Other

Where are the fuse panels on a Chevy Astro?

Where are the fuse panels on a Chevy Astro?

Here you will find fuse box diagrams of Chevrolet Astro 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where is the fuse box on a 2005 Chevy Express?

1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover Car Displayed: 2005 Chevrolet Express 1500 5.3L V8 Standard Passenger Van 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5.

Can a blown fuse on an astro be replaced?

Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component in question. If you need to replace a blown fuse in your Astro, make sure you replace it with one that has the same amperage as the blown fuse.

When did the second generation Chevy Astro come out?

In this article, we consider the second-generation Chevrolet Astro, produced from 1995 to 2005.

What is the fuel pump relay wiring diagram?

Fuel Pump Relay Wiring Diagram (Automatic Trans. Only) NOTE: The illlustrations and info in this page apply only to 1994 Chevrolet/GMC pickups with a 4.3L, 5.0L or a 5.7L engine. For the 1993 fuel pump wiring diagram, check out the following article: 1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L).

What was the fuel pump voltage in 1993?

1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L). Should have 10 to 12 Volts DC with Key On Engine Cranking or Key On Engine Running (KOER). This voltage comes from the GRY inline fusible link located in the engine compartment junction block.

How many volts does a fuel pump have?

Should have 10 to 12 Volts DC with Key On Engine Cranking or Key On Engine Running (KOER). This voltage comes from the GRY inline fusible link located in the engine compartment junction block. Should have 10 to 12 Volts DC when the engine is being cranked and relay has activated. Should have Ground all of the time.

Here you will find fuse box diagrams of Chevrolet Astro 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Fuel Pump Relay Wiring Diagram (Automatic Trans. Only) NOTE: The illlustrations and info in this page apply only to 1994 Chevrolet/GMC pickups with a 4.3L, 5.0L or a 5.7L engine. For the 1993 fuel pump wiring diagram, check out the following article: 1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L).

1993 Fuel Pump Circuit Tests (GM 4.3L, 5.0L, 5.7L). Should have 10 to 12 Volts DC with Key On Engine Cranking or Key On Engine Running (KOER). This voltage comes from the GRY inline fusible link located in the engine compartment junction block.

Should have 10 to 12 Volts DC with Key On Engine Cranking or Key On Engine Running (KOER). This voltage comes from the GRY inline fusible link located in the engine compartment junction block. Should have 10 to 12 Volts DC when the engine is being cranked and relay has activated. Should have Ground all of the time.

Some components may have multiple fuses, so make sure you check all of the fuses that are linked to the component in question. If you need to replace a blown fuse in your Astro, make sure you replace it with one that has the same amperage as the blown fuse.

In this article, we consider the second-generation Chevrolet Astro, produced from 1995 to 2005.

1. Getting Started – Prepare for the repair 2. Remove Cover – Locate interior fuse box and remove cover Car Displayed: 2005 Chevrolet Express 1500 5.3L V8 Standard Passenger Van 3. Locate Bad Fuse – Find the fuse that is tied to the bad component 4. Remove Fuse – Take out the fuse in question and assess if blown 5.

Why does my ECM 1 fuse keep blowing?

If the wires leading to the O2 sensor rub against the exhaust, it creates a ground; once the O2 sensor is grounded, the fuse to the ECM 1 blows. The O2 sensor must be installed in a different place to ensure the wires do not short-circuit.

What causes a fuel pump fuse to blow?

When the fuel pump begins to fail it overheats, causing it to drain more amperage (amp); if the amps exceed the amount of amps the ECM 1 fuse allows, the fuse will blow. Replacing the fuel pump should correct this problem. The ECM 1 operates via voltage sent from the battery.

Where is the fuse block on a GMC Sierra?

The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block. Instrument Cluster, DRL Relay, Lamp Switch, Keyless Entry, Low Coolant Module, Illuminated Entry Module, DRAC (Diesel Engine)

Is there a problem with the ECM B fuse?

ECM B fuse blowing 98 Chevy GMC problem found. No start 5.7 Vortec – YouTube ECM B fuse blowing 98 Chevy GMC problem found. No start 5.7 Vortec

How many fuses do you need to start a GM car?

But then you must have two good fuses in the starting circuit, two good relays, several good fuses to the BCM, good fuses to the PCM, and good grounds all around. Click on the image here to pull up a PDF of a typical GM starting system wiring diagram.

Why does the fuel pump fuse keep blowing?

