Other

Where are the coolant temperature sensors on a Ford Ranger?

Where are the coolant temperature sensors on a Ford Ranger?

Digital Transmission Range (DTR) Sensor Left side of transmission. Engine Coolant Temperature (ECT) Sensor (3.0L) Top front of engine. Engine Coolant Temperature (ECT) Sensor (4.0L) Top right front of engine.

What does the ECT sensor on a Ford Ranger do?

– is controlled by the PCM. The ECT sensor (4.0L): – sends the PCM a signal indicating engine coolant temperature. – resistance decreases as coolant temperature increases. The CHT sensor (2.3L): – sends the PCM a signal indicating cylinder head temperature.

Where is the temp sensor located in the engine?

1. Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect the electrical connector. 2. Remove the CHT sensor. – To install, tighten to 12 Nm (106 lb-in). 3. To install, reverse the removal procedure. He temp sensor for the computer is located in the cylinder head.

What should the temp of the coolant sensor be?

Check that the temperature value of the CTS is around 80-90c when the engine is hot. A lot of engine coolant temperature sensors have two wires and the sensor is controlled by Ohm. Get a wiring diagram and find out what ohms you should have at a specific temperature to check the function.

What are the sensors on a Ford Ranger?

– Engine Coolant Temperature (ECT) sensor (4.0L) – Manifold Absolute Pressure (MAP) sensor (2.3L) – Cylinder Head Temperature (CHT) sensor (2.3L) – accepts input from various engine sensors to compute the fuel flow rate necessary to maintain a prescribed air/fuel ratio throughout the entire engine operating range.

What kind of engine does a Ford Ranger have?

The 2.5 was a stroked (by 7 mm) version of the 2.3 OHC Ford Ranger engine. It also used higher-flow cylinder heads for better intake and combustion. It was replaced in 2001 by the Mazda-derived Duratec 23. In 1979 – 1981 a high compression draw thru carbureted turbo version of the 2.3 was offered.

1. Pull back the Cylinder Head Temperature (CHT) sensor cover and disconnect the electrical connector. 2. Remove the CHT sensor. – To install, tighten to 12 Nm (106 lb-in). 3. To install, reverse the removal procedure. He temp sensor for the computer is located in the cylinder head.

What was the horsepower of a 1983 Ford Ranger?

The engine was carbureted through 1984, and then switched to a multiport electronic fuel-injection system in 1985. In the 1983 Ford Rangers, the horsepower was only rated at 79, but it climbed to 82 in 1983, 100 in 1989 and finally 112 horsepower in 1996. Its top torque rating was 135 foot-pounds.

What are the specs of a 2008 Ford Ranger?

The 2008 Ford Ranger has a standard tire pressure monitoring system, and an iPod jack; options include the off-road package, a 510-watt audio system and Sirius satellite radio. Anti-lock brakes and dual airbags are standard on all versions.

With three different engine options, buyers can choose the power they need out of their 2008 Ford Ranger, but no engine—nor its handling—earns the Ranger strong notices. With the Ranger, Ford offers three engines. The base engine makes 143 hp from a 2.3-liter four-cylinder; stronger versions use a 148-hp, 3.0-liter V-6 or a 207-hp, 4.0-liter V-6.

Are there any recalls on the 2008 Ford Ranger?

Based on information received from our latest subscriber survey, our reliability history charts give you a rundown on how used vehicles are holding up in 17 potential trouble spots, ranging from the engine, transmission, and brakes to power equipment and the electrical system. The 2008 Ford Ranger has been recalled 3 times by NHTSA. View Recalls

New larger fog lights improve visibility, and a Grabber orange exterior color is available for 2008. Rangers come in three sizes, with a choice of two cabs and bed lengths. Regular-cab pickups are available with a 6- or 7-foot cargo bed.

Thanks For Signing Up! Ford’s compact Ranger truck enters 2008 with a more-aerodynamic front bumper and few other changes. The Ranger is available with a four-cylinder or a choice of two V-6s, with either a manual transmission or a five-speed automatic.

What kind of bed does a Ford Ranger have?

New larger fog lights improve visibility, and a Grabber orange exterior color is available for 2008. Rangers come in three sizes, with a choice of two cabs and bed lengths. Regular-cab pickups are available with a 6- or 7-foot cargo bed. Show full review

What are the ratings for the Ford Ranger?

No curtain or side airbags are offered, nor are stability and traction control, but the Ranger scores five and four stars for front and side impacts. Its rollover rating of three stars points out the limits of its taller, older design. The 2008 Ford Ranger has a dated style, inside and out.

Author Image
Ruth Doyle