. The cap underneath on each of the eight plug terminals had some oxidation/corrosion on the contacts.
What happens to the pickup coil when the ignition fails?
The pickup coil monitors the rotation of the distributor and triggers the ignition system at the optimal moment to produce the best timed spark for best engine performance. As the ignition pickup essentially functions as the activation switch for the entire ignition system, when it fails,…
Where is the ignition pickup on a distributor?
Electronic ignition pickups are a component found on traditional electronic distributor ignition systems. They are located inside the distributor and function as the trigger for the ignition system to produce spark.
What happens when you change the coil on a Chevy pickup?
The method used to control the dwell time that charges the coil has changed, as well as the grounding or firing circuit. Some of the early-model coils were designed to operate at lower voltages to prevent overheating. They operated in the 6-volt range and required a ballast resister to drop the voltage.
What’s the best way to replace an ignition coil?
Step 4: Replace the pickup coil: Install the new pickup coil, making sure the wire connectors and mounting screws are properly tightened. Reinstall the ignition rotor, distributor cap, and plug/coil wires. Note: Follow steps 1-3 from Method 1 first.
Where are the mounting screws on an ignition coil?
Once the wires are disconnected, remove the mounting screws. They can be located on the face of the pickup coil or on the outside of the distributor. Step 4: Replace the pickup coil: Install the new pickup coil, making sure the wire connectors and mounting screws are properly tightened.