The fuse that is blowing is the one that operates the relay, not the pump circuit. – the relay always has power (key on) and the ECM switches the ground. Old school method I always use in these instances is replace the fuse with a higher amp re-setting fuse like on electric window motors or electric seats!

Where is the fuse on the fuel pump?

Everytime I turn the ignition on, I blow the fuse. The fuse is located in the slot marked ECMI. How do I find out if it is the pump, the relay, or anything else? I am assuming there is a short somewhere. I thought maybe I pinched a wire and am arcing out somewhere.

Why is the fuel pump and relay not working?

The ignition circuit, which includes the ignition switch, controls power to many components, including the fuel pump and relay. If there is an issue with the switch or the circuit, perhaps a wiring problem, then power to the fuel system may be cut off.

When did the Chevy Impala fuse box come out?

In this article, we consider the eighth-generation Chevrolet Impala, produced from 2000 to 2005. Here you will find fuse box diagrams of Chevrolet Impala 2000, 2001, 2002, 2003, 2004 and 2005, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where is the fuse box in the engine?

Fuse box in engine compartment. fuse box location. The engine compartment fuse block is located on the driver’s side of the vehicle, near the battery. fuse box diagram.

Where is the fuse box on a Monte Carlo?

It is located on the driver’s side of the instrument panel, behind the cover. It is located on the passenger’s side of the instrument panel, behind the cover. There are two fuse blocks that are located in the engine compartment, on the passenger’s side.

Where are the fuse panels on a Chevy Silverado?

Here you will find fuse box diagrams of Chevrolet Silverado 2014, 2015, 2016, 2017, 2018 and 2019, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Where is the fuse box located on a Chevrolet HHR?

It is located on the driver side of the engine compartment, under the cover. – A Center High-Mounted Stoplamp Relay and a Rear Access Panel Door Interlock Relay (Panel Van only) are located underhood in front of the left shock tower.

Where is the fuse located on a Dodge Ram?

– The Left Rear Access Panel Door Relay (Panel Van Only), and the Right Rear Access Panel Door Relay (Panel Van Only) are located in the rear of the vehicle behind the right rear quarter trim panel. – A Rear Power Plug mini fuse (Panel Van Only) is located near the battery in the rear of the vehicle.

Where is the fuse box located on a Chevy Astro?

Cluster Illumination, Climate Controls, Chime Module, Radio Illumination, Rear Heat Switch Illumination, Rear Wiper/Washer Switch Illumination, Rear Liftgate Switch Illumination, Remote Cassette Illumination, Overhead Console, Truck Body Control Illumination It is located in the engine compartment.

How does the Powertrain Control Module ( PCM ) work?

The powertrain control module (PCM) works as the central computer system in a vehicle’s mechanism. It is in charge of all the components and their functions. Having such enormous importance in the operation of all the parts means that an issue with it will affect almost every aspect of a car.

What happens if you have a bad PCM in your car?

A failing PCM disrupts the functions of many components along with the engine. As the module becomes unable to read the sensors correctly, the car won’t be able to give its best performance. The state of affairs will cause the check engine and a few other error lights to come on. Auto Transmission: How to Fix When It Does Not Shift to 3rd Gear?

How much does a genuine GM battery tray cost?

New (2) from $47.02 & FREE Shipping . These items are shipped from and sold by different sellers. Show details Only 2 left in stock – order soon. FREE Shipping. Details DORMAN 00587 HELP! Battery Hold-Down Kit $6.39 In Stock. FREE Shipping on orders over $25.00. Details In stock. Ships from and sold by TrunkMonkeyParts. DORMAN 00587 HELP!

What is the fuse box on a Astro?

Cluster Illum, HVAC Controls, Chime Module, Radio Illumination, Rear Heat Switch Illumination, Rear Wiper/Washer Switch Illumination, Rear Liftgate Switch Illumination, Remote Cassette Illumination, O/H Console (Circuit Breaker) Power Door Lock Relay, 6-way Power Seat, Remote Control Door Lock Receiver, Dutch Door Module, Dutch Door Release

What to do if battery tray has corroded?

This was an exact swap. If the tray has corroded then your bolt heads will most likely be corroded too, as mine were. To remove several of mine I had to use a Dremel to cut slots into the heads, then used a flat head screwdriver to remove them.

Where do you find the fuel pump relay?

When you shut off the ignition, it powers down the fuel pump. In most vehicles, the fuel pump relay can often be found in the fuse box in the engine bay, which is usually a long black box which contains fuel pump relay along with various other fuses and relays.

What happens if the fuel pump relay fails?

If the fuel pump relay fails, the fuel pump will receive no power and will not operate, thus it will be silent. Always start with a visual inspection first before moving on to other tests, which will be specified below.

How do you clean a fuel pump relay?

Since any debris will affect the fuel pump relay’s performance, you should regularly inspect and clean it when necessary. The fuel pump relay is an electrical car part, thus be extremely careful when handling a relay. First, take off the relay and use the blower to blow off dirt and dust for about 1-2 minutes.

When does the fuel pump relay shut off?

Once the engine is running, the fuel pump relay shuts off. At this point, the electricity for the fuel pump is supplied by the oil pressure sending unit. When you shut off the ignition, the fuel pump relay is engaged again, long enough to power down and shut off the fuel pump.

Since any debris will affect the fuel pump relay’s performance, you should regularly inspect and clean it when necessary. The fuel pump relay is an electrical car part, thus be extremely careful when handling a relay. First, take off the relay and use the blower to blow off dirt and dust for about 1-2 minutes.

How much does it cost to replace a fuel pump relay?

You can easily find fuel pump relays online or at any automotive spare parts shop.The average replacement cost of the fuel pump relay ranges from $90 to $150, of which $20-$50 is for parts and the remaining is the labour cost.

Where is the fuel pump in a car?

The fuel pump is located in the fuel tank, near the rear of the vehicle and can usually be heard when the engine starts. A healthy fuel pump plus a healthy fuel pump relay will often produce a variation of a low volume hum or whine which can be heard from inside the vehicle, or from the outside, near the fuel tank.

Why are the dashboard lights on my Chevy not working?

If the dashboard lights in your Chevy are dim, chances are you can fix it yourself. If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

What are the warning lights on my dashboard?

So, what is that light on your dashboard? What follows is easily the most complete list available of symbols and warnings that may appear in and on your car’s dashboard or instrument cluster. The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one.

Why is the instrument panel of my car dark?

The Instrument Panel Is Completely Dark If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

Why are the lights on my dashboard not working?

Adjust the dial or knob to see if that fixes the problem. If the switch was accidentally bumped, your dashboard lights might have been turned off. Flip the switch or turn the dial or knob up and see if the lights on your dash come on or get brighter. If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb.

Why are the lights on my car not working?

If it’s light out, make sure that the headlights aren’t turned on. Many headlights often dim the dash automatically when they’re switched on, so this might be the cause of the problem. If that’s not it, look for the dimmer switch.

The Instrument Panel Is Completely Dark If the dashboard isn’t lighting up at all, your car might have blown a fuse. Removing the old fuse and replacing it should get the lights working again. While the new fuse may do the trick, it could also indicate a deeper electrical problem.

What causes a door lock relay to not work?

Power door locks do not function. Power door locks that do not function are another common symptom for a problem with the door lock relay. If the power door lock relay fails, it will cut off power to the entire power door lock system and may cause them to not function correctly.

Power door locks do not function. Power door locks that do not function are another common symptom for a problem with the door lock relay. If the power door lock relay fails, it will cut off power to the entire power door lock system and may cause them to not function correctly.

Is the fuel pump grounded to the frame?

The fuel pump is grounded to the FRAME so the theory is that I am adding a secure ground to the FRAME so that all are securely grounded. The ground straps were only 3 bucks each. No great investment for a stable electrically grounded system. 5 people found this helpful.

Can a Chevy Astro fuel pump be replaced?

When that pressure is too much or too little, not only does your minivan use considerably more gas, but your engine also experiences jolts, surges and loss of power. These results can be reversed with a top-quality fuel pump replacement for Chevy Astro from AutoZone.

What is the diysave10 code for Chevy Astro?

Use Code: DIYSAVE10 Online Ship-to-Home Orders Only Big and powerful, your Chevy Astro surpasses other minivans in its utility and hauling ability. It naturally consumes a high amount of fuel to do its duties.

The fuel pump is grounded to the FRAME so the theory is that I am adding a secure ground to the FRAME so that all are securely grounded. The ground straps were only 3 bucks each. No great investment for a stable electrically grounded system. 5 people found this helpful.

Where is the fuse box in a car?

Fuse box in engine compartment. fuse box location. The underhood fuse block in the engine compartment on the driver’s side of the vehicle near the battery. Lift the cover for access to the fuse/relay block. fuse box diagram. legend. Device Rating Description STUD 1 Fuse

What are the mini fuses in the engine compartment?

Engine Compartment Fuse Block Mini fuses Usage 1 Transmission Control Module Battery 2 Engine Control Module Battery (LTG)/Air 3 Air Conditioning Compressor Clutch (LTG) 4 Air Conditioning Compressor Clutch (LTG)

Where is the fuse block on the floor?

The floor console fuse block is located under the driver seat. The fuse block is located in the engine compartment on the driver side of the vehicle. WARNING: Terminal and harness assignments for individual connectors will vary depending on vehicle equipment level, model, and market.

What is the fuse box diagram for a Chevy truck?

Chevy Truck Fuse Block Diagrams – Chuck’s Chevy Truck Pages Chevrolet truck fuse box diagrams. 1973 – 1979 fuse box diagram. !980 – 1987 fuse box diagram. Great resource if the lettering is worn off yours

Where are the fuse panels on a Chevy Malibu?

Here you will find fuse box diagrams of Chevrolet Malibu 2004, 2005, 2006 and 2007, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Which is the best site to get a fuse diagram?

Horn-Right Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. They include wiring diagrams and technical service bulletins. In most cases, their diagrams are right from the factory manuals. Which one should YOU choose? If you’re tracking down a wiring issue, Eautorepair.net is the better choice.

Where is the fuse block access door located?

The fuse block access door is on the driver’s side edge of the instrument panel. Pull off the cover to access the fuse block.

Where is the relay on a blower motor?

Correction assuming 97 is same (probably is)… Fan relay is as posted before on top of the duct work left of the resistors you can see both behind the glove box if you take it out. The purple wire comes from the relay/resistors according to fan speed selected.

Can a fan switch be replaced on a Tahoe?

I had to replace the fan switch on my old 99 Tahoe. You should be able to run power direct to the motor, Gordy. It will only run in high, but if it doesn’t run with direct power, it’s hooped. OK, I hooked a wire from positive battery post to terminal with the purple wire on the motor. Nothing.

Where are the fuses on a 1993 GM 4.3L?

In the table below you’ll find the fuse location and description of the fuses of the fuse box on 1993 4.3L, 5.0L, 5.7L TBI equipped 4.3L, 5.0L, and 5.7L pickups. IMPORTANT: The fuse box illustration and fuse descriptions cover the vehicles in the ‘Applies To:’ box on the right column.

Where is the fuse box on a car?

IMPORTANT: The fuse box illustration and fuse descriptions cover the vehicles in the ‘Applies To:’ box on the right column. The fuse box is located on the driver side of the dash. Rear Intermittent Wiper/Washer Switch.

Where is the fuse box on a 1993 TBI?

In the table below you’ll find the fuse location and description of the fuses of the fuse box on 1993 4.3L, 5.0L, 5.7L TBI equipped 4.3L, 5.0L, and 5.7L pickups. IMPORTANT: The fuse box illustration and fuse descriptions cover the vehicles in the ‘Applies To:’ box on the right column. The fuse box is located on the driver side of the dash.

How can I tell if my tail lights have a fuse?

When you have located the fuse for the tail lights use a fuse tester to check the connection. If the tester lights up – your fuse is functioning fine. If it does not light up then, replace the fuse with another of the similar amperage and size. In many instances, you can see the break in the metal strip of the fuse.

What are the warning lights on a Chevrolet?

The following are warning lights and indicators found in vehicles built by Chevrolet. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray). There are nearly 50 of them so search carefully!

What are the fuses on a 2001 Chevy Silverado?

Repair Topics > Fuses > Chevrolet > 2001 Chevrolet Silverado… IGN A Fuse #3 40A Starter Relay, Ignition Switch IGN 1. TURN. SEO IGN Fuses PARK LP Fuse #12 30A Park Lamp Relay. Healamp and Panel Dimmer Switch Park Lamps STOP LPS Fuse #14 20A VEH STOP and CHMSL Fuses. Trailer Wiring (LH.

How to troubleshoot no start in a 2001 Chevy Astro van?

Disconnect the coil wire at the ignition coil, and try to start the engine. If no spark occurs, replace the coil and ignition module. If a strong spark occurs, plug the wire back in, and remove a spark plug wire from a spark plug and repeat the test. If a spark is not present, replace the spark plug wires, and distributor cap and rotor.

Where is the fuel pump on a Astro van?

If it is good, check for power at the fuel pump electrical connector located near the rear of the fuel tank on the driver’s side of the van. In the Chevy Astro van, power is supplied to the fuel pump by the the gray wire on the electrical connector when the engine is being cranked.

How are fuses tested in AC and DC?

Our labs can conduct fuse performance testing in AC and DC applications under UL/CSA or IEC standards guidelines. We utilize state-of-the-art instruments and software to provide accurate run-testing services and in- depth analysis. For more information on our test capabilities, please contact Mersen.

How are Mersen square body fuses used in power electronics?

Combine Mersen square body semiconductor fuses with Mersen’s cooling solutions and laminated bus bar offerings for an optimized system solution to support your power electronics designs. As a design partner with extensive application and product expertise, Mersen is able to maximize system performance, lower total costs]

How are semiconductor protection fuses used in power electronics?

ChAPTER 1: SEmICONDUCTOR PROTECTION FUSES PAgE 3 Semiconductor Protection Fuses are used to protect sensitive loads against overcurrent conditions in power electronic equipment. ChAPTER 2: OVERCURRENT PROTECTION DEVICES FOR BATTERY APPLICATIONS PAgE 18

Where is the within reach fuse on a central air conditioner?

The within REACH disconnect is in metal box. It is either a handle that you pull out, within this handler, there is two fuse in the fuse holder. Or there is breaker. If there isn’t disconnect box within REACH, there should be breaker box within 5 feet from the condenser unit. The condenser switches are within the breaker box.

Where do I find the fuse box diagram?

However, sometimes the wire may look intact even in the blown fuse. Fuse box diagrams presented on our website will help you to identify the right type for a particular electrical device installed in your vehicle. Use our website search to find the fuse and relay schemes (layouts) designed for your vehicle and see the fuse block’s location.

Where are the fuses on a ram truck?

Fuse box diagram (fuse layout), location and assignment of fuses and relays Ram Trucks 1500, 2500, 3500 (2013, 2014, 2015, 2016, 2017, 2018). Before replacing a fuse check that the key has been removed from the ignition and that all the services are switched off and/or disengaged.

Where is the fuse in the within reach breaker?

The fuse is within the fuses holder. The within REACH disconnect is in metal box. It is either a handle that you pull out, within this handler, there is two fuse in the fuse holder. Or there is breaker.

What is the purpose of a fuel pump relay?

This feature is not available right now. Please try again later. A fuel pump relay’s job is to take some of the voltage load off of the wiring harness to allow a better current flow from the battery to the fuel pump.

How to test and replace a fuel pump relay?

How to test and replace a fuel pump relay. The principles shown here apply to most vehicles. However, it’s best to check with your vehicle’s repair manual for testing parameters.This specific vehicle is a ’97 Nissan Maxima. — Choosing the best oil filter: Wix XP / Amsoil / Royal Purple..

Is there a line diagram for Astro van?

Or you are a trainee, or perhaps even you who simply would like to know about Chevy Astro Van Vacuum Line Diagram. Whatever you are, we try to bring the web content that matches exactly what you are searching for.

Where is the ignition relay located in a car?

The ignition relay is often located in the fuse box under the hood. It can also be located in a fuse box under the dashboard inside of the car. The ignition relay’s exact location may differ from vehicle to vehicle depending on the design of the vehicle and the company that manufactured it.

How big is a 1983 Chevy Astro van?

I Had Requested A Vacuum Diagram For A 1983 Chevrolet Van That, size: 800 x 600 px, source: www.justanswer.com Repair Guides | Vacuum Diagrams | Vacuum Diagrams | Autozone, size: 800 x 600 px, source: repairguide.autozone.com

Where is the starter relay in the engine?

Schematic shows relay in engine compartment. I am assuming it is on firewall. The only relay I see is the fuel pump. I’m not reading power at purple wire at stater solenoid. Replaced ignition switch. Bypassed park neutral switch reading power there. Checked fuses. What am I missing? have the same problem?

Where is the power window fuse relay located?

That doesn’t make sense…the owners manual says there is a relay labeled PWR/WDO and it shows it along with other relays labeled “relay side” every image I google shows this relay…also there is no fuse anywhere marked for that either…my window is down, its raining 🙁 any suggestions?

The ignition relay is often located in the fuse box under the hood. It can also be located in a fuse box under the dashboard inside of the car. The ignition relay’s exact location may differ from vehicle to vehicle depending on the design of the vehicle and the company that manufactured it.

How to replace a fuel pump in an Astro van?

Astro Van Fuel Pump Replacement – 1996-2005 (GMC Safari) – 4 MINUTE DIY VIDEO – YouTube NOTE: For some reason some models have an additional cover over the gas tank.

Astro Van Fuel Pump Replacement – 1996-2005 (GMC Safari) – 4 MINUTE DIY VIDEO – YouTube NOTE: For some reason some models have an additional cover over the gas tank.

Author Image
Ruth Doyle